it does already
/clr userez on if you want to do rezzing type stuff/clr usedivinerez on if you want to use divine rez aa/clr useepicrez on if you want to use epic 1.0 to rez/clr userezstick on if you want to use the rez stick to rez
-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter ChatWithThisName
- Start date
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,723
You can add people to XTarget, and it can rez them that way, Needs XTargetHealing turned on. Some fore thought is needed for this, as you'll have to know you should watch them.
if you want to manually do something, you will likely want to pause the plugin.
otherwise if you want to xtarget rez - you will want to add that person, while living, to xtarget, and turn on xtarget healing
Hi folks, quick question:
Brand new group of 6 characters. All level 1. All using CWTN plugins. While I was setting up in Crescent Reach and getting used to the buttons and commands, a nice high level character came along and buffed all 6 of my characters.
Now the Cleric is continuing to cast Courage on the Main, which is not landing because there is a higher level spell of the same line on it (that is my best guess). Therefore the program is not seeing the buff land/load and is recasting it. The Cleric is doing nothing but cast Courage. Minor issue which I'm sure I can deal with, but thought I'd report it if there is some sort of logic about that situation that I need to turn off/on to make it stop? Should I just cancel the higher level buff on me?
Brand new group of 6 characters. All level 1. All using CWTN plugins. While I was setting up in Crescent Reach and getting used to the buttons and commands, a nice high level character came along and buffed all 6 of my characters.
Now the Cleric is continuing to cast Courage on the Main, which is not landing because there is a higher level spell of the same line on it (that is my best guess). Therefore the program is not seeing the buff land/load and is recasting it. The Cleric is doing nothing but cast Courage. Minor issue which I'm sure I can deal with, but thought I'd report it if there is some sort of logic about that situation that I need to turn off/on to make it stop? Should I just cancel the higher level buff on me?
howdy jyn, thanks for moving the conversation to the cleric thread.
i did already answer you, however.
you'll want to determine what/why those things are happening.
in the case of yaulp if you have useyaulp on, and you don't have the buff from it we're going to cast it (during combat), - you don't get mana regen from it until 56 (at which point if useyaulp is on we'd cast it like a buff), but you have useyaulp so you're gonna use it when you're in combat
I would start > here < in each of the plugins there is an overview/commands/FAQ tab, with information about various things, including if you run into any mq/eq discrepancies with buff stacking.
> MQ2Cleric FAQ <
Q. Cleric is chain casting something?
A. There are a few lower lvl / mid level buffs that eq/mq2 reports stack that do not, or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast.
EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)
Q. I don't want the plugin to cast xyz buff on a toon.
A. Any buff you don't want cast upon someone, you would just have that character add it to their blocked buffs.
EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)
I suspect that the high lvl buffs are causing interaction issues with the way MQ determines how buffs stack or how they don't.
you'll want to dermine what that is by the red error text as explained in the FAQ i linked and pasted above, and then make the adjsutments/corrections as needed.
if you just want to temporarily stop buffing entirely you can just
/clr byos on and then unmemorize the courage buff (keep in mind turning on byos does not memorize any spells).There is a lot of information and things to know/learn - but nearly all of should be in the resources themselves that you can reference for quick information - FAQ, commands tab, the video overview, etc. as well as my guides on movement socials and the like.
I would start > here < in each of the plugins there is an overview/commands/FAQ tab, with information about various things, including if you run into any mq/eq discrepancies with buff stacking.
I added some more information to my response, double-check it plz
Trying to get cleric to use Unified Credence, He still using Hands of Reliance instead. Only thing I can figure is group vs. single is why he's not using? I just started farming the Cantrips so it's the only 91-95 spell I have right now.
the unified hand of certitude is the group aegolism we use it, but it needs to be higher lvl than your single aego. is your single aego currently higher?
well we use your group aego if it is higher lvl or equal to your single version
Not even close to being equal...
Hand of reliance RKII vs.
1: Stacking: Block new spell if slot 3 is effect 'Max Hitpoints' and < 5957
2: Increase Max Hitpoints by 4957
3: Increase HP when cast by 4957
4: Increase AC by 228
5: Stacking2 v1 69: 5957
Credence RKII (via Unified Credence RkII)
1: Stacking: Block new spell if slot 3 is effect 'Max Hitpoints' and < 7524
2: Increase Max Hitpoints by 6524
3: Increase HP when cast by 6524
4: Increase AC by 314
5: Stacking2 v1 69: 7524
Guess I sucking it up and going to buy the non-RK, at least for this one for now...
well the point here is it appears mq2cleric is missing "Unified Credence", which is what we would use if it was higher than your group aego.
but i was following your question about the group aego version
added, will be in next update
thanks, i accidentally fat-fingered some beta stuff, (which subsequently bumped some other stuff) you can ignore =p
yup, same thing we spoke about a few days about about target type group_v1.
Afternoon Sic and CWTN. I have a problem with MQ2Cleric. I am using MQNext. This is whats going on. My cleric is level 30. It keeps trying to load the spell Divine Aura in spell slot 8. The spell takes 15 mins to become active. It lasts for 18 seconds when used. The problem is that any buffs will stop the spell from becoming active and will try to redo the spell.
I have tried to use BYOS but when I load a spell in gem slot 8 I will cancel the spell and try to put back Divine Aura.
The cleric also tries to load up this as well.
This is a lower level spell then the one in gem slot 1. So the cleric keep trying to do these spells and nothing is happening. Neither spell gets active befor the other one tries to load.
Can you guys take a look at it.
Zeb
I have tried to use BYOS but when I load a spell in gem slot 8 I will cancel the spell and try to put back Divine Aura.
The cleric also tries to load up this as well.
This is a lower level spell then the one in gem slot 1. So the cleric keep trying to do these spells and nothing is happening. Neither spell gets active befor the other one tries to load.
Can you guys take a look at it.
Zeb
Last edited by a moderator:
you can see by the window that it isn't us that is memorizing divine aura. you must be running a macro on top of this. maybe kissassist?
anything that we do we output that mq2cleric is doing it.
We also don't use divine aura nor do we manipulate spells while in byos =p
I figured it out sort of .... It goes back to the eq running in the taskmanager background processes. I found only one in there and that happened to be the one for the cleric. Once I ended the processe it started working like it was supposed to.... So now I need to figure out why it keeps having background processes running.
Zeb
Zeb
Well based on your pics, you were running a macro on top of the plugin memorizing things we don't use.
I don't think that has anything to do with background processes.
Running conflicting automation will absolutely result in what you are showing.
Mq2 cleric is like "that's weird we don't have this spell I want to use memorized, let's memorize it"
but then kiss or whatever is like "no memorize this" (which again is a spell that mq2cleric doesn't use)
mq2 window output (mq2cleric would put it in the cleric window, and would output like the above mq2cleric output
So, I've run into a scenario where MQ2 Cleric if set to mount via addclicky downtime, with useyaulp set to on, it will continually attempt to cast yaulp while mounted, even though it won't take hold.
The mount item is one of the ones from the DB store, "Consigned [Color] Silken Bridle"
Any possible fixes or workarounds?
The mount item is one of the ones from the DB store, "Consigned [Color] Silken Bridle"
Any possible fixes or workarounds?
can turn off useyaulp or turn on autodismount.
is this the yaulp spell and not the yaulp aa out of curiosity - if so i could see how this could happen, i'll update
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,750
Cleric Level - 70
Using MQNEXT
Started up a second group, got them high enough level to start integrating into my main group for faster exp gains. My cleric is constantly spamming Conviction on the lower level toons that can't receive it. I thought this was a minor annoyance until I realized it's taking up 1% of her mana pool every time she attempts to cast and fails. I don't remember this ever being a thing, I thought the buffs had level checking in mind and wouldn't cast on someone that isn't the proper level. The character she is attemping to cast this on is currently level 60 but I first started noticing it last night around like 52.
Using MQNEXT
Started up a second group, got them high enough level to start integrating into my main group for faster exp gains. My cleric is constantly spamming Conviction on the lower level toons that can't receive it. I thought this was a minor annoyance until I realized it's taking up 1% of her mana pool every time she attempts to cast and fails. I don't remember this ever being a thing, I thought the buffs had level checking in mind and wouldn't cast on someone that isn't the proper level. The character she is attemping to cast this on is currently level 60 but I first started noticing it last night around like 52.
block this on the lower toon you don't want to receive it on until they're in range.
> MQ2Cleric FAQ <
- Joined
- May 6, 2017
- RedCents
- 310¢
hey so i love all of your plugins i use 5 of them (no bard yet) LOL but my question is, is there a way to save my settings in the UI so i do not have to click off cleric melee etc every time i load the plugin up? i didn't see a command listed and it is kind of a pain to reset the settings on 5 toons every time from pulling info , chase radius etc. thanks in advance!
first in the FAQ
Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10 <
- Joined
- May 6, 2017
- RedCents
- 310¢
also i know this is wrong discussion for it but even with my burns on every plugin turned to named only they are burning on trash mobs whenever the discs/aa's timer resets
- Joined
- May 6, 2017
- RedCents
- 310¢
thank you
sounds like you have your burn count not adjusted to whatever count you want
