Problem - You can't pull with MQ2Advpath and Melee

[manna3i]

I am trying to run a new character to run around kill things using Hunter role, but I get this error "You can't pull with MQ2Advpath and Melee" even though I unloaded the Mq2AdvPath plugin.

[General]
KissAssistVer=9.1.3
Role=PullerTank
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedCombat=0
LootOn=0
RezAcceptOn=0
AcceptInvitesOn=1
GroupWatchOn=0
CastingInterruptOn=0
EQBCOn=0
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0
[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist
[Buffs]
BuffsOn=0
Buffs1=NULL
Buffs2=NULL
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
CheckBuffsTimer=10
PowerSource=NULL
[Melee]
AssistAt=100
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll rear
AutoFireOn=0
UseMQ2Melee=1
[GoM]
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSpell1=NULL
GoMSpell2=NULL
GoMSpell3=NULL
[GMail]
GMailHelp=Events currently support - Dead,GM,Level,Named,Leftgroup
GMailOn=0
GMail1=NULL
GMail2=NULL
GMail3=NULL
GMail4=NULL
GMail5=NULL
[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
AE6=NULL
AE7=NULL
AE8=NULL
AE9=NULL
AE10=NULL
[DPS]
DPSOn=0
DPSSkip=20
DPSInterval=2
DPS1=NULL
DPS2=NULL
DPS3=NULL
DPS4=NULL
DPS5=NULL
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
DPS16=NULL
DPS17=NULL
DPS18=NULL
DPS19=NULL
DPS20=NULL
DebuffAllOn=0
[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
Aggro4=NULL
Aggro5=NULL
Aggro6=NULL
Aggro7=NULL
Aggro8=NULL
Aggro9=NULL
Aggro10=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
Heals6=NULL
Heals7=NULL
Heals8=NULL
Heals9=NULL
Heals10=NULL
Heals11=NULL
Heals12=NULL
Heals13=NULL
Heals14=NULL
Heals15=NULL
XTarHeal=0
XTarHeal2=0
AutoRezOn=0
AutoRezWith=Your Rez Item/AA/Spell
HealGroupPetsOn=0
[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL
Cures4=NULL
Cures5=NULL
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
UseTribute=0
[Pull]
PullWith=Melee
MaxRadius=350
MaxZRange=50
PullWait=5
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2
PullLevel=0|0
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92

 

[Maskoi]

are you starting kiss wit [path in the command line?

/mac kissassist path pok

 

[manna3i]

No, I am sitting in blightfire moors and /mac kissassist hunter

 

[ctaylor22]

I think I ran into this error once before. The fix will make no since to most who code in MQ2, but here is the fix:

Around line 5044 you will find the following code:

		/if (${PullWith.Equal[Melee]}) {
			/if (${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}) {
				/beep
				/beep
				/beep
				/popup You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/if (${DebugPull}) /echo ${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}
				/echo You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/endmac
			} else /call PullVars 15 Melee 15
		}

Change it to this:

		/if (${PullWith.Equal[Melee]}) {
			/if (${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}) {
				/beep
				/beep
				/beep
				/popup You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/if (${DebugPull}) /echo ${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}
				/echo You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/endmac
			} else {
                               /call PullVars 15 Melee 15
                        }
		}

Only the highlighted lines need to be changed.

 

[manna3i]

I found the line when I was trying to check my kiss.ini when I was having this issue, didn't figure that a bracket might be missing.
Will check the solution once I am done with work and update. Thank you

- - - Updated - - -

I think I ran into this error once before. The fix will make no since to most who code in MQ2, but here is the fix:

Around line 5044 you will find the following code:

		/if (${PullWith.Equal[Melee]}) {
			/if (${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}) {
				/beep
				/beep
				/beep
				/popup You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/if (${DebugPull}) /echo ${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}
				/echo You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/endmac
			} else /call PullVars 15 Melee 15
		}

Change it to this:

		/if (${PullWith.Equal[Melee]}) {
			/if (${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}) {
				/beep
				/beep
				/beep
				/popup You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/if (${DebugPull}) /echo ${PullPathWpCount} && ${PullMoveUse.Equal[advpath]}
				/echo You can't pull with MQ2Advpath and Melee. Please change PullWith to a Spell/AA/Disc/Ranged Weapon.
				/endmac
			} else {
                               /call PullVars 15 Melee 15
                        }
		}

Only the highlighted lines need to be changed.

This solution worked. Thank you!

 

[Maskoi]

Added to Kiss will be in next release