Plugin - MQ2Shaman (1 Viewer) 3.1.52471.11

[Sic]

mark of wenglawks - 15 minute debuff - decreases damage shield and adds reverse damage shield
apparently not on depuff list for cure on shaman nor on shadow knight
sk cure works
radiant cure works
not casting automatically unless im doing something wrong

it doesn't have a cure counter because it is magic

so you'll want to tell your dude to manually cast or react it or somesuch.

edit: btw, mark of wenglawks is the cleric DS/reverse DS which is listed as dispellable, but the mark of vinitras which is what i was guessing you meant to ask about is listed as not dispellable. are you asking about the new shei encounter? I just tried to "remove detrimental 95%" it with about 6 different things and it was not dispellable

 

[Lovemate]

OK, could not find any posting related to what is happening now that was recent, but my 105 Shammy keeps casting talisman of the doomscale rkII over and over while the whole group has higher level Shammy buffs on.

sorry if this was answered recently but I tried looking but could not find anything.

 

[Sic]

OK, could not find any posting related to what is happening now that was recent, but my 105 Shammy keeps casting talisman of the doomscale rkII over and over while the whole group has higher level Shammy buffs on.

sorry if this was answered recently but I tried looking but could not find anything.

Combat Assist - MQ2Shaman - Extra info

www.redguides.com

Q. Shaman is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation, or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built in everquest feature - right click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

This is particularly a problem with the focus line, especially if you have a large level gap between the shm and your bst/clr (particularly if your shm is lower than the bst/cleric) - you can run into issues where mq2 says that it will stack, but then your armor of line will not actually allow it. Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you.

 

[Lovemate]

Combat Assist - MQ2Shaman - Extra info

www.redguides.com

Q. Shaman is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation, or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built in everquest feature - right click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

This is particularly a problem with the focus line, especially if you have a large level gap between the shm and your bst/clr (particularly if your shm is lower than the bst/cleric) - you can run into issues where mq2 says that it will stack, but then your armor of line will not actually allow it. Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you.

Thanks Sic,

But the red error text I am getting on the whole group is as follows in the pic attached and is just a higher level shammy spell. And is not really one I want to block either one of them. either my Shammy's or the higher one.

 

[Sic]

Thanks Sic,

but the red error text I am getting on the whole group is as follows in the pic attached and is just a higher level shammy spell.

yep, indeed. so block the spell you don't want.

figure out which part of that spell doesn't stack, and have your toons add it to their blocked buffs as the FAQ explains.

or you can byos and just not do any buffing

or you can /shm usefocus off and not do focus buffing

but you can't "not block anything, leave usefocus on, and not byos" or it is going to continue to do the thing as you are seeing it and as the faq explains



this is the stuff the FAQ explained

 

[burdsjm]

yep, indeed. so block the spell you don't want.

figure out which part of that spell doesn't stack, and have your toons add it to their blocked buffs as the FAQ explains.

or you can byos and just not do any buffing

or you can /shm usefocus off and not do focus buffing

but you can't "not block anything, leave usefocus on, and not byos" or it is going to continue to do the thing as you are seeing it and as the faq explains



this is the stuff the FAQ explained

I’d recommend turning off usefocus since he’s not max level and some shaman buffed him with the 115 focus. If he is max level he needs to go buy some spells.

 

[Sic]

yup, if only i provided any of that information

 

[burdsjm]

yup, if only i provided any of that information

I didn't mean it like that, I just meant out of the options you provided, I wouldn't block higher level buffs over UseFocus=0

I'm super tired from grinding to 120 and maxing out aa's :P

 

[Sic]

I didn't mean it like that, I just meant out of the options you provided, I wouldn't block higher level buffs over UseFocus=0

I'm super tired from grinding to 120 and maxing out aa's :P

i wasn't talking about you :p

 

[Fennil]

Sic, have you updated the GHBuffBot portion? just curious since STFocus did Unity of the Kromrif on my 116 shaman instead of Unity of the Vampyre


Thank ya as always for your work, been using shaman for about a month or so now and loving how good he runs with this one

Edit.: Looks like he does buffme Unity of the Vampyre but it takes him about 2 minutes to do it

 

[Sic]

Sic, have you updated the GHBuffBot portion? just curious since STFocus did Unity of the Kromrif on my 116 shaman instead of Unity of the Vampyre


Thank ya as always for your work, been using shaman for about a month or so now and loving how good he runs with this one

Yup, we had the plugins updated before release.

You will want to make sure you're running MQ "Next"

> New Spells? <

> How do next?! <

Hey all,

If you are not on Next and you want to take advantage of the updates done for the new expansion you'll have to convert to using MQNext. Since redguides is transitioning to Next as their only build in the near future we started updating the new spells lists with the understanding that the Legacy version of Very Vanilla would no longer be supported at redguides, so opted not to update the spells for Legacy.

With that said all the spells have been updated. But only on Next. So when you're ready to enjoy the new expansions and the new abilities that come with it, you'll need to migrate to Next.

If you're not aware there is a MacroQuest Migration tool available to help you transition from Legacy to Next and get you moving in the right direction in short order. If just the overview for the resource for the migration tool isn't enough for you and you need a little bit more assistance you can always check out the guide done by Sic.

For those of you that were asking if the spells were updated for the new Expansion or reported issues with the plugins not casting new spells when manually memorized and are still using the Legacy version of Macroquest, we apologize for the inconvenience. We've been pushing to get people moved over to next to avoid issues like this and we don't want to leave you behind. So join us on the "Next" iteration of MacroQuest!


CWTN/Sic

 

[Dragonslayer]

"UseMelee" broken since last update?
Despite having "UseMelee" active my shammy doesn't melee anymore. Even if I start melee, he stops melee immediately.
Am I missing something?

 

[Sic]

"UseMelee" broken since last update?
Despite having "UseMelee" active my shammy doesn't melee anymore. Even if I start melee, he stops melee immediately.
Am I missing something?

sounds like you don't have an MA set properly, or your other assistat values - camp, health, assistat etc

have not had any issues with usemelee here

 

[Dragonslayer]

The shammy does assist, slows, heals, dots, nukes ... just doesn't melee anymore.
I didn't change anything on purpouse in the configurations.

 

[Sic]

The shammy does assist, slows, heals, dots, nukes ... just doesn't melee anymore.
I didn't change anything on purpouse in the configurations.

Tech - - No Meshes?! CWTN Doesn't Work?! No Movement in ToL?!

Howdy All, With this newest expansion from everquest, there are new zones. With new zones, you need navigation meshes for mq2nav, easyfind, and anything else that uses mq2nav to move around to be able to do all the navigation stuff that you're used to. This includes the cwtn plugins for modes...

www.redguides.com

are you sure you haves meshes loaded?


like i mentioned, no issues on all of the toons here and all of the other people running the plugins.

 

[Kiltmedead1]

Hi, I'm relatively new to the plugins and can not keep the cleric from chain casting Unified Assurance or the shaman from casting Unity of Wulthan on pets. It's probably an easy fix but not finding any solutions. Any help will be greatly appreciated. They cast till oom or below 20% then tank won't pull :/

 

[Sic]

Hi, I'm relatively new to the plugins and can not keep the cleric from chain casting Unified Assurance or the shaman from casting Unity of Wulthan on pets. It's probably an easy fix but not finding any solutions. Any help will be greatly appreciated. They cast till oom or below 20% then tank won't pull :/

Kiltmedead1,

I'm sorry you're having issues.

Please make sure to take time and look at the > Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <

Each of the plugins has a discussion thread (which you should post questions about them into - instead of willy nilly places)

and each of the plugins has a FAQ which is a really good spot to look at this, and in this case, answers your question.

From shaman FAQ:
Q. Shaman is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation, or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built in everquest feature - right click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

This is particularly a problem with the focus line, especially if you have a large level gap between the shm and your bst/clr (particularly if your shm is lower than the bst/cleric) - you can run into issues where mq2 says that it will stack, but then your armor of line will not actually allow it. Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you.\


From cleric FAQ:
Q. Cleric is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq2 reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast.

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

Q. I don't want the plugin to cast xyz buff on a toon.
A. Any buff you don't want cast upon someone, you would just have that character add it to their blocked buffs.

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

Q. Why does my bst keep recasting Spiritual V line on my cleric?
A. I explain this in the mq2cleric video > HERE <. TL;DR - Spiritual V doesn't stack with yaulp, so when yaulp fades, if you don't have the spiritual V line blocked on your cleric, your bst will say "oh snap, my cleric needs spiritual V" and then when cleric uses yaulp, it will overwrite spiritual V - then when it fades we rinse and repeat.


so the tl;dr is - figure out what spell you don't want and/or is causing you issues, and block that spell on that character/pet

 

[Kiltmedead1]

Thank you for the quick response and help. I eventually had to turn on BYOS for the cleric to get it to stop. I had blocked all the spells on pets and even group members without affecting the issue first. I even took the pets away and it persisted with the shaman as well. I eventually turned off Focus for him.
Again, thank you for your time.

Thank you for the quick response and help. I eventually had to turn on BYOS for the cleric to get it to stop. I had blocked all the spells on pets and even group members without affecting the issue first. I even took the pets away and it persisted with the shaman as well. I eventually turned off Focus for him.
Again, thank you for your time.

Well I did everything you asked and eventually just deleted everything from VeryVanilla down, all files. I reinstalled all plugins, updated all files, and logged in my shaman, he stood there alone recasting Talisman of Wulthan Rk. II over and over. I clicked off the buffs he put on himself, he still is doing it, I'm at a loss. He casts till he is so low tank won't pull.

 

[Sic]

Well I did everything you asked and eventually just deleted everything from VeryVanilla down, all files. I reinstalled all plugins, updated all files, and logged in my shaman, he stood there alone recasting Talisman of Wulthan Rk. II over and over. I clicked off the buffs he put on himself, he still is doing it, I'm at a loss. He casts till he is so low tank won't pull.

doing the things you mentioned: reinstall plugins, updating files, logging in and out - these all are not going to do anything

you have to block the triggered spells from the spell as the info i shared with you mentioned.

the focus spells cast 4 sub-spells, you need to figure out which one is the issue and block it specifically on the character that is getting spam buffed.

Talisman of Wulthan Rk. II trigger-casts these 4 spells:
Mammoth's Force III
Preeminent Foresight III
Wulthan Focusing Rk. II
Spirit of Resilience Rk. II



so as i shared before the thing that said
"Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you."

or turn off usefocus

/shm usefocus off

 

[Kiltmedead1]

Kiltmedead1,

I'm sorry you're having issues.

Please make sure to take time and look at the > Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <

Each of the plugins has a discussion thread (which you should post questions about them into - instead of willy nilly places)

and each of the plugins has a FAQ which is a really good spot to look at this, and in this case, answers your question.

From shaman FAQ:
Q. Shaman is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation, or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built in everquest feature - right click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

This is particularly a problem with the focus line, especially if you have a large level gap between the shm and your bst/clr (particularly if your shm is lower than the bst/cleric) - you can run into issues where mq2 says that it will stack, but then your armor of line will not actually allow it. Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you.\


From cleric FAQ:
Q. Cleric is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq2 reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast.

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

Q. I don't want the plugin to cast xyz buff on a toon.
A. Any buff you don't want cast upon someone, you would just have that character add it to their blocked buffs.

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

Q. Why does my bst keep recasting Spiritual V line on my cleric?
A. I explain this in the mq2cleric video > HERE <. TL;DR - Spiritual V doesn't stack with yaulp, so when yaulp fades, if you don't have the spiritual V line blocked on your cleric, your bst will say "oh snap, my cleric needs spiritual V" and then when cleric uses yaulp, it will overwrite spiritual V - then when it fades we rinse and repeat.


so the tl;dr is - figure out what spell you don't want and/or is causing you issues, and block that spell on that character/pet

Thank you for the quick response and help. I eventually had to turn on BYOS for the cleric to get it to stop. I had blocked all the spells on pets and even group members without affecting the issue first. I even took the pets away and it persisted with the shaman as well. I eventually turned off Focus for him.
Again, thank you for your time.

Well I did everything you asked and eventually just deleted everything from VeryVanilla down, all files. I reinstalled all plugins, updated all files, and logged in my shaman, he stood there alone recasting Talisman of Wulthan Rk. II over and over. I clicked off the buffs he put on himself, he still is doing it, I'm at a loss. He casts till he is so low tank won't pull.

Shaman is 110, so are other toons, have plugins on all but beast who is intermittent in group and the bard (none available). All toons in that group are 110.

 

[Sic]

@Kiltmedead1 please do not post pictures of your characters.

Please read and follow the following:

you have to block the triggered spells from the spell as the info i shared with you mentioned.

the focus spells cast 4 sub-spells, you need to figure out which one is the issue and block it specifically on the character that is getting spam buffed.

Talisman of Wulthan Rk. II trigger-casts these 4 spells:
Mammoth's Force III
Preeminent Foresight III
Wulthan Focusing Rk. II
Spirit of Resilience Rk. II


so as i shared before the thing that said
"Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you."

or turn off usefocus

/shm usefocus off

 

[Kiltmedead1]

doing the things you mentioned: reinstall plugins, updating files, logging in and out - these all are not going to do anything

you have to block the triggered spells from the spell as the info i shared with you mentioned.

the focus spells cast 4 sub-spells, you need to figure out which one is the issue and block it specifically on the character that is getting spam buffed.

Talisman of Wulthan Rk. II trigger-casts these 4 spells:
Mammoth's Force III
Preeminent Foresight III
Wulthan Focusing Rk. II
Spirit of Resilience Rk. II



so as i shared before the thing that said
"Or the Wulthan Focusing portion of Talisman of the Wulthan doesn't stack with the cleric Armor of ___ line, so you need to block "Wulthan Focusing Rk. III" on your cleric, if you do the Rk. III it will block all ranks from you."

or turn off usefocus

/shm usefocus off

He has no others buffs on him from any toon. he is by himself in group, I turned off Usefocus and he now recasts responsive spirit over and over. self buffing till oom.

 

[Sic]

He has no others buffs on him from any toon. he is by himself in group, I turned off Usefocus and he now recasts responsive spirit over and over. self buffing till oom.

You were talking about talisman which is not responsive spirit

if you do not want to use responsivespirit you can turn off using responsivespirit.

> MQ2Shaman Commands <
/shm UseResponsiveSpirit true/false/on/off/0/1 - Use Responsive Spirit

/shm useresponsivespirit off

 

[Sic]

@Kiltmedead1 since now we're also talking about other things as well, can you just confirm something for me

is your character currently silver, where it was previously gold wth rank 2 spells?

that is an issue with MQ atm, it is going to happen on any toons that are silver with rank 2 abilities unfortunately we have an open issue > here < for the MQ devs (not that it helps you, but just know that we know about it).

if *THAT* is the case, this is a known issue and unfortunately, we don't have an update on when that might get resolved. Blocking and such likely wouldn't resolve this issue in particular, so you would likely need to byos in the mean time (or subscribe your toon)

 

[Kiltmedead1]

I just spent 3 hours with a friend going over spells with my 110 shaman and cleric and his 110 shaman. I have rank II spells and he does not. All plugins exactly the same and we clicked off spells as we went as they kept perma-casting on my shaman. Have you heard of anyone buying the ability to use rank II spells from DB cash to fix the issue? I will try it tomorrow, hopefully so or will have to abandon them and bring up some new toons.... . Any other suggestions would be helpful, looked into deleting the rank II spells, but found nothing on any posts that were helpful. Thanks again for your time. Hate to abandon them though, full set of snowbound, conflagrant alternate pieces, 110 weapons, and dropped a krono on them to max AA. Did it to all six toons but at least the melee don't seem to have an issue. (fingers crossed)

 

[Dragonslayer]

View attachment 35759

Tech - - No Meshes?! CWTN Doesn't Work?! No Movement in ToL?!

Howdy All, With this newest expansion from everquest, there are new zones. With new zones, you need navigation meshes for mq2nav, easyfind, and anything else that uses mq2nav to move around to be able to do all the navigation stuff that you're used to. This includes the cwtn plugins for modes...

www.redguides.com

are you sure you haves meshes loaded?


like i mentioned, no issues on all of the toons here and all of the other people running the plugins.

No meshes loaded yet ... will update meshes now and report back. Many thanks, havn't thought about meshes.

 

[Dragonslayer]

Have copied "meshupdater.exe" manually into folder "MQNext\resources" hoping it will update meshes in folder "MQNext\resources\MQ2Nav".
Than Started Meshupdater.exe and did the mesh-updates.
Is that the right way to get meshes updated in the right folder-position?

 

[ChatWithThisName]

Have copied "meshupdater.exe" manually into folder "MQNext\resources" hoping it will update meshes in folder "MQNext\resources\MQ2Nav".
Than Started Meshupdater.exe and did the mesh-updates.
Is that the right way to get meshes updated in the right folder-position?

Until the launcher is updated, that is the recommended method of using the updater to get meshes.

 

[Dragonslayer]

Did the mesh-updates b4 launching eq.
Shamie started meleeing better like ever
Issue solved.

Conclusion: if your char doesn't want to meele: update your meshes

 

[Husky87]

Hello, I seem to be having issues with saving my VV options when I log out and back in. For example, When I log in to my shaman I don't want it to cast group shrink so when I log in I have to reload my UI and then click on group shrink to turn it off. The same goes for all my other toons aswell. How do I properly save the setting I chose with the CTWN class plugins.

 

[Sic]

Hello, I seem to be having issues with saving my VV options when I log out and back in. For example, When I log in to my shaman I don't want it to cast group shrink so when I log in I have to reload my UI and then click on group shrink to turn it off. The same goes for all my other toons aswell. How do I properly save the setting I chose with the CTWN class plugins.

howdy husky,

Please make sure to post in the correct location.

this is an mq2shaman question (the specific group shrink example) so you would post in the mq2shaman discussion thread, for example. Or more broadly would go in the CWTN section.

> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First!< ​

Please make sure to take the time to check out the stickied information. That link will show you all of the things including:

a. the UI information
b. how to find FAQ
c. how to find commands
d. answers to questions you didn't know you had

The very first item in all of the FAQ is:

Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10 <

this means use the > MQ2Shaman Commands < to adjust settings if you want to save them

so something like turning off group shrinking would be /shm UseGroupShrink off

 

[lilwizzie]

Hello, I seem to be having issues with saving my VV options when I log out and back in. For example, When I log in to my shaman I don't want it to cast group shrink so when I log in I have to reload my UI and then click on group shrink to turn it off. The same goes for all my other toons aswell. How do I properly save the setting I chose with the CTWN class plugins.

Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10 <

 

[Husky87]

Does that apply to all the CWTN class plugins?

 

[Sic]

Does that apply to all the CWTN class plugins?

The very first item in all of the FAQ is:

yup sure does it is the first item in all of the FAQ for all of the cwtn plugins and is spoken about in the CWTNUI video. definitely check out that sticky post i shared. goes over all of the stuff.

 

[Kiltmedead1]

howdy husky,

Please make sure to post in the correct location.

this is an mq2shaman question (the specific group shrink example) so you would post in the mq2shaman discussion thread, for example. Or more broadly would go in the CWTN section.

> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First!< ​

Please make sure to take the time to check out the stickied information. That link will show you all of the things including:

a. the UI information
b. how to find FAQ
c. how to find commands
d. answers to questions you didn't know you had

The very first item in all of the FAQ is:

Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10 <

this means use the > MQ2Shaman Commands < to adjust settings if you want to save them

so something like turning off group shrinking would be /shm UseGroupShrink off

Hey Sic, good news! in the DB store they sell a Spell Rank Cap Increase for 750 DB, if you don't have a gold account you can view it. Under Overseer -> Services all the way at the bottom. Fixed the issues after purchase and relog. Hope this helps others
It was definitely the rank II spells causing the issue.

sorry for responding to wrong post /shrug....

 

[Douler]

Hi Sic,

On trash in UP my tank is getting the debuff :



But the shaman (mq2shaman) won't cast Radiant Cure either in combat or out of combat so I'm casting it manually to cure it. Is this intended?

Use Cures is checked off also and normally it isn't an issue with cures.

Thanks!

 

[Sic]

Hi Sic,

On trash in UP my tank is getting the debuff :

View attachment 35864

But the shaman (mq2shaman) won't cast Radiant Cure either in combat or out of combat so I'm casting it manually to cure it. Is this intended?

Use Cures is checked off also and normally it isn't an issue with cures.

Thanks!

this isn't curable
not only does it not have regular counters, but even a "remove a detrimental effect" wouldn't work as this spell is not dispellable (at least i have yet to have it dispelled with a "90% to remove a detrimental" this isn't the same as the 114 cleric casted version.

sorry, i thought you were asking about Mark of Vinitras from the mission.

this one would be dispellable with one of the "can remove 1 random detrimental" spell

but we currently don't handle that

I actually *DID* all the work for it because of vinitras, and then deleted it once i saw it was nodispell - I'll look into this sometime soon

 

[mcbaine2]

Having some issues with Shaman focusing on anything other than healing during fights. On TLP so only level 70. By the red line during this fight my shaman was at 70% mana, 3 group members were at 30% hp with two mobs in camp. I had to pause there and manually spam heals to keep my group alive. He focused on casting a single Mending spell, then canni, then malos on a mob, then canni again. His stance is currently in HEAL. Is there something I have set wrong?

 

[Sic]

do you have all your xtarget slots fill up and not-auto populating with mobs?

 

[mcbaine2]

I have 3/5 filled with out of group members (not in the zone) at the moment so slot 1 and 2 populate with mobs