well, it would just not try and cure that person who wasn't local, it will still fully function on everyone else as expected (including self) - but you are saying it is not curing at all
-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter ChatWithThisName
- Start date
ddonahue1979
Member
- Joined
- Jul 3, 2017
- RedCents
- 446¢
Ok, so I think I know where my confusion is now. I did run Velks but never got hit with restless ice so I can't confirm that, but when I went to ToFS to test on the 1st floor which is where I was having some problems, either ragged swipe or ragged slash from the drolvargs is causing issues. This may not be something that is curable, I'm just going to have to do some research on it, but if it is, it's definitely not curing that.
would need to see/hear specifically what isn't curing.
you had said nothing was getting cured - which didn't sound right.
There are tons of ToV effects that are not curable, with no counters, etc - some can be removed with the "can remove 1 detrimental", but without a damage type to remove
or like "Rake" from the RoS cats which is "Chromatic" damage or stomp from tizmaks is just "physical" dot with no counters to cure.
ddonahue1979
Member
- Joined
- Jul 3, 2017
- RedCents
- 446¢
Yeah Stomp was another one I tested in GD....the only other ones I was looking at was the Ragged Swipe or Ragged Slash from ToFS 1st floor from the Drolvargs. This may just be chalked up to me just not knowing exactly what is curable and what isn't, so I'll just have to research each as I come across them to see if they are actually removable or not. I do know that they didn't have counters, so I suspect they just aren't curable.
sounds like you turned off usecure.
Hi just wondering,
Could i request a feature such that under raid mode could there be a future option to integrate this with other clerics on the same computer? IE Complete Heal chain, or even just a heal chain. Something along the lines that cleric 1 in eqbc is casting some spell, cleric 2 will cast their spell Y seconds later, etc etc ?
Thanks,
Could i request a feature such that under raid mode could there be a future option to integrate this with other clerics on the same computer? IE Complete Heal chain, or even just a heal chain. Something along the lines that cleric 1 in eqbc is casting some spell, cleric 2 will cast their spell Y seconds later, etc etc ?
Thanks,
Howdy @ChosenOne
Sorry, but we have no plans on doing anything like that at this time
Lemons wrote a simple CH chain macro > HERE<
Last edited:
Hi Sic
Thank you for that clarification and really quick response. I have to say subperb service !
I did have another question regarding the cleric macro and it could be me, but i noticed that when i put the setting on Symbol line, it casts and buffs it on everyone in group, but it doesn't case the AC line of spells. I was wondering if i did anything wrong or setup anything wrong? Please note i'm on a TLP server and only level 60.
Thanks,
Thank you for that clarification and really quick response. I have to say subperb service !
I did have another question regarding the cleric macro and it could be me, but i noticed that when i put the setting on Symbol line, it casts and buffs it on everyone in group, but it doesn't case the AC line of spells. I was wondering if i did anything wrong or setup anything wrong? Please note i'm on a TLP server and only level 60.
Thanks,
dynglebarry
New member
- Joined
- May 30, 2020
- RedCents
- 23¢
So as problems go, this one is fairly first-world, but I have the mq2eskay, zerker, and cleric plugins. For some reason, after any update, I get a message that my mq2cleric is out of date with respect to yadda-yadda, and I have to re-download the cleric after every update. The others are fine. Is it something I need to change on my end?
sounds like your internet just didn't catch the update - not related to the resource specifically
just ensure you check your plugins tab after you update
Bonnono
Member
- Joined
- Jan 27, 2014
- RedCents
- 60¢
So my cleric is no longer doing HP buffs. She will cast the self buff but not aegolism on the group. MQ2CWTNBuffs is loaded, I have unloaded and reloaded it numerous times, BYOS is NOT on. The group is all on the same PC. I have tried numerous things such as deleting all the _buff.ini files. Deleting the mq2cleric.dll and associated ini's. I have now even gone as far as wiping out the entire Very Vanilla folder, reinstalling and changing nothing, then loading mq2cleric in game and she still will not cast any hp buffs.
No idea what the issue could possibly be.
No idea what the issue could possibly be.
PM me a snippet of
/clr showsettings (all of the stuff that it spits out - might need more than 1 screensnip)Take an easy screen snip with Shift+Windows Key+S, then select the area you wish to copy, then Control+V to paste it in the discord type bar.
@Bonnono
Thanks for your report - figured it was a TLP thing, and it was, lvl 60 has both single and group aegolisms, and we do a level comparison to check which one we should use and it was missing an "=". So it was checking to see if one was higher than the other but since they are the same level the code did what it was told, and did nothing.
tl;dr - broken, but will be fixed in tomorrow's update
Thanks for your report - figured it was a TLP thing, and it was, lvl 60 has both single and group aegolisms, and we do a level comparison to check which one we should use and it was missing an "=". So it was checking to see if one was higher than the other but since they are the same level the code did what it was told, and did nothing.
tl;dr - broken, but will be fixed in tomorrow's update
ah, well - what lvl are you?
based on your screensnip you are somewhere between 57 and 64, so I assumed you would be 60 (and on TLP) and when i checked the Aegolism/GroupAegolism i noticed at that lvl they are both lvl 60 (and the code issue)
perfect! sounds good - this should be all fixed up tomorrow. really appreciate the feedback and the responses!
Bonnono
Member
- Joined
- Jan 27, 2014
- RedCents
- 60¢
Not sure if this is nitpicky(probably is sorry), but is it possible to have the commands for the quickheal options match the UI window? I know them now, but the first few times I tried to change them I had to look up the correct command.
/clr MaQuickHeal # - Sets your MA Quick Heal threshold
/clr NonMaQuickHeal # - Sets your Non-MA Quick Heal threshold
Also the default is set to 99, not sure if that's intentional or not.
/clr MaQuickHeal # - Sets your MA Quick Heal threshold
/clr NonMaQuickHeal # - Sets your Non-MA Quick Heal threshold
Also the default is set to 99, not sure if that's intentional or not.
That might get changed sometime down the line - but not right now (for a couple of reasons). It is a known thing.
yes, the default is set for 99.
today was a patch day - so you need to patch your VV and your everquest
woot - back in action! get it
you have your mount set as a downtime clicky
Hi there,
Not sure if it this issue was captured or not, but since update on 16/09 and 20/09 , my 54 cleric is spamming Heroic Bond over and over again until OOM. I have MQ2CWTNBuffs loaded on all my toons so not sure if i'm missing anything else?
Thanks,
Not sure if it this issue was captured or not, but since update on 16/09 and 20/09 , my 54 cleric is spamming Heroic Bond over and over again until OOM. I have MQ2CWTNBuffs loaded on all my toons so not sure if i'm missing anything else?
Thanks,
Ohh i think i found the issue. My level 54 cleric had the spell Heroic Bond (group version of Heroism) scribed before the single target spell Heroism was memmed. This is what's causing the spam. The instant i memed the single target version the spam went away.
Good morning,
Two items, one a possible issue, another a request.
First, I got my epic last week, and noticed on raids the cleric would spam trying to rez when the corpse is out of range. This is on TLP at level 60. I don't know if this was happening before epic support was added, or if this was particular to a zone and line of sight issue or range of epic vs. spell. I wanted to mention in case anyone else noticed this behavior.
Second, the request. Can an announcement for rezzes be added with an option to specify the channel? I'd be happy with an ini entry, no need to further clutter up the UI.
Keep up the good work on these plugins!
Two items, one a possible issue, another a request.
First, I got my epic last week, and noticed on raids the cleric would spam trying to rez when the corpse is out of range. This is on TLP at level 60. I don't know if this was happening before epic support was added, or if this was particular to a zone and line of sight issue or range of epic vs. spell. I wanted to mention in case anyone else noticed this behavior.
Second, the request. Can an announcement for rezzes be added with an option to specify the channel? I'd be happy with an ini entry, no need to further clutter up the UI.
Keep up the good work on these plugins!
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #793
To the first bit. Did you have consent for the corpse?
To the second bit, no. Because if you happen to spam cast then you would spam announce. There is no plan to ever add logic to announce anything in any channel other than the class window or the MQ2 window.
To the second bit, no. Because if you happen to spam cast then you would spam announce. There is no plan to ever add logic to announce anything in any channel other than the class window or the MQ2 window.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #795
There's some assumptions made with the plugin. One of them being that you have consent. So when it does a /corpse it assumes the corpse got dragged and it will try to cast. So if you don't have consent, it's possible it's spamming it because it's trying to drag the corpse.
whatsaname
Active member
- Joined
- Sep 21, 2005
- RedCents
- 32¢
I'd like to see an option for Chase mode, to pick who to chase - this would be particularly useful on raids where the toon you want to follow might not be MA, or you dont want group MA set.
The other thing would be a toggle that disables MA/MT settings so they can be manually adjusted
The tank plugins always set these, and in some circumstances i dont wont those toons set
(I know i can change ldr and adjust - but my tanks is main and i like having ldr on tank)
The other thing would be a toggle that disables MA/MT settings so they can be manually adjusted
The tank plugins always set these, and in some circumstances i dont wont those toons set
(I know i can change ldr and adjust - but my tanks is main and i like having ldr on tank)
option to chose who to chase? - if you're in chase mode you're doing to chase your group MA or the Raid MA if you're in raidmode - no plans on changing that --- you could always be in mode 0 or mode 3 and afollow someone if you wanted to
disable auto assigning yourself as main tank in group window - this makes sense. originally before we changed how we check for if you are "tanking" we would only use the group assignment, so if you were leader and you were in a tank mode, we assigned you as group main tank - makes sense to have this as an option to auto assign you or remove it all together. chat and i will look into this
Morning! Love the cleric plugin. Great job on it.
- Both my clerics are no longer Yaulping as of latest download of plugin.
- "Force Alliance" does nada with one cleric in group. Won't even mem spell. (double checked that I had it scribed) .. CLR alliance is powerful even without 3x CLR in group, especially if you have a second healer in group! ( i have a shm)
- Might be intended, but Cleric alliance spell is not populating "/clr missing" if the cleric didn't buy / scribe it.
Thanks for the brilliant plugin
- Both my clerics are no longer Yaulping as of latest download of plugin.
- "Force Alliance" does nada with one cleric in group. Won't even mem spell. (double checked that I had it scribed) .. CLR alliance is powerful even without 3x CLR in group, especially if you have a second healer in group! ( i have a shm)
- Might be intended, but Cleric alliance spell is not populating "/clr missing" if the cleric didn't buy / scribe it.
Thanks for the brilliant plugin
Many_Whelps
WoW was the first MMO
- Joined
- Jul 22, 2018
- RedCents
- 762¢
I noticed it not using alliance as well. I run this for raids, so there are plenty of healers around to trigger alliance on the MT, but they're live players so no communication via Dnet/eqbc/cwtnbuffs.
the alliance/force alliance are "common" buttons so everyone has it regardless of if they have alliance logic or not.
cleric, atm, doesn't have alliance logic (including missing spells) for several reasons (it will in the future). I have a few folks testing the implementation with mq2shaman.
main and biggest issue is no cwtnbuffs for non-local toons - so as it is now, no real way to toss it on them, but i came up with a way that works.
will likely see it moved back to cleric soon :tm:
re: yaulp - there has been no changes in mq2cleric about yaulp what/when/how/why etc.
