• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Cleric

Plugin - MQ2Cleric (2 Viewers) 3.1.52471.11

The raid mode and the raid assist?


Raid Mode:
/clr RaidMode true/false/on/off/0/1 - Sets if you want to use the Raid Assist instead of the Main Assist for getting valid targets.
/clr RaidAssistNum 1-3 - Sets if you should use Raid Assist 1, 2, or 3 when in RaidMode

I'm mainly wanting one to heal the group and toss out heals to a few of the tanks on my ext. Just want to make sure I don't screw it up. Go the SK going great!!! Now gonna grab the cleric next.)
raid mode is just for assisting and such - if you want to heal targets on your xtarget, use xtarget healing.

Raidassist num is already on UI

1602570364788.png

Raid mode is already on UI
1602570378565.png

Xtargetbuffing (still need to be on cwtnbuffs file)
xtargethealing
1602570385246.png
 
Any possible way to add something to the rez logic say only attempt to rez a specific corpse twice ?
Maby log where that corpse is by its loc,so if it were moved would reset the count and attempt to rez again.
 
the plugin does use the aegis, I wouldn't add it to just automatically use it --- looking at the code, it appears there might be a mistake (would have to talk to chat, I haven't used the function, or looked at the code).


re: the melee thing - like the video i posted a day or two ago about the plugins/ui - everything is now use_blah including mq2cleric and specifically usemelee. the commands just need to be updated.

Is there a way to set when he will use is 2.0 and his Divine Arbitration AA?
 
Epic 2.0 is hard coded in, there isn't a way to set the value. Should be done automatically as an "oh shit" type situation if the MA's health drops below 50% and the epic is ready.
Divine Arbitration is the same, an OhShit heal hard coded in to be used if the MA's health falls below 50% and the AA is ready.
 
I manually clicked Quiet Prayer on Bard and he got the boost but I will double check.
def need to recheck that. My main is a bard and paragon/QM have no effect on my mana. my own solo ability does, but nothing else
 
You should set a way to disable using it and any other cures because some debuffs actually hurt you if you cure them and epic will cure you.
I'm assuming your quote was for epic and not for the bard comment.

next update the 1.5/2.0 will check against your UseCures option. so if usecures is off, you won't use the 1.5/2.0

which is good timing because we have some changes to various things to do with usecures next update - and also including a addclicky cures
 
Epic 2.0 is hard coded in, there isn't a way to set the value. Should be done automatically as an "oh shit" type situation if the MA's health drops below 50% and the epic is ready.
Divine Arbitration is the same, an OhShit heal hard coded in to be used if the MA's health falls below 50% and the AA is ready.

So he will ONLY click based on the MAs HP? Not the rest of the group?
 
Yes. wouldn't want to balance HPs on your berzerker who's capped at 89% health and steal health from the tank who might not survive the balance. Would essentially be committing group suicide.
 
So he will ONLY click based on the MAs HP? Not the rest of the group?
Yes. wouldn't want to balance HPs on your berzerker who's capped at 89% health and steal health from the tank who might not survive the balance. Would essentially be committing group suicide.
Nah, it also uses it based on total group health being low, not just MA - the MA check is just one of the "uh oh shits going sideways" checks.

But it is not adjustable
 
Just watched your video @Sic on this. you had mentioned this was free on EMU and test servers.. is that still the case, if so does one grab it?
 
Just watched your video @Sic on this. you had mentioned this was free on EMU and test servers.. is that still the case, if so does one grab it?
it is automatically downloaded when you run the VeryVanilla updater for emu/test
 
Normally I would send a crash dump to eqmule, but since this one is directly in MQ2Cleric, I'm attaching it here. Let me know if there's a better way I should handle this.

View attachment 24994
what were the circumstances of this? it appears to be something when it went to buff a pet
were you doing a quest where you got a "pet" from the quest?
 
what were the circumstances of this? it appears to be something when it went to buff a pet
were you doing a quest where you got a "pet" from the quest?
I think i found a super weird situation that could be caused by a rogue bracket that under really specific circumstances could return an issue

only saw it by pure luck - but it is very likely this was your crash.

could you tell me about any pets in your group at the time? specifically if you were doing a one of the quests you get given a pet - like in chardok
 
I think i found a super weird situation that could be caused by a rogue bracket that under really specific circumstances could return an issue

only saw it by pure luck - but it is very likely this was your crash.

could you tell me about any pets in your group at the time? specifically if you were doing a one of the quests you get given a pet - like in chardok

Actually, just doing exp down there to level up everyone not 110. No questing (at least nothing specific to Chardok going on). Group consisted of 115 Enchanter (MA/puller) with pet and healer merc, 111 Mage with water pet (as tank), 110 Wizard, 108 SK with pet in Vorpal mode with Hates Attraction/Voice of Thule turned off, 108 Cleric in Manual mode with XTarget heals/buffs turned on. 105 Shaman is also present out of group with pet (on the Cleric's XTarget). At the time of the crash, I believe I'd just finished a pull.
 
Actually, just doing exp down there to level up everyone not 110. No questing (at least nothing specific to Chardok going on). Group consisted of 115 Enchanter (MA/puller) with pet and healer merc, 111 Mage with water pet (as tank), 110 Wizard, 108 SK with pet in Vorpal mode with Hates Attraction/Voice of Thule turned off, 108 Cleric in Manual mode with XTarget heals/buffs turned on. 105 Shaman is also present out of group with pet (on the Cleric's XTarget). At the time of the crash, I believe I'd just finished a pull.
thanks for the followup.

i did actually find 2 issues in our checks we were doing there - so its possible either of those was the issue - hopefully, these fix your issue (if not they do fix two issues nonetheless). They will be part of the very large update on the next live update wed 21st
 
thanks for the followup.

i did actually find 2 issues in our checks we were doing there - so its possible either of those was the issue - hopefully, these fix your issue (if not they do fix two issues nonetheless). They will be part of the very large update on the next live update wed 21st

Excellent. Thanks for taking a look.
 
I apologise in advance if this has been asked before but is there a way to get the clerics messages that are displayed in the MQ2 cleric window to the MQ2 window via DANNet or EQBC. Ie. i operate my tank but would like to see the clerics cast in my tanks mq2 window or eqbc window.

Thanks in advanced
 
I apologise in advance if this has been asked before but is there a way to get the clerics messages that are displayed in the MQ2 cleric window to the MQ2 window via DANNet or EQBC. Ie. i operate my tank but would like to see the clerics cast in my tanks mq2 window or eqbc window.

Thanks in advanced
no

you can close out the mq2cleric UI window and the messages will go locally in your mq2 window - but they do not broadcast via eqbc or dannet
 
No plans for it at this time. If there was i would have included that in my message. Doesn't mean no forever, but no plans atm.
 
Video FX in ISBoxer allows you to make a window for that. But it would be another window instead Adding to an existing one. I love my bard (sic bard KA 12 beta) broadcasting mezz and AA standing to my Warrior MQ window.
 
Redbot updated MQ2Cleric with a new update entry:

10/21/2020

- Can toggle off usage of epic 1.0 as "UseEpicRez".
- Updated for the overlap in lvl 52 Heroic Bond & lvl 52 Heroism.
- Lower Lvl Yaulp and Shielding Updates.
- Added Alliance (bout time, jeez)
- Cleric 1.5/2.0 now check against UseCures also, since they can cure.
-- This will make it so when you are doing an event you don't want to cure, and you /clr UseCures off
--- you won't use your epic 1.5/2.0 and accidentally kill everyone.
-...

Read the rest of this update entry...
 
Having a problem with my cleric spell locking every hour or 2 is there any suggestions for this or maybe a fix?
 
Having a problem with my cleric spell locking every hour or 2 is there any suggestions for this or maybe a fix?
i thought eq fixed their stupid stuck spell gems?

anyhow we have built in (and on by default) /clr checkforstuckgems on
 
I run a cl out of group and heal/buff off extended target.. Is there a way to get the cleric to cure extended targets also?
 
i thought eq fixed their stupid stuck spell gems?

anyhow we have built in (and on by default) /clr checkforstuckgems on
that option doesn't seem to work for me i've tried it in the past but ill try again and hopefully it works =) thank you for the response
 
What level must you be to use this? 115? I am only 109 would it work?
Thank you lilwizzie
 
Last edited:
It would work great at 109, I've used it from level 1 on and it just gets better as you get more abilities.
 
my Clr wont cast shielding on herself even though other spells that would block it are blocked.

/clr reload to save settings or just to reload from the ini file?
 
Plugin - MQ2Cleric

Users who are viewing this thread

  • E
Back
Top
Cart