• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
KissAssist

KissAssist Release KissAssist 12.002.039

No permission to download
Anyone know what I'm doing wrong here?

1638547096297.png

Buffs10=Group Pact of the Wolf Form|remove
Buffs11=Overflowing Urn of Life
Buffs12=Violet Conch of the Tempest|dual|Spinecoat
Buffs13=Huntsman's Ethereal Quiver|summon|Ethereal Arrow|200
Buffs14=command:/alt buy 5104|Cond20
Buffs15=Shining Aegis|begfor|1|alias|Symbol
Buffs16=Ice Bound Ulthork|Dual|Familiar: Ice Bound Ulthork
Buffs17=Summon Familiar: IceBound Ulthork|Remove
 
Buffs15=Shining Aegis|begfor|1|alias|Symbol

I've never used the feature to beg for buffs, however, for Shining Aegis you really want to monitor the Shining Defense component because it usually fades faster than the Shining Aegis component.

On your begger you might want to try Buffs15=Shining Defense|begfor|1|alias|altbuff1

then on your cleric you would use Buffs??=Shining Aegis|alias|altbuff1

or possibly you'd have to use Buffs??=Shining Aegis|dual|Shining Defense|alias|altbuff1

Anyway, I didn't verify this but this seems to be the format the instructions would lead you to be trying.
 
What revision of KA are you running. There were some changes made to the ScanIni routine a while back. I did miss skipping the begfor entries, but the "remove" entries should be being skipped.
 
@ctaylor22 I was using ka_12001, but just realized we were on a later version so I just switched and I’m trying to straighten out my ini
 
@B_I_G__D_A_D_D_Y thanks for pointing that out. I think there was a reason why I had that there but I’ll need to go back and experiment.
 
@Ordell Yes the macro traps for a message, the question is what message are you getting that determines that the mobs are immune to the mez spell?
 
Is anyone having issues with their CURE section not working?
I'm still very new to this community, but I have not been able to get any Cures functioning properly on any of my healers. I've gone through all of the old forums posts I can find here and at best I can get my healer to just spam a Cure, and at worst they just ignore the debuffs entirely.

I've tried using

Cures1=Eradicate Poison|Poison
Cures1=Eradicate Poison

I've even tried setting up conditions using ${Me.Poisoned} but didn't get very far with that. (Eradicate Disease tested as well)

All of my characters are connected to EQBC as well. I'd love to try any other .ini with working cures if someone has one
 
Question: do you have the cure spell in one of the spell gem slots or are you trying to cure it out of combat while the group is resting?

Zeb
 
Hey Guys -- Thanks for the feedback. I will give DanNet instead of EQBC a try when I get on tonight.

@Zebadiah -- I did ensure that my Priests all had their Cures memorized and had tried all sorts of different logic/cure spells and just couldn't get them to fire when needed. (Either curing nonstop on MA/Last Healed group member, or never using them at all) Also tried tests using KA directly as well as running all the characters (Same .ini files) through MuleAssist. I don't know if that is even really testing anything, just another step I have tried so far.

I had planned to organize my troubleshooting into an actual post at some point this weekend if I still didn't have a solution.
I'll give DanNet a whirl and let you guys know what I find!

@deathlock -- You still having issues with your Cures?
 
Jowston, I have to ask are you using KA or CWTN and have you moved to MQNext or are you still on Live?

If you are using KA,
CuresOn00/1/2/30=Off/1=On - For self and others/2=On - Cure self only. - For curing of debuffs./3=On - Cure Self and Group Members Only.
Have you tried setting the CuresOn=3 for cure self and group?

Note from KA Wiki: Be aware you need to have your cure spells memmed if your using spells, kiss won't mem a cure to cast it.

If you are using a different macro then KA you will have to go to the discussion for those macro's and see what they say (like RGMercs or Mule)

Zeb
 
Appreciate the replies Zeb

After making the suggested changes -- switching to DanNet for my profiles and toggling to CuresOn=3 seems to have cleared up the issue and has my shaman clearing those debuffs almost instantly now
 
Using the latest version of Kissassist. First thing I notice is my bard trying to mez a single mob while the group is attacking it. Second, my rogue in the group is leaving a corpse like 200-300 feet away from the camp. Not sure how or why he even ends up there, but when I revert back to my last version, it stops.
 
What is your bards MezRadius? What is your rogues MeleeDistance?
Melee distance was 75, changed it to 45 and it seems to have helped. Mez radius is 70 on the bard, not sure why he would be trying to mez the mob the group is beating on and no other mobs on the xtarget. Doesn't do this with another version I roll back too. I haven't messed with my ini files since the first version of
v12.001 (I use a slightly pet section modified version).


EDIT: Mez radius or meleedistance still having the same issue. Even tried recreating the ini files.
 
Last edited:
Far as the rogue, i turned off kiss and just left him in the group on sneak and hide, low and behold he ends up in the same spot that he has died at previous, but still there in sneak and hide. Apparently the mob is summoning him to the spot, strange part is that he is the only one in the group getting summoned.
 
Why would he be summoned if he is in sneak and hide mode? That sounds a bit perplexing.
Yah, it is. That is why I had such a hard time trying to figure it out. Still not even sure he is getting summoned, but he is about 200 ft away from camp in the same spot. My only other explanation is getting knocked back, maybe the other toons are returning to camp when getting knocked out of camp. Maybe a moveto or come to me command getting passed for some unknown reason via dannet to my rogue. Not really sure. lol

The bard is all good now, just get an error message here and there about not having a valid target for /face after mezzing a mob.
 
Last edited:
Hmmm. that makes since, do you have ReturnToCamp turned on for your rogue? What is his CampRadius and MeleeDistance?
I haven't updated my ini for the new expansion yet, but I have the same ini for all three rogues, only one that is in the group is doing this. With or without any macros running on the rogue that is in the group. I don't have it hard in the ini but I do issue the command /camphere on with all my toons.

[CODE title="Rogue Ini"][General]
KissAssistVer=12.002
Role=Assist
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=10
MedCombat=0
LootOn=0
RezAcceptOn=1|96
AcceptInvitesOn=1
GroupWatchOn=0
EQBCOn=0
IRCOn=0
HoTTOn=0
CampfireOn=0
CharInfo=Rogue|120|GOLD
DefaultUI=TRUE
DPSMeter=1
ScatterOn=0
XTSlot=0
GroupWatchCheck=FALSE
DanNetOn=1
DanNetDelay=20
MedStop=100
CorpseRecoveryOn=1
LOSBeforeCombat=0
[Buffs]
BuffsOn=1
BuffsCOn=0
BuffsSize=9
;Buffs1=Your Leg Clicky
Buffs1=Snowbound Shadowscale Leggings|Summon|Consigned Bite of the Shissar XX|20
;Buffs2=Your Poison
Buffs2=Consigned Bite of the Shissar XX
Buffs3=Thief's Eyes|ME
Buffs4=Lesson of the Devoted|Cond1
Buffs5=Drachnid Blade
Buffs6=Breather|end|20
Buffs7=Demagnifying Glass|Cond2
Buffs8=Relax|end|5
Buffs9=Composite Weapons
RebuffOn=1
CheckBuffsTimer=10
PowerSource=NULL
[Melee]
AssistAt=90
MeleeOn=1
FaceMobOn=1
MeleeDistance=45
StickHow=snaproll rear
AutoFireOn=0
UseMQ2Melee=1
AutoHide=1
TargetSwitchingOn=0
[GMail]
GMailHelp=Events currently support - Dead,GM,Level,Named,Leftgroup
GMailOn=0
GMailSize=1
GMail1=NULL
[AE]
AEOn=0
AESize=1
AERadius=50
AE1=NULL
[DPS]
DPSOn=1
DPSSize=26
DPSSkip=0
DPSInterval=0
DPS1=Lethal Aim Discipline|99
DPS2=Banestrike|99
DPS3=Ligament Slice|97
DPS4=Twisted Shank|99
DPS5=Rogue's Fury|99
DPS6=Focused Rake's Rampage|99
DPS7=Daggerslash|100|ambush
DPS8=Undetectable Discipline|99
DPS9=Slash|99
DPS10=Executioner Discipline|99
DPS11=Pinpoint Defects|99
DPS12=Naive Mark|99
DPS13=Jugular Cut|99
DPS14=Chelicerae Discipline|99
DPS15=Blitzstrike|99
DPS16=Cloaked Blade|99
DPS17=Frenzied Stabbing Discipline|99
DPS18=Bushwhack|99
DPS19=Diversion|99
DPS20=Cozen|99
DPS21=Spire of the Rake|99
DPS22=Powerful Dagger-Throw|99
DPS23=Binding Glint|99
DPS24=Practiced Reflexes|99
DPS25=Poisonous Coalition|99
DPS26=Vindictive Puncture|99
DebuffAllOn=0
[Aggro]
AggroOn=1
AggroSize=4
Aggro1=Bold Escape|80|>
Aggro2=Smokeveil|70|>
Aggro3=Tumble|50|>
Aggro4=Agile-Footed Discipline|40|>
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=1
HealsSize=1
Heals1=Assassin's Premonition|50
XTarHeal=0
HealGroupPetsOn=0
AutoRezOn=0
AutoRezWith=Your Rez Item/AA/Spell
XTarHealList=NULL
RezMeLast=0
HealInterval=0
[Cures]
CuresOn=1
CuresSize=1
Cures1=Purge Poison
[Burn]
BurnSize=2
BurnText=Decepticons Attack
BurnAllNamed=1
Burn1=${InvSlot[Chest].Item.Name}
Burn2=Rogue's Fury
UseTribute=0
[Pull]
PullWith=Melee
PullMeleeStick=0
MaxRadius=350
MaxZRange=50
PullWait=5
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
PullLevel=0|0
UseWayPointZ=0
PullRadiusToUse=90
PullPause=30|2
PullArcWidth=0
PullOnReturn=0
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=1
AFKGMAction=4
AFKPCRadius=500
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=1
MercAssistAt=99
[KissError]
LastCMD:=/if (!37) {
ErrorDateTime:=12/13/2021 18:31:02
ErrorMsg:=Could not find valid target for /face
DataError:=NULL
SyntaxError:=NULL
RunningTime:=213479125
BuildDate:=20211207
CurrentUI:=Default
[KConditions]
ConOn=1
CondSize=2
Cond1=${SpawnCount[pc class warrior group]}==1
Cond2=(${Me.Height}>1.91)
[PullAdvanced]
PullLocsOn=0[/CODE]
 
Set your ReturnToCamp=1 and set UseMQ2Melee=0. Just change ReturnToCamp first and see if that helps, if your still having the issue then turn off UseMQ2Melee.
 
Set your ReturnToCamp=1 and set UseMQ2Melee=0. Just change ReturnToCamp first and see if that helps, if your still having the issue then turn off UseMQ2Melee.
Still the same, just the strangest shit. The tank doesn't retrieve the corpse when running past it either. :(
 

Attachments

  • Untitled.png
    Untitled.png
    17.9 KB · Views: 4
I can't fathom any reason why even without running any macros on this toon and in sneak and hide mode, max aa that he would even end up in this spot 145 feet away from camp. Now I have to sit here and watch it for who knows how long to see it actually happen. :)
 
I updated eq and next. So I literally just watched my rogue run right up to the tank as he was pulling and get aggro with the emote your holdout blade falls away, takes a beating without even attacking and dies. lol
 
I think It might have something to do with leveling past 115, using a couple pet cast items, seems when the rotation pulls the mob with an arrow and then casts an item that sends a pet, the tank runs back to camp the pet dies and the mob summons a toon from the group. Did away with the pet cast items and see how it goes. haha
 
Ended up resorting to dragula.Lua on the main tank/puller to grab corpses. Started summoning my bard after the rogue would die.
 
Nothing changed other than running dragula and my puller just stopped at pull spot, try to run him around and he snaps back to pull spot. Stop the dragula script and restarted kissassist and same thing. wtf is going on. never had issues like this before.
 
Hello everyone!

Is there anyway to get all of my group members to sit when someone in group calls out they are OOM and needs to med?

I usually use my bard to pull but when he sits at like 2% and does his group call to med. He sits but everyone else still is standing. Some need to med and some do not.

please let me know! Thanks
 
If the MA sits down the rest of the group will sit, if they are not at 100%.

Do you have groupwatch turned on, on the character that is pulling?
 
Why are my toons buffing people not in my group, this looks like very odd behavior. Specially considering I don't know any of them.

KissAssistVer=12.002

Code:
[Buffs]
BuffsOn=1
RebuffOn=7

BuffsSize=7
CheckBuffsTimer=10

PowerSource=NULL

# Group Common Buffs
Buffs1=Personal Hemic Source|dual|Familiar: Personal Hemic Source
Buffs2=Golden OwlBear Saddle|Cond7
Buffs3=${InvSlot[Charm].Item.Name}|99|Me|Cond16
Buffs4=Guise of the Deceiver|Cond6

# Class Buffs
Buffs5=Aura of Margidor|Aura
Buffs6=Rapier of Somber Notes|dual|Symphony of Battle|Cond1
Buffs7=Selo's Sonata|dual|Selo's Accelerato|MA



## ------ Buffs ------ ##
Cond1=TRUE
Cond6=!${Me.Invis} && !${Me.Buff[${Spell[Illusion: Dark Elf].RankName}].ID} && !${Me.Buff[${Spell[Illusion Benefit Greater Jann].RankName}].ID}
Cond7=!${Me.Buff[Mount Blessing Meda].ID} && !${Zone.Indoor}
Cond16=!${Me.Invis} && !${Me.Buff[${Me.Inventory[Charm].Spell}].ID}
 
This is working well for the most part on my wiz. I had an issue today where we arrive at the camp, set up, and I start pulling. Wave after wave of mobs and the wizard is not fighting. So I dig into the .ini files and find nothing suspect. Then I reconfigure the tank settings. Nothing. Restart all plugins and macros. Nothing. 45 minutes later I look and notice he is STILL INVISIBLE FROM THE RUN OVER. This is why I had to wear a helmet in school.
 
KissAssist Release KissAssist

Users who are viewing this thread

Back
Top
Cart