Plugin - MQ2Wizard 3.1.52471.11

[Sic]

building an update now - if for some reason there are still issues i'll have to take a look tomorrow

 

[ChatWithThisName]

ChatWithThisName updated MQ2Wizard with a new update entry:

05/17/2024

- fixed memorization issue in blend mode

Read the rest of this update entry...

 

[Hank362]

any idea how to fix this from popping up its been happening about a month

 

[Hank362]

Thanks i deleted the wiz.dll and seems to work again

 

[Redderick]

I've purchased Mq2Wizard around May 1st - it's not showing in my purchases anymore and need to redownload it. help.

 

[Sic]

I've purchased Mq2Wizard around May 1st - it's not showing in my purchases anymore and need to redownload it. help.

Your downloads show you downloaded it as recently as a few minutes ago

 

[ChatWithThisName]

I've purchased Mq2Wizard around May 1st - it's not showing in my purchases anymore and need to redownload it. help.

I'm not sure where you are checking, but you do in fact have an active license and have downloaded it recently.

 

[Redderick]

I just went ahead and bought it. I thought I bought it the first time maybe I just had the trial or something.

 

[jhw668]

I just went ahead and bought it. I thought I bought it the first time maybe I just had the trial or something.

There is a period of time where they are put out for free. I'm assuming to find out any problems, iron out the kinks, etc. Once that is finished, they go to a normal paid license.

 

[Kermit]

Cape of Hate's Shadow is automatically added to the Downtime clicky list on each login, duplicating itself multiple times. Since it has no buff effect, it should not be added as a clickable. I have tried removing and deactivating. Thank you!

 

[Sic]

Cape of Hate's Shadow is automatically added to the Downtime clicky list on each login, duplicating itself multiple times. Since it has no buff effect, it should not be added as a clickable. I have tried removing and deactivating. Thank you!

I answered you yesterday.

We don't add shoulder items - only cloaks, mounts, familiars, illusions, and some other items like bps, we don't add duplicates (if an item was on the list, we wouldn't load it automatically), and we dont add items that give the temp effects.

As I mentioned yesterday, it sounds like you have something else doing it and/or adding it to your ini manually.



for cloaks that we add, we actually even disable any other cloaks listed.

a part of me wonders if you're using a bad EQ ui, which has your gear slots incorrect, but it would also mean that you're somehow getting passed the checks on items that dont give buffs, and getting past our duplicate checks.

I wonder if you're mq2wizard_dudebro.ini is file locked or manually edited to read only or something

Here's a wizard with Cape of Hate's Shadow, and you can see not listed in downtime

 

[mmoplayer]

This makes my week

Wiz portal list doesn't seem to find skyfire for me. Druid does. Skyfire 2 this is, but no skyfire at all.

 

[Sic]

Wiz portal list doesn't seem to find skyfire for me. Druid does. Skyfire 2 this is, but no skyfire at all.

weird - i'll take a peak

 

[ChatWithThisName]

ChatWithThisName updated MQ2Wizard with a new update entry:

6/29/2024

- fixed skyfire portal

Read the rest of this update entry...

 

[Nightmare327]

It seems the undershore port spells are missing from the list for the wizard.

 

[Sic]

It seems the undershore port spells are missing from the list for the wizard.

?

 

[Codeguru]

What kind of DPS increase does this have over the basic AF Nuke? Is it noticable?

 

[ChatWithThisName]

What kind of DPS increase does this have over the basic AF Nuke? Is it noticable?

I've never used AFNuke, so I can't honestly say. Maybe one of the users here has used both and can give you a play by play on the differences.

 

[Sic]

What kind of DPS increase does this have over the basic AF Nuke? Is it noticable?

Can try it on the test build with your actual toon/team

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

 

[xxraptorxx]

will the wiz get a GH buff bot option for TP to places?

 

[Sic]

will the wiz get a GH buff bot option for TP to places?

none of the plugins have gh buffbot anymore

you can translocate with the portal stuff, but requires issuing a command

but it sounds like you're asking something like "will we ever be able to request a translocation from an mq2wizard sitting in the guild hall like how buffbot functionality worked"

--- you could actually have that toon run a LEM to achieve that, but we'll probably build something like that in in the future

 

[black_tea]

Somehow I maximized the mq2wizard window all the way across the width of the screen and i can't resize it except up or down. Is there a way to bring is back down? I haven't tried relogging as it's not making it impossible to play, but I will if that's the only way.

 

[Sic]

Somehow I maximized the mq2wizard window all the way across the width of the screen and i can't resize it except up or down. Is there a way to bring is back down? I haven't tried relogging as it's not making it impossible to play, but I will if that's the only way.

it sounds like you docked the window.
if you want to un-dock the window, grab the docking arrow on the top left and drag it from being docked.

 

[xxraptorxx]

trying to disable swarm pets perm, the /wiz useswarmpet off or 1 or false does not work if you just type it unlike the other options it does not tell you what you need to do to enable or disable it and checking the box only works for this session.
thank you

 

[Sic]

trying to disable swarm pets perm, the /wiz useswarmpet off or 1 or false does not work if you just type it unlike the other options it does not tell you what you need to do to enable or disable it and checking the box only works for this session.
thank you

weird, thanks will fix

 

[zarroth]

Need to add a link to this plugin in the top of the commons description page, where the rest of them are linked. Just noticed it was missing.

Also, is it intended that if you're invis with the usemelee option off, that toon will not engage via casting...however, dropping invis they will immediately engage. Looks like UseMelee is also the key to entering combat, unless you manually drop invis. Not a problem, just want to make sure I'm understanding this nuance of how it was intended to work. Seems it should be more consistent between melee toons and caster toons since melee toons have no issue entering combat even while invis as a result, but non-meleeing casters do.

 

[Sic]

Need to add a link to this plugin in the top of the commons description page, where the rest of them are linked. Just noticed it was missing.

Also, is it intended that if you're invis with the usemelee option off, that toon will not engage via casting...however, dropping invis they will immediately engage. Looks like UseMelee is also the key to entering combat, unless you manually drop invis. Not a problem, just want to make sure I'm understanding this nuance of how it was intended to work. Seems it should be more consistent between melee toons and caster toons since melee toons have no issue entering combat even while invis as a result, but non-meleeing casters do.

Yes to the invis question, unless a camp is set or usemelee is on. Across the board. Same with healers

 

[CunningRunt]

Hi Sic, One observation and one request please

1) I have burnallnamed and burnallways turned off but the plugin still casts the burn spells on some named and on fights (raid ) even without me triggering. its not consistent - for the most part the burns are not triggered. Is there some trigger the plugin is using that I am not aware of?
2) Can you please add - use stuns as an option so that if we have it memmed and the tickbox is off then we cna use that manually - this helps with FF when we have to stun shield. Currently it will use the stun when its up.

 

[Darkwynd3]

Hi Sic, One observation and one request please

1) I have burnallnamed and burnallways turned off but the plugin still casts the burn spells on some named and on fights even without me triggering. its not consistent - for the most part the burns are not triggered. Is there some trigger the plugin is using that I am not aware of?
2) Can you please add - use stuns as an option so that if we have it memmed and the tickbox is off then we cna use that manually - this helps with FF when we have to stun shield. Currently it will use the stun when its up.

Are you sure your burns aren't being triggered by burncount? Five is the default, and its not hard to get 5 mobs on xtarget and have the plugin autoburn unintentionally.

 

[Sic]

Hi Sic, One observation and one request please

1) I have burnallnamed and burnallways turned off but the plugin still casts the burn spells on some named and on fights (raid ) even without me triggering. its not consistent - for the most part the burns are not triggered. Is there some trigger the plugin is using that I am not aware of?
2) Can you please add - use stuns as an option so that if we have it memmed and the tickbox is off then we cna use that manually - this helps with FF when we have to stun shield. Currently it will use the stun when its up.

1. check your burncount, I'm gonna assume you have as many mobs on xtarget or more than your burncount
2. no plans on doing that - if you have it memorized we're going to use it (and with priority). if you want to not use the plugin so you can manually do things, you should pause the plugin and then do things manually

Are you sure your burns aren't being triggered by burncount? Five is the default, and its not hard to get 5 mobs on xtarget and have the plugin autoburn unintentionally.

100%, lots of folks forget this important part.

burnalways
burnallnamed - and mob is named
burnnow - manual triggered
burncount

 

[CunningRunt]

1. check your burncount, I'm gonna assume you have as many mobs on xtarget or more than your burncount
2. no plans on doing that - if you have it memorized we're going to use it (and with priority). if you want to not use the plugin so you can manually do things, you should pause the plugin and then do things manually


100%, lots of folks forget this important part.

burnalways
burnallnamed - and mob is named
burnnow - manual triggered
burncount

Yup ok that sit then - so if we dont want to use burncount make it 9999?

 

[Sic]

Yup ok that sit then - so if we dont want to use burncount make it 9999?

burncount uses the mobs on your xtarget window. your xtarget window doesn't have 9999 slots, so no need to go that high =p but yeah, many folks just use "99" because it is easy to type and remember

 

[Nightmare327]

Can I make a suggestion to add the port information from the Druid plugin to the wizard command page, and the plugin Info->Command page? I found it eventually, but that would have helped shorten the search. Luckily I remembered it was on the druid plugin page.

 

[Sic]

Can I make a suggestion to add the port information from the Druid plugin to the wizard command page, and the plugin Info->Command page? I found it eventually, but that would have helped shorten the search. Luckily I remembered it was on the druid plugin page.

sure

you know you can also check the commands tab of the wizard ui for that info too nope i'll add that too

 

[Myysterio]

any chance you can add "usestun" to the future list of stuff for this plugin so you can usemagic nukes for synergy and save your stuns for utility purposes (luas lems etc.)? On raids you dont want to usestun as a nuke like you might in an xp group.

 

[Sic]

any chance you can add "usestun" to the future list of stuff for this plugin so you can usemagic nukes for synergy and save your stuns for utility purposes (luas lems etc.)? On raids you dont want to usestun as a nuke like you might in an xp group.

What spell are you trying to to avoid using ? Are you byosing and then don't want it to use the spell you memorized? Off the top of my head I can't think of a stun we're loading

 

[Myysterio]

What spell are you trying to to avoid using ? Are you byosing and then don't want it to use the spell you memorized? Off the top of my head I can't think of a stun we're loading

wizard stun spell line, cant remember what name is, like teledaka or whatever. i want to use it as a utility stun via lem, but it just keeps casting it. I do have it BYOS'd. Its just that stuns serve a very different purpose than a magic nuke. I guess i dont know that its on magic nuke line, i havent tested it, it's either that or its just like chain casting stuns when they're mem'd without regards to settings.

 

[Sic]

wizard stun spell line, cant remember what name is, like teledaka or whatever. i want to use it as a utility stun via lem, but it just keeps casting it. I do have it BYOS'd. Its just that stuns serve a very different purpose than a magic nuke. I guess i dont know that its on magic nuke line, i havent tested it, it's either that or its just like chain casting stuns when they're mem'd without regards to settings.

If you have it memorized, iteans you want the plugin to use it, so we prioritize using it.

At least at this time, don't plan on putting a toggle

 

[Myysterio]

If you have it memorized, iteans you want the plugin to use it, so we prioritize using it.

At least at this time, don't plan on putting a toggle

Have you done the pal'lomen raid yet? It's the same as the mission, need them stuns up when the mob goes invuln

 

[Sic]

Have you done the pal'lomen raid yet? It's the same as the mission, need them stuns up when the mob goes invuln

You running 54 wizards? Should pause a couple and pause them to do wizard stuff when you need them to. :p

I understand the ask, and the nuances of the ask.