• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Druid

Plugin - MQ2Druid 3.1.52471.11

The nukemanamin field still not saving for me. Any thoughts on how I can fix it? all the other fields are saving fine with the slash commands.
 
Question: Talisman of the Unforgetable

Druid and Shaman shares this same line of buffs and either class can override the other. Any chance that either class can check against this line and if they have it not a need to cast it? it seems shaman and druids are just back to back Buffing

Shaman and druid Regen Spell same ID number

1702473581840.png

Thanks
 
Right click one or the other in spells window and block spell. It'll stop chain casting on that toon with most luas/plugins/macros if you do that.
 
Question: Talisman of the Unforgetable

Druid and Shaman shares this same line of buffs and either class can override the other. Any chance that either class can check against this line and if they have it not a need to cast it? it seems shaman and druids are just back to back Buffing

Shaman and druid Regen Spell same ID number

View attachment 54512

Thanks
KS - please post in the respective thread. I know you are talking about 2 plugins, but pick one and post there. creating an entire thread about 1 spell is just a waste, and then people go off-topic and it creates even more work for me.

I'll take a look if this check is missing a flag, bu I would suggest turning off useregen on one of them, which is the correct course of action in this case
 
yeah, i was contemplating to post this on the druid thread and figured i would be flagged to post it on the shaman thread. my bad sic, and thanks
 
yeah, i was contemplating to post this on the druid thread and figured i would be flagged to post it on the shaman thread. my bad sic, and thanks

from shaman FAQ
Q. Shaman keeps recasting Regen line (Talisman of the Enduring)?
A. If you are 101+ you shouldn't have UseRegen on - dicho/dissi/composite overwrites your talisman regen line, which will make you recast your regen buff after every fight.

I would also make sure that you're aware of why, as a current level shaman you should turn off useregen (and if you're a druid with a shaman why you should turn it off)
 
from shaman FAQ
Q. Shaman keeps recasting Regen line (Talisman of the Enduring)?
A. If you are 101+ you shouldn't have UseRegen on - dicho/dissi/composite overwrites your talisman regen line, which will make you recast your regen buff after every fight.

I would also make sure that you're aware of why, as a current level shaman you should turn off useregen (and if you're a druid with a shaman why you should turn it off)
i use the regen line on the other bots. maybe im misunderstanding? some of my bots are not in the same group as the shaman or the druid.
 
i use the regen line on the other bots. maybe im misunderstanding? some of my bots are not in the same group as the shaman or the druid.
well I didn't know your use case - you just mentioned a circumstance that would require druid/shaman trying to do the same things on the same toon - which usually means in the same group.

was just trying to give you more information
 
At 85 I dont see Sundew blessing loading in the layout for healing or hybrid is this intended?
 
At 85 I dont see Sundew blessing loading in the layout for healing or hybrid is this intended?
we only use it in heal loadout, not in hybrid or dps. it goes in gem5, if you don't have sunblessing line you memorize sunraydot in that slot.

in hybrid/dps we put twincast -> sunraydot
 
Just a quick question...What is "UseSpiritWood"? I didn't see it listed in the Command section.

Vrak
 
Just a quick question...What is "UseSpiritWood"? I didn't see it listed in the Command section.

Vrak
if you mouse over the item in the window it will tell you "Will use the Spirit of the Wood AA line"
 
Thanks Sic, appreciate it. I kinda figured that but wanted confirmation from someone who "knows".

Vrak
 
1703365891079.png

I am getting this message when I load my toons through MQ. It only started recently (today) and once I cleared it the toons loaded with no issue. Is there a setting I messed up? Anyone able to help me fix this?
 
View attachment 54950

I am getting this message when I load my toons through MQ. It only started recently (today) and once I cleared it the toons loaded with no issue. Is there a setting I messed up? Anyone able to help me fix this?
If you have already checked the RG Launcher Plugin Tab then read the following:
- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]
 
Redguides,
Thank you Sic, CWTN, programmers, and the community that make this place awesome. My current group is PAL / SHA / ENCH / BST / MAG / DRU. All are 115 with max AA's, TOL T1, and various blood-soaked items. I play on Test so gear is not always the grind focus. My augs are mostly Sebilisian and Conflagrant which is why I started farming Zlandicar in COV. Here are some observations about MQ2Druid in DPS Mode:
Bard only for mana regen doesn't cut it.
Ench alone for mana regen doesn't quite have the juice either.
I found using a BST as the other mana generator keeps the Druid well within a working range for my needs.
Yesterday was the first time I recall hitting 1 mil DPS on anything. My druid is wrecking shop on Zlandicar! After 54 seconds until dead none of my other chars will catch her. She is 5 for 5 on top DPS parse.
Thanks for taking the game we love and making experiences better :woop:

Screenshot 2023-12-27 155959.png
 
Have been enjoying this, but thoughts for healing mode (how I run mine most of the time):

[This is healer mode, with Nukes and dots on, though dots off doesnt seem to change the one dot it casts, and all the aa nukes on. Growth / Reptile / Skin are off. Burnalways is off. Pal, Dru, Brd, Bst, Rng, Ber group]


Using Mythical Moonbeam (Cold DoT) over 1 of Mythic Frost (the atk/ac debuff + hToT cold line) or the other Moonbeam line (ac/cold debuff + hToT) is kind of odd. Mythical Moonbeam also seems to sit incredibly low on the priority list (or is possibly set for burns only, as I only see it cast on nameds when burnalways is off) that I was starting to think it was a different cold spell line instead.

I know Sundew Blessing isnt updated because its just used for the procs, but heal druid is mana efficient enough (thanks to being horrifically cooldown inefficient), that over a few 4 hour sessions the last few days chain-pulling in both T1 and T2 zones, it was spending more time at full mana with nothing to cast than it was at under 90%. Its only real mana expenditure comes when it casts Ecliptic into the chain of Tempest, Remote, 3 aa nukes, Tempest.

The only other real issue I saw was that the usage for convergence of spirits is less than expected; it would be available and unused at times the druid would start hardcasting an X-vida heal.


I know healers start getting into the territory of "everyone wants everything a little different", but those are the things that have been standing out to me the last few weeks.
 
howdy itssteeeeeve

sounds like it is doing great then, because convergence of spirit is used as an emergency heal :p so you wouldn't see it fire very often (and shouldn't)

Please make sure to check out the "how to ask for help" sticky - saying "the one dot it casts" doesn't help me answer/understand at all - all dots should respect usedots, and if something doesn't we need to know so we can adjust it.

other than GoM/Twincast usage - Moonbeam is the first dot we check.

Don't really plan on changing sundew - a lot of people have a terribly bad time keeping their druid with mana, and just because you personally dont - due to group or gear or whatnot, isn't enough reason to change it

if you're sitting so flush with mana / heals, you might consider trying hybrid or even dps *loadout* (not mode)
 
A+ for the IMGUI change on this.. having the portals integrated into the same window is amazing. I was previously manually portaling, now with this will make it easier to utilize. Just wanted to provide some positive feedback on that!

Thank you for the update.
 
Is there a way to stop casting strength buffs? My box team are all 70 right now and my druid keeps spamming Lion's Strength on my SK's pet, but it has an aura effect from my Mage's Earthen Strength that keeps overwriting it (which also can't be disabled in mq2mage settings as far as I can tell).
 
Is there a way to stop casting strength buffs? My box team are all 70 right now and my druid keeps spamming Lion's Strength on my SK's pet, but it has an aura effect from my Mage's Earthen Strength that keeps overwriting it (which also can't be disabled in mq2mage settings as far as I can tell).
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

please check the class FAQ about that (and subsequently about how to block buffs) - skipping the sticky and understanding how/where to get the commands/faq substantially hinders your ability to enjoy things to their fullest
 
Thanks, I did check the faq, but I have a bad habit I need to break of just trying to quickly search for what I'm looking for rather than reading the whole thing. I was focused on "strength" since I knew the plugin already had options to toggle certain spell buff lines. Somehow I missed the blocked buff section, sorry for being THAT person. Ugh, god, SMH.

Probably have a case of inattentional blindness. This happens to me a lot. Things will be in plain sight and somehow they don't register in my brain. It's frustrating and embarrasing.
 
Hello. I have seen in the FAQ about problem that druid keeps spamming snare. Well in my case starting from scratch, the druid does not cast snare on mobs. Even when put as BYOS. And I do not see any section of using snare except the use AA snare. Any way to toggle to use snare? At lower levels (starting from scratch on TLP server with wierd restriction set by myself so not going to fly in levels) its quite crutial to snare fleeing mobs.

Thanks.
 
Hello. I have seen in the FAQ about problem that druid keeps spamming snare. Well in my case starting from scratch, the druid does not cast snare on mobs. Even when put as BYOS. And I do not see any section of using snare except the use AA snare. Any way to toggle to use snare? At lower levels (starting from scratch on TLP server with wierd restriction set by myself so not going to fly in levels) its quite crutial to snare fleeing mobs.

Thanks.
what specifically? you didn't say and we're not mind readers :p

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

the "how to ask for help" thing might be useful for you.

"even when put as byos" --- what spell? did you review the byos/byos-custom stuff? because we don't cast things the plugin doesn't say we cast.

so... what spell?

Assuming you're asking about the basic Tangling weeds / snare -> entangle etc line - no, the plugin doesn't say it uses it, so memorizing it wouldn't do anything.

the AA entrap is at lvl 64 in PoP, but sounds like by your message you're slumming in

currently we dont, no.
 
Oh sorry, yeah I meant level 1 spell Snare, and root. But you already answered my question that the plugin does not use those spells so I will just make a macro myself to do it. THanks.
 
Plugin - MQ2Druid

Users who are viewing this thread

Back
Top
Cart