• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Cleric

Plugin - MQ2Cleric (1 Viewer) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (94) Reviews (33) History Discussion Terms and conditions
Sheesh I thought I had this set up. Anyways got a couple more questions on setup:

1. I run Muleassist for my group. So I use this social to get everyone started:
/mac muleassist tank
/dgge /mac muleassist name of Warrior

So this covers everyone in the group. Now with CWTN Cleric I don't want that anymore. I added a
/clr mode 1
But that just ran CWTN on top of Muleassist , which I read was a big no no. So how do I restructure my social to get everyone on Muleassist EXCEPT the Cleric? Do I just use a separate individual line for each char?

2. How do I remove Muleassist and MAUI from the Clerics ini files? I looked at all her personal ini's and I commented out the Muleassist and MAUI references in her firiona_NAME.ini file but MAUI still started up on her when I logged in.

[MAUI]
;INIFile=MuleAssist_server_PleaseDontReportMe.ini
;StartCommand=/mac muleassist assist ${Group.MainAssist}
Also MAUI is NOT included in the firiona_NAME.cfg file, just for reference. I only have Lootly and Lootier in it.

Thanks in advance for any and all help.

Vrak
 
Last edited by a moderator:
1. Do /end on the cleric, or just don't start it on them.

2. Just don't start it on them

3. Please don't post your toon names.
 
Thanks for the reply Sic, appreciate it.

1. That's what I was asking about. Is there a way to EXCLUDE the Cleric from that social?

2. It seems that MAUI is starting automatically, even though I commented it out of the ini. Is there another file I should look in?

3. Sorry about the toon name, I totally over looked it. Won't happen again.

4. New question. How do I issue a command (like pause or a mode change) to the Cleric from the driver. I tried including /clr pause on in my social but it wasn't recognized at all. Then I tried /cwtn /clr pause on. CWTN didn't like that, it came back with a /clr not recognized. What syntax do I use? Btw I added all the aliases that were listed in your Sic's Hotkey guide and made sure they were reloaded on all chars. Nevermind I figured it out. I used /cwtn pause on...that worked nicely.

Sorry about all these stupid questions, I am really not very good at all this syntax stuff.

Vrak
 
Last edited:
Vrakenor said:
Thanks for the reply Sic, appreciate it.

1. That's what I was asking about. Is there a way to EXCLUDE the Cleric from that social?

2. It seems that MAUI is starting automatically, even though I commented it out of the ini. Is there another file I should look in?

3. Sorry about the toon name, I totally over looked it. Won't happen again.

4. New question. How do I issue a command (like pause or a mode change) to the Cleric from the driver. I tried including /clr pause on in my social but it wasn't recognized at all. Then I tried /cwtn /clr pause on. CWTN didn't like that, it came back with a /clr not recognized. What syntax do I use? Btw I added all the aliases that were listed in your Sic's Hotkey guide and made sure they were reloaded on all chars.

Sorry about all these stupid questions, I am really not very good at all this syntax stuff.

Vrak
Click to expand...
1. here is how I exclude my cleric and shaman from a command
1675550013124.png
this tells everyone in my group (except any cleric or shaman) to issue the /backoffmob command
 
Thanks Robban

So if I use with dannet it would look like this:

/noparse /dgge /if (!${Select[${Me.Class.ShortName},CLR]}) /mac muleassist name of Warrior

Will that work? Is the syntax right?

Vrak
 
@Sic i have a question about paying for your programs. Do i just pay for 1 example cleric and then can use them on my two clerics or one pay per toon? i want to purchase the cleric and enchanter when they are ready. Thank you
 
TheZaz said:
@Sic i have a question about paying for your programs. Do i just pay for 1 example cleric and then can use them on my two clerics or one pay per toon? i want to purchase the cleric and enchanter when they are ready. Thank you
Click to expand...
You do not need to purchase more than 1 license per same class. Here
 
Sorry if this has been asked, but will my cleric (and shaman) use the Staff of Forbidden Rights if it is in my inventory?
 
Having a problem with my Cleric spamming Eleventh hour with its target over 35%. Is there any fix for this ?

Loving the plugin so far!
 
Baddmojo said:
Having a problem with my Cleric spamming Eleventh hour with its target over 35%. Is there any fix for this ?

Loving the plugin so far!
Click to expand...
Can you show me please (blank out character names). Show me target with health % and the mq2 cleric window casting it (with names blanked out)
 
Baddmojo said:
I'll try, it was my bard pulling and got back to camp. Will try and recreate it.
Click to expand...
think i see a typo for "Eleventh-Night" instead of "Eleventh-Hour" making it check at 45 instead of 35 if you are not in byos mode. will fix
 
When using the CWTN Plugin, and two clerics are in the group, how will they run? I know that if you have two game controlled mercenaries, it's kind of a less than savory experience. But, will the plugin fair better? After watching the Sic intro video, I am assuming some of the behaviors with healing can be tweaked for efficiency. Such as maybe have one cleric concentrate on certain healing types, while the other cleric does others kind of thing. Or adjust the values of each to react at different HP numbers? Any input would be helpful.

EDIT: I really should have put this in the plugin section. Sorry about that.
 
Last edited:
I do this all the time in my group when I want to turtle kill things. I change the healing presets on one of the clerics to be lower or higher than the other cleric so they are not healing at the same time. I have one cleric set to do DI and the other with it off and Grp Hot checked. So I get DI and HoTs as well. When you uncheck DI gem 6 is freed up and I pput the grp HoT in its place and check use HoTs.
 
Ragenrok said:
my cleric non stop casts shining fortitude anyone able to tell me how to fix this?
Click to expand...
You probably have something already that blocks it from landing. The getting started guide covers this situation and the answer is almost always to block the buff that won't land.
 
Sic said:
group heals -> single heals -> xtarget

rezzing - this obviously changes a bit depending on combat or not - as we wouldn't rez ourselves in combat
ma -> self -> xtarget -> raid

xtargets are always treated as non-MA xtarget toons
Click to expand...

Hey Sic, thanks for the info on this. Clerics have been fantastic so far, and much appreciated. I was noticing slightly slower heals and rezzes on a MT/MA in raids compared to normal grouping, and i can only assume (beyond lag) it would be from this priority chain. Easy fix, of course, for the grouped cleric to not have the MT/MA on xtar, pushing them to priority.

Or im reading it totally wrong!
 
Cryptonomicon said:
Hey Sic, thanks for the info on this. Clerics have been fantastic so far, and much appreciated. I was noticing slightly slower heals and rezzes on a MT/MA in raids compared to normal grouping, and i can only assume (beyond lag) it would be from this priority chain. Easy fix, of course, for the grouped cleric to not have the MT/MA on xtar, pushing them to priority.

Or im reading it totally wrong!
Click to expand...
if the ma/mt you're talking about is on xtarget, that is lower prio than yourself / your group, always
 
Cryptonomicon said:
Hey Sic, thanks for the info on this. Clerics have been fantastic so far, and much appreciated. I was noticing slightly slower heals and rezzes on a MT/MA in raids compared to normal grouping, and i can only assume (beyond lag) it would be from this priority chain. Easy fix, of course, for the grouped cleric to not have the MT/MA on xtar, pushing them to priority.

Or im reading it totally wrong!
Click to expand...
There is no Raid Main Tank role like there is a Group Main Tank role, so that's a non-factor. Your Raid Main Assist is usually a dps class picking targets. The way the plugin is setup is the proper priority. A cleric should be prioritizing themselves and the tanks in their own group before tanks outside of the group on xtarget.
 
Many_Whelps said:
There is no Raid Main Tank role like there is a Group Main Tank role, so that's a non-factor. Your Raid Main Assist is usually a dps class picking targets. The way the plugin is setup is the proper priority. A cleric should be prioritizing themselves and the tanks in their own group before tanks outside of the group on xtarget.
Click to expand...
Didnt say it was wrong, just learning to use the tools we have properly. For raiding, having the MT/MA when grouped with multiple healers, those healers in group with the MT/MA should not have the MT/MA on Xtar, which was new and welcome info to me and those i play with.
 
Cryptonomicon said:
Didnt say it was wrong, just learning to use the tools we have properly. For raiding, having the MT/MA when grouped with multiple healers, those healers in group with the MT/MA should not have the MT/MA on Xtar, which was new and welcome info to me and those i play with.
Click to expand...
No, it doesn't matter if they have redundant toons on xtarget, it just doesn't give you any benefit and is wasted checks.
 
I am trying to use this plugin with the emu client, but when I go to load the plugin it says it is not available. None of the class plugins are available actually. Has it changed to where the class plugins are free with test/emu client and I need to purchase?
 
Holofax said:
I am trying to use this plugin with the emu client, but when I go to load the plugin it says it is not available. None of the class plugins are available actually. Has it changed to where the class plugins are free with test/emu client and I need to purchase?
Click to expand...
They are included on test, but currently not available for emu - it is the first sticky in the cwtn section.

1682038322913.png

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
 
thank you sic...sorry for not paying attention. Was combing through your youtube and saw the plugin so got excited and resubbed to redguides for it, but appreciate the response
 
I use MQ2Cleric and the cleric will memorize retort (L120), shining fortitude (L119), and Ward of persistence (L117) but no matter what combination of buttons on the settings I select the cleric does not cast them on the tank (Shadow Knight)
The tank is assigned as both main tank & main assist
The tank has available buff slots and there are no "shadow of XYZ" type buffs from clickies
The tank is being run from a different computer from the cleric
Retort: UseRetort is checked

I PM'd CWTN and he mentioned to post on the forums if I met the above criteria.

Also, I couldn't find this on the boards so if I am missing the obvious please redirect and I will adjust tactics.
Thank you
 
CharlieMurpheyPHD said:
I use MQ2Cleric and the cleric will memorize retort (L120), shining fortitude (L119), and Ward of persistence (L117) but no matter what combination of buttons on the settings I select the cleric does not cast them on the tank (Shadow Knight)
The tank is assigned as both main tank & main assist
The tank has available buff slots and there are no "shadow of XYZ" type buffs from clickies
The tank is being run from a different computer from the cleric
Retort: UseRetort is checked

I PM'd CWTN and he mentioned to post on the forums if I met the above criteria.

Also, I couldn't find this on the boards so if I am missing the obvious please redirect and I will adjust tactics.
Thank you
Click to expand...
The tank is being run from a different computer from the cleric is your problem.

Q. Why does my cleric not buff the group?
A. You will need to run /plugin mq2cwtnbuffs load on all of your characters that you would like mq2cleric to buff. You also need to NOT be in /clr byos on mode. As "Bring Your Own Spells" assumes you want to handle your spells and your buffs. MQ2CWTNBuffs requires characters to be local characters (same PC, not across network or space/time).

Please look at:

www.redguides.com

Combat Assist - MQ2Cleric - Extra info

www.redguides.com www.redguides.com

For many good info's
 
CharlieMurpheyPHD said:
I use MQ2Cleric and the cleric will memorize retort (L120), shining fortitude (L119), and Ward of persistence (L117) but no matter what combination of buttons on the settings I select the cleric does not cast them on the tank (Shadow Knight)
The tank is assigned as both main tank & main assist
The tank has available buff slots and there are no "shadow of XYZ" type buffs from clickies
The tank is being run from a different computer from the cleric
Retort: UseRetort is checked

I PM'd CWTN and he mentioned to post on the forums if I met the above criteria.

Also, I couldn't find this on the boards so if I am missing the obvious please redirect and I will adjust tactics.
Thank you
Click to expand...
Always good to revisit the sticky

All of the plugins have a vid, a FAQ, a commands tab, etc.

Durango is correct here

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
 
You must log in or register to reply here.
Plugin - MQ2Cleric
Next unread thread 🦁

Users who are viewing this thread

  • DrmChld
Total: 2 (members: 1, guests: 1)
Back
Top
Cart

Cart

Total -