• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Cleric

Plugin - MQ2Cleric 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (94) Reviews (33) History Discussion Terms and conditions
I do have on retort, still doesn't maintain. Maybe it's a bug on my side? I'm not sure.

Also.. Why not populte Spell gem 14? Whole spell gem unused. :p
 
@RedQueen re: retort

1756403445374.png

as soon as we have mobs on xtarget it immediately casts retort as expected.

let me check if it isn't getting double checked if we're meleeing.

I would humbly request you do the following in the future:

- please provide information to help you
- - there is a "how to ask for help" in the sticky
- - i need things like your settings/circumstances otherwise im guessing.
- please read the replies, we've had a few recently back and forths where i've had to repeat things i already said
 
RedQueen said:
I still don't see a reason for not supporting the 14th slot, though.
Click to expand...
Imo, adding that gem slot was a "low hanging fruit" for reason to get the expansion, almost no classes "needed" an extra slot - some classes don't even have anything extra to use.

We do use it if a spell is in it - byos or not-byos

As I mentioned, over the past 9+ months I've talked about it a few times, and until otherwise, classes that we don't slap something in there will have it empty, this isn't "lazy" or "dont care" it is intentional.

I suspect we're going to get another entire full spell line in the new future for all spell classes and don't want to get pigeon holed into juggling shit.

I have spent quite a bit of time going over what it might look like to either: adjust the misc gem to that - or allow a user to specify the misc gem, and as of now have decided not to change that.

A.k.a. because we don't put something there
 
So unfortunately I have to come back to this:

So far my MQ2Cleric has cast Hazuri's Retort Rk. III 0 times over 6 hours, I've also toggled it off and back on, unmemmed, rememmed, also toggled on BYOS and toggled custom on and off.

Is there something I'm missing?

Thanks.

To add: I've also restarted the pc, disabled the plugin and made sure it was up to date.

Warrior tank, cleric is on assist.
 
RedQueen said:
So unfortunately I have to come back to this:

So far my MQ2Cleric has cast Hazuri's Retort Rk. III 0 times over 6 hours, I've also toggled it off and back on, unmemmed, rememmed, also toggled on BYOS and toggled custom on and off.

Is there something I'm missing?

Thanks.

To add: I've also restarted the pc, disabled the plugin and made sure it was up to date.

Warrior tank, cleric is on assist.
Click to expand...
You need the ma to be local PC (on cwtnbuffs so we can check blocked buffs), not blocked, cleric must have mobs showing up on xtarget window.

If you didn't patch then you really should (you said you did), because I made an update for you that would make it not work if usemelee was on.

Toggling back and forth, unloading and reloading, byos on and off - those don't do anything other than change the values that they change. You're not "shaking anything loose".

You need useretort on to use retort, regardless of byos status.

Useretort on
Group main assist assigned
Group main assist local PC on same MQ install
Group main assist not having it blocked spell
Cleric xtarget is populated with "autohater" npcs
Cleric xtarget not completely full of player characters
 
Sic said:
You need the ma to be local PC (on cwtnbuffs so we can check blocked buffs), not blocked, cleric must have mobs showing up on xtarget window.

If you didn't patch then you really should (you said you did), because I made an update for you that would make it not work if usemelee was on.

Toggling back and forth, unloading and reloading, byos on and off - those don't do anything other than change the values that they change. You're not "shaking anything loose".

You need useretort on to use retort, regardless of byos status.

Useretort on
Group main assist assigned
Group main assist local PC on same MQ install
Group main assist not having it blocked spell
Cleric xtarget is populated with "autohater" npcs
Cleric xtarget not completely full of player characters
Click to expand...
Oh! Interesting @ same PC.

Damn, I had absolutely no idea that was a requirement. (I read back a bit but... Either I missed it or I didnt go back far enough).

I typically play with my main tank on my main PC then all my other toons sit on my SecondPC next to me.

I'll give that a shot. Figures, one thing I didn't really consider lol.

Thank you, Sic!
 
For some reason my cleric is locked into a sit stand routine when everyone is medding.

I have tried switching everything off and on but only pausing will let the cleric med.

Any suggestions, I did try to read most of the thread but if its there I missed it.
 
Terche said:
For some reason my cleric is locked into a sit stand routine when everyone is medding.

I have tried switching everything off and on but only pausing will let the cleric med.

Any suggestions, I did try to read most of the thread but if its there I missed it.
Click to expand...
Usually the plugin will give you an indicator of what it's trying to do. Anything in the plugin output to suggest the reason?
Also, please make sure you're not running any conflicting automation such as macros or Lua.
I believe you need to stand to forage for example, and it could be trying to forage?
 
Really minor tweak suggestion here. I have noticed that when rezzing after a wipe, MQ2Cleric will cast Divine Intervention on the tank first, immediately followed by a rez. Since the DI cooldown is long, the next few get revived without a DI first, but if DI and revive are both available it prioritizes DI first. Not a big problem, but at the lower levels eating the extra 2 emeralds is noticeable.

Maybe there is a reason for this in the midst of battle, but it does this in GL and safe zones also.
 
vandersl said:
Maybe there is a reason for this in the midst of battle, but it does this in GL and safe zones also.
Click to expand...
Thanks. I'll take a look. Appreciate it, and 💯%

so i thought i already handled this and the way thatwe handle it is to not do it in safezone if they have revival sickness, but i'll add a corpse check too (for safe zones)
 
Hello.
Now that my cleric has Holy intervention, it sometimes casts it on the tank while he is on his way back to camp. This leads to my cleric being summoned by the mob and dying away from camp while the others wait for the mob to arrive to camp.
How do I stop this from happening?

phayati said:
Hello.
Now that my cleric has Holy intervention, it sometimes casts it on the tank while he is on his way back to camp. This leads to my cleric being summoned by the mob and dying away from camp while the others wait for the mob to arrive to camp.
How do I stop this from happening?
Click to expand...
nvm I just noticed that there is a setting for it. I just got the spell so I had no idea what that setting was for. It was at 99. now I put it at 50 and I am assuming this will solve the issue.
 
phayati said:
Hello.
Now that my cleric has Holy intervention, it sometimes casts it on the tank while he is on his way back to camp. This leads to my cleric being summoned by the mob and dying away from camp while the others wait for the mob to arrive to camp.
How do I stop this from happening?


nvm I just noticed that there is a setting for it. I just got the spell so I had no idea what that setting was for. It was at 99. now I put it at 50 and I am assuming this will solve the issue.
Click to expand...
Should consider huntertank on your tank and chasemode on everyone else.

It is much more efficient than running to a mob and then running all the way back

You could also use battle mode on the cleric and we'd use contraventions instead of interventions
 
For some reason If I have Gallantry and Hand of Gallantry memed with BYOSCUSTOM on I cleric keep casting single then hand over and over. Not sure why this is. Once I pause it and unmem the single verison he stops.
 
98bcobra said:
For some reason If I have Gallantry and Hand of Gallantry memed with BYOSCUSTOM on I cleric keep casting single then hand over and over. Not sure why this is. Once I pause it and unmem the single verison he stops.
Click to expand...
yep, it would - if eq/mq says they dont conflict and you're missing them both, they would. I'm not sure why you would memorize them both - don't :p
 
Sic said:
I'm not sure why you would memorize them both - don't :p
Click to expand...
I do sometimes. I use them both on raids. Single for spot buffing those poor souls then refuse to stay on their feet, and group when more than one needs buffed. Really depends on how quick I need to get back to healing and mana...
 
GKD1231 said:
I do sometimes. I use them both on raids. Single for spot buffing those poor souls then refuse to stay on their feet, and group when more than one needs buffed. Really depends on how quick I need to get back to healing and mana...
Click to expand...
you can just do a /buffthem name <spellname/alias/groupname> or they can /tell <yourcleric> buffme <spellname/alias/groupname> and then you dont even have to do the clicking or anything - mq2buffme gonna be awesome for you here - no byos/byos-custom needed
 
Yea how it happened was I have group up. My buffme is the single target and I was wondering why the mana was so low. He just was just casting it over and over Single then group then Single. I just change my buffme,
 
Sic said:
either they can be in your raid, or on your xtarget (with xtargethealing on)
Click to expand...

Ok thanks. I was hoping there was a way to rez someone outside of the group, not in a raid but in my guild. Apparently that is not possible unless I put the entire guild on my XTarget which wouldn't be practical.
 
Jetanroth said:
Ok thanks. I was hoping there was a way to rez someone outside of the group, not in a raid but in my guild. Apparently that is not possible unless I put the entire guild on my XTarget which wouldn't be practical.
Click to expand...
nope just in raid or on xtarget

You could always make a lem/event/whatever that someone comes near you with a corpse or sends you a message that your cleric /xtarget set 9 <player_name> and it would add the person to that slot on xtarget and rez them
 
I've only seen the weird, low-level stacking clashes across multiple different classes not the same so if this is normal then nm me, but yesterday my low level cleric was so excited that she got single shot Temperance that she started trying to overwrite the Hand of Temperance her group already had from my 120 cleric. To her credit it worked and she stopped once everyone had her version, but seemed odd.
 
knave23 said:
I've only seen the weird, low-level stacking clashes across multiple different classes not the same so if this is normal then nm me, but yesterday my low level cleric was so excited that she got single shot Temperance that she started trying to overwrite the Hand of Temperance her group already had from my 120 cleric. To her credit it worked and she stopped once everyone had her version, but seemed odd.
Click to expand...
well it says "does this buff stack and/or overwrite and are they missing it" so as expected.
 
I am trying to use the Spectral Horse Saddle.
In manual mode it spams casting the saddle over and over (Using Item Spectral Horse Saddle), I have typed the command /cleric AutoDismount off with no success.
There is no Red warnings from EQ or MQ about an error. I removed all buffs to avoid a stacking issue. It is listed in the addclicky in the Downtime.
When i pause the item works.
 
Thats too funny. I did do the /clr AutoDismount off, with the caps as in the instructions, did not work.
Did it with out the caps, seems to have fixed it..
Thank you...
 
You must log in or register to reply here.
Plugin - MQ2Cleric
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -