• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Question - wonder if its possible

AshLyNN

AshLyNN

Member
Joined
Mar 5, 2011
RedCents
67¢
Is their a way to set the bard up to run up to 2 mobs, cast lullaby of the forgotten Rk. II start to run back to camp hit faded memories, target mob that didn't get pulling and bring that mob back to camp for the tank to beat the crap out of?
I ask because I tried to pull the 2 mobs to camp and then use wave of quitetude or however it's spelled, I have mezon=1 and Bard won't mez


What is the eqbc command to click an otem in inventory

Also how do i get. Toons to click campfire thing aftrr death
 
Last edited:
Kiss = Kiss it simple stupid.

So no.

If your bard is not mezzing then your mez ini is incorrect. Post it your mez section so we cansee it and help you.
 
[Mez]
MezOn=1
MezRadius=75
MezMinLevel=50
MezMaxLevel=103
MezStopHPs=80
MezSpell=Slumber of Motlak Rk. II
MezAESpell=Wave of Quietude Rk. II|2

This is my mez section of Kiss as well i believe you have to have Twiston=1

I have no issues locking down 5+ mobs when i used to run the Into the hills HA.

Hope this helps
 
8 will have my wife post when she gets home.

And as far as the eqbc commands?

Or the command to click items from the eqbc mobile app?


Basically want to know if my toons are dead, if they are 1 toon take campfire back and be able to restart macro if needed from the mobile app

- - - Updated - - -

Warlock88 said:
[Mez]
MezOn=1
MezRadius=75
MezMinLevel=50
MezMaxLevel=103
MezStopHPs=80
MezSpell=Slumber of Motlak Rk. II
MezAESpell=Wave of Quietude Rk. II|2

This is my mez section of Kiss as well i believe you have to have Twiston=1


I have no issues locking down 5+ mobs when i used to run the Into the hills HA.

Hope this helps
Click to expand...

Ill have her check this, looks the same as ours just not sure twist is on, i think it is
 
ok so i checked the ini it is set just like above excatly except slumber spell is rank I only i think bard just sucks right now till more aa's lol

anyone know the other questions involving campfire and controling toons from eqbc mobile app? my campfireon=1 if that helps
 
id imagine the eqbc command for using clickies would mirror the in game command, sadly i cant remember the numering sequence for stuff in your bags correctly

so would be for example
Rich (BB code): 
/bca //useitem 17
should tell all toons connected to eqbc to click their breastplate.

from table below if you want to use a clicky in 1st slot of last bag it would be
Rich (BB code): 
/bct toonname //useitem 32 0



edit found this on soe forums
Rich (BB code): 
“usage: /useitem <slot> <subindex>
slot definitions:
Charm = 0
Left Ear = 1
Head = 2
Face = 3
Right Ear = 4
Neck = 5
Shoulders = 6
Arms = 7
Back = 8
Left Wrist = 9
Right Wrist = 10
Range = 11
Hands = 12
Primary = 13
Secondary = 14
Left Ring = 15
Right Ring = 16
Chest = 17
Legs = 18
Feet = 19
Waist = 20
Power Source = 21
Ammo = 22
Bag Slot 1 = 23
Bag Slot 2 = 24
Bag Slot 3 = 25
Bag Slot 4 = 26
Bag Slot 5 = 27
Bag Slot 6 = 28
Bag Slot 7 = 29
Bag Slot 8 = 30
Bag Slot 9 = 31
Bag Slot 10 = 32
subindex: Only used if slot is a bag. Bag slot number starting at 0, left to right, top to bottom.”

- - - Updated - - -

ok i run a healer on seperate pc from an afk farm team so i have my healer set up as such, FIRST i run eqbc on the afk pc. youll need to find your IP address for this from the outside world.

hotkey 1
Rich (BB code): 
line1 /plugin mq2eqbc Line2 /bccmd connect (ip number here) line3 /autoaccept on
this loads eqbc
hotkey 2
Rich (BB code): 
Line1 /bca target group tank , line2 /bca //mac kissassist, line3/bct TANKSNAME //mac kissassist pullertank

this way if they wipe healar can campfire back rez everyone and then tell them all to restart Kissassist

so id assume if you were wanting to control healer from phone or a computer at work for eg. you'd use something like the following to get him to use the campfire assuming its in last bag first slot
Rich (BB code): 
/bct healername //useitem 32 0

- - - Updated - - -

this post reminded me id downloaded the android app for eqbc to my phone so thought id give it a try however ive hit a problem maybe someone can help with.
basicly how do i connect lol.

i have 3 computers with EQBC running on oneinternal ip addy is 192.168.1.200.2112, the other two are connected to it and ive checked external ip on whatsmyip.org, but i cant figure what ip address/port to enter into app.
 
I will check these commands thank you

i have 3 computers with EQBC running on oneinternal ip addy is 192.168.1.200.2112, the other two are connected to it and ive checked external ip on whatsmyip.org, but i cant figure what ip address/port to enter into app.
Click to expand...

I used the same ip that the eqbc exe is running on , i did not addd the 2112 at the end on the phone app
 
APP asks for the port so i put 2112 in.. when i removed it and just tried the ip add eqbc app crashed and now i cant get it working again lol.
 
scotsbiker said:
APP asks for the port so i put 2112 in.. when i removed it and just tried the ip add eqbc app crashed and now i cant get it working again lol.
Click to expand...

I had same problem un install re install make surr you don'tuse auto connect



I put ip. For server address
2112 under port

Also you have to use the ip from ip website. Not your. Local. Ip which is 192.168 one unless your device is useing home networkiinternet
 
thats what im doing got ip from whatsmyip , put that in and 2112 under port but still wont connect

am assuming i need to go into router setup and open the port or something but cant find anywhere on the router setup to do so.

for ino im on BTInfinity Broadband with their no3 router
 
Last edited:
What type router

Its probly under nat/gaming section. Port forwarding

- - - Updated - - -

Thier router or their modem?

- - - Updated - - -

If you want send me a private message with your phone number and ill call you, to walk you through it.
 
its the BT Home Hub 5 router


also am actualy running EQBC on two seperate computers, am assuming id need to change the port number on one of them?
 
I run 2 computer at home 1 i run eqbc on i use local ip to rin those then for my computer and phone i use the ip for computer running eqbc that shows up from website. Thrni can mmonitor. All toons sspread across 3 computers. From my phone and computers not in same state
 
all 3 computers are showing same ip from outside, so assuming thats actualy IP of router,

have eqbc running on one for autobones mac and then another instance of eqbc on third computer for afk farm team, with thier healer on 1st computer
 
Ig im not mistaken under another one of my posts someone repliedabout cchannels for what yourtal 'll ing about check eqbc guide, think thats where i posted
 
been reading thru that but cant realy find the answer i need, but am old forgetfull and half blind so thats no suprise lol
 
go to teamviewer.com and download to computer install as personal use, go to teamviewer.com on cell phone and it will take you to play store download team viewer to phone and sign up it is free.. search for where you can add computer click it..

then on your desktop open team viewer and should see your id and password go to phone and enter this info .. now you can see your game from cellphone
 
scotsbiker said:
thanks sorted it out yesterday, alth still cant figure how to connect with the EQBC app on mobile
Click to expand...

You don't connect to EQBC app on mobile.. every computer you are running a toon on that needs to connnect to EQBC must have it running... as long as your loading mq2eqbc plugin on toon.. and that computer is running EQBC.. the toon will autoconnect to server each login ... AFTER the first manual connection.
 
THD you can connect to EQBC via mobile app to monitor and control toons wjhile away from computer, i can connect via my home wifi just as i do with a computer, however it is capable of connect via the internet but i cant get that to work yet.

have 3 computers all connected to one instance of EQBC, my tablet also connected via wifi, but want to get my phone connected via external internet.

also want to run two instances of EQBC on one computer, followed the guide posted elsewhere here by placing a copy of EQBC and ini in a seperate folder and changing ini to listen to port 2113, however atm it still keeps listening on port 2112. gonna go re read the write up.
 
On tge ini file for the one. 2113 did you change port from 2112 to 2113.

Tty /bccmd forceconnect 123.456.7.88 2113
Replace with your ip
 
You must log in or register to reply here.
Question - wonder if its possible
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -