Plugin - MQ2Cleric (1 Viewer) 3.1.52471.11

[Sic]

Yea that makes sense as the clerics were probably all still stacked pretty tightly on top of each other from meleeing during the fight. Definitely would not expect clerics to communicate with each other to coordinate rezzes. There could be some value in randomizing that spawn selection slightly where it sees X corpses in a draggable radius, and rolls the dice to pick which one it is going to rez. That might also make it so in a single cleric situation, if one player isn't accepting a rez, there is a chance the cleric moves on to a different target before coming back to that one. I understand this scenario is outside the normal design for group play, so if that noticeably slows down the rez decision it might not be a good tradeoff.

they're bots - if you have them set to rez, they're going to rez the spawn that makes the most sense for them.

We don't have plans on trying to change that.

they're not going to ignore or skip someone - they can't read minds, so they don't know if maybe the person accidentally declined, or pressed escape to clear their windows being open or something like that - so they're going to try and keep doing their job since they have userez turned on.

the shortcoming / failure here is another character not having their rez accepting on, while you're telling your clerics to rez folks

cleric is like "i gotta rez bill, he's dead, rez him, still dead, that's weird, rez him again! c'mon bill you can do it"
bill is like "*absolutely braindead*"

 

[burdsjm]

I have a /bct cleric2 command that does a //hidecorpse all it keep other clerics going on heals.

 

[lilwizzie]

I have a /bct cleric2 command that does a //hidecorpse all it keep other clerics going on heals.

You can hide the corpses, or just turn off the rez option. I do something similar with my crew, set one for rez duty so the others stay on heal duty.

 

[Deleted member 241925]

Minor bug.

Level 21 cleric tries to mem Greater Healing and Celestial remedy in slot 2 over and over

use Celestial Regen is off in settings

BYOS stops it for now

This is on a live, free to play account.

 

[Iliketurtles]

I have been racking my brain and reading through the discussion and didn't see anything specific to what I am experiencing. If I missed it let the lashings begin.
Problem: Two of my clerics are continuously trying to mem spells in slot 2 over and over again.

I am in mode 3 and spell bar is empty. I unloaded the plugin and reloaded no joy. Any troubleshooting thoughts will be most welcome!

 

[Iliketurtles]

Minor bug.

Level 21 cleric tries to mem Greater Healing and Celestial remedy in slot 2 over and over

use Celestial Regen is off in settings

BYOS stops it for now

This is on a live, free to play account.

Jinx didn't see your post when I posted mine!

 

[Sic]

I have been racking my brain and reading through the discussion and didn't see anything specific to what I am experiencing. If I missed it let the lashings begin.
Problem: Two of my clerics are continuously trying to mem spells in slot 2 over and over again.
View attachment 30867
I am in mode 3 and spell bar is empty. I unloaded the plugin and reloaded no joy. Any troubleshooting thoughts will be most welcome!

Minor bug.

Level 21 cleric tries to mem Greater Healing and Celestial remedy in slot 2 over and over

use Celestial Regen is off in settings

BYOS stops it for now

This is on a live, free to play account.

mode has nothing to do with it.

this is an error i made.

you'll have to byos until patch - I'll try and have it fixed for next patch

 

[Sic]

should be fixed for next update - I shot iliketurtles and hammack an updated file to check out

 

[Iliketurtles]

Working as expected! Thanks for the great support.

 

[Many_Whelps]

You're talking about the

Minor bug.

Level 21 cleric tries to mem Greater Healing and Celestial remedy in slot 2 over and over

use Celestial Regen is off in settings

BYOS stops it for now

This is on a live, free to play account.

celestial regen and celestial remedy are completely different things.

 

[Myysterio]

My cleric won't use her breastplate click approrpriately. How do i have her rune the during defensive burns on the MA or even just use it as a buff?

 

[Sic]

My cleric won't use her breastplate click approrpriately. How do i have her rune the during defensive burns on the MA or even just use it as a buff?

This was just added last update so you can add your merciful shield item to addclicky burn. it will target the MA and then use it. it doesn't do that in any other addclicky type, just burn. defensive is for when *you* get hit. so adding it to addclicky defensive is not correct (plus it isn't going to specify targeting your MA)

- "Merciful Shield" addclicky burn usage:
-- If you have a "Merciful Shield" item added to your burn addclicky, you will now target your MA before usage.

 

[Redbot]

Redbot updated MQ2Cleric with a new update entry:

6/22/2021

- Fixed an issue where some buffs were done from the "wrong" gem slot.
- Fixed memorization issue during lower levels reported by hammackj and iliketurtles.

Read the rest of this update entry...

 

[Brutaecus]

Hi!

So Cleric is level 54 now just got Mark of Retribution but never seems to cast it. Also just spam cast Remedy no other healing spells, It mems 4 healing spells only uses the one.

Great program btw.

 

[Sic]

Hi!

So Cleric is level 54 now just got Mark of Retribution but never seems to cast it. Also just spam cast Remedy no other healing spells, It mems 4 healing spells only uses the one.

Great program btw.

until the assist revap, you will need to have usemelee (and unfortunately battlemode) on to do nukes and damage shields

the healing usage is likely related to the cast/recover/recast time of the spell, and based on your healing value it is back available the next time you can cast a heal.

if you're in byos the remedy adheres to the healsheals threshold (because it is actually a healsheals spell), but if you are in nonbyos it uses your quickheal values - so you can adjust your quickheals and healsheals value so you use your remedy at a later time.

 

[Brutaecus]

until the assist revap, you will need to have usemelee on to do nukes and damage shields

the healing usage is likely related to the cast/recover/recast time of the spell, and based on your healing value it is back available the next time you can cast a heal.

if you're in byos the remedy adheres to the healsheals threshold (because it is actually a healsheals spell), but if you are in nonbyos it uses your quickheal values - so you can adjust your quickheals and healsheals value so you use your remedy at a later time.

Thanks for the advice, still learning.

 

[AnotherJohn]

Hi,
I am converting all my toons over to MQnext and have run into a problem with MQ2Cleric. I followed Sic's video and used the MacroQuestMigrator and all went well (Great video, helped a ton, thanks). I got a clean box so no errors there. When I went to load the group after getting MQnext setup I got the error "The procedure entry point pZoneInfo could not be located in the dynamic link library D:\MQnext\plugins\MQ2cleric.dll". Upon investigation I saw there is no MQ2cleric.dll in the MQnext\plugins folder. This was odd since all the other CWTN/Sic plugins made it there just fine.

My first attempt to fix was to copy the MQ2cleric.dll file from my old MQ2 folder. Still got the error. I then opened up the Launcher to reinstall it that way and noticed that it was missing and the other CWTN/sic plugin names had been changed to from MQ2xxxxx to Nextxxxxx (ie MQ2Shaman is now NextShaman). I doubled checked and MQ2Cleric is still being "watched" so not sure why it is not showing in the Launcher. I then went to the MQ2Cleric page and downloaded a fresh copy and moved it to the MQnext\plugins folder. I am still getting the error message. What would you suggest I try next to get things up and running? I think this is my last hurdle to getting up and running in MQnext, all the other CWTN/Sic plugins, RGMercs and Kissassist seem to be working so far.

Thanks, AnotherJohn

 

[Sic]

Hi,
I am converting all my toons over to MQnext and have run into a problem with MQ2Cleric. I followed Sic's video and used the MacroQuestMigrator and all went well (Great video, helped a ton, thanks). I got a clean box so no errors there. When I went to load the group after getting MQnext setup I got the error "The procedure entry point pZoneInfo could not be located in the dynamic link library D:\MQnext\plugins\MQ2cleric.dll". Upon investigation I saw there is no MQ2cleric.dll in the MQnext\plugins folder. This was odd since all the other CWTN/Sic plugins made it there just fine.

My first attempt to fix was to copy the MQ2cleric.dll file from my old MQ2 folder. Still got the error. I then opened up the Launcher to reinstall it that way and noticed that it was missing and the other CWTN/sic plugin names had been changed to from MQ2xxxxx to Nextxxxxx (ie MQ2Shaman is now NextShaman). I doubled checked and MQ2Cleric is still being "watched" so not sure why it is not showing in the Launcher. I then went to the MQ2Cleric page and downloaded a fresh copy and moved it to the MQnext\plugins folder. I am still getting the error message. What would you suggest I try next to get things up and running? I think this is my last hurdle to getting up and running in MQnext, all the other CWTN/Sic plugins, RGMercs and Kissassist seem to be working so far.

Thanks, AnotherJohn

don't manually download anything. use the launcher. you manually downloaded mq2cleric for regular mq2, and placed in your next installation - which doesn't work. the licenses for the temporary next situation isn't perfect and sometimes requires manual updates (like in this case).

so run the launcher again, you might have to hit re-install, so it downloads the correct nextcleric.

 

[AnotherJohn]

don't manually download anything. use the launcher. you manually downloaded mq2cleric for regular mq2, and placed in your next installation - which doesn't work. the licenses for the temporary next situation isn't perfect and sometimes requires manual updates (like in this case).

so run the launcher again, you might have to hit re-install, so it downloads the correct nextcleric.

Thanks for the quick response. MQ2Cleric or NextCleric is missing from my launcher. The only way I know to get it to show up is to make sure I am "watching" the resource. I have checked and I am watching MQ2Cleric. Is there another way to get MQ2Cleric/NextCleric to show up in the Launcher?

Just checked and MQ2Cleric still shows in the "Live" section of the Launcher.

Solved, in swithing from MQnext to live and back in the Launcher seems to have fixed it, NextCleric is now there. How weird.

 

[Sic]

Thanks for the quick response. MQ2Cleric or NextCleric is missing from my launcher. The only way I know to get it to show up is to make sure I am "watching" the resource. I have checked and I am watching MQ2Cleric. Is there another way to get MQ2Cleric/NextCleric to show up in the Launcher?

Just checked and MQ2Cleric still shows in the "Live" section of the Launcher.

you can't manage plugin resources by watching them or anything.

like i said the issue is a next issue - but i already manually intervened and updated so you had your mq2cleric license for next, or "NextCleric".

this is because you recently updated your mq2cleric license - and as mentioned in > This < thread, you have to msg cwtn or myself to get it manually updated.

try logging out and back in on the launcher and it should be visible.

 

[AnotherJohn]

you can't manage plugin resources by watching them or anything.

like i said the issue is a next issue - but i already manually intervened and updated so you had your mq2cleric license for next, or "NextCleric"

try logging out and back in on the launcher.

I guess that is why NextCleric suddenly appeared while I was playing with the Launcher. Thank you so much for the quick fix.

 

[Sic]

yw

 

[mb4xy3]

What checkbox do i need to click or unclick to get my clerics to buff with Blessing of Reverence? And, any chance we could get the clerics to self buff Armor of the Zealot first? After a wipe, the mana regen is nice to have.

 

[Sic]

What checkbox do i need to click or unclick to get my clerics to buff with Blessing of Reverence? And, any chance we could get the clerics to self buff Armor of the Zealot first? After a wipe, the mana regen is nice to have.

turn on usehand if you want to use the hand line of spells

I can move up the shielding check in the next major update I'm doing for cleric. We already check for Saint's Unity first, so it makes sense to move up the actual spell for non-Saint's Unity toons

 

[mb4xy3]

that did it, thanks!

 

[Sic]

/cough the super splash combo for the clerics /cough

Unyielding Censure https://everquest.allakhazam.com/db/spell.html?spell=58721
Restoring Splash https://everquest.allakhazam.com/db/spell.html?spell=58745

Love yah Sic!

I should finish some testing in the next few days - and *likely* have the cleric nuke revamp complete - which will include being able to use nukes without being in melee combat - and when memsplash is selected we'll pair with Unyielding.

(i know you know already because you've tested it, but i know a few folks have been asking for it)

 

[hellfyre]

All I can say is the new nuke and splash revamp is badass

 

[CazRaX]

I just noticed that my cleric seems to be casting Saint's Unity IX over and over whenever she does not have Shammy HP buff on. Even if Armor of Sincerity is on she will cast Unity as soon as it is up over and over. Not sure when this started since I don't really monitor her self buffing.

 

[Sic]

I just noticed that my cleric seems to be casting Saint's Unity IX over and over whenever she does not have Shammy HP buff on. Even if Armor of Sincerity is on she will cast Unity as soon as it is up over and over. Not sure when this started since I don't really monitor her self buffing.

yup, we have updates to the unity line stuff in next update - previous changes appeared to make them act funky

 

[CazRaX]

yup, we have updates to the unity line stuff in next update - previous changes appeared to make them act funky

Ahh, cool that is good to know.

 

[krause]

does the "usextargethealing" feature work?

I cant get this going for me. I have a raid containing 3 groups and want my 3 clerics to do cross heals.

So I get my Maintank in the xtarget window and switch usextargethealing on. But even if I raise the heal values to 100 not a single heal will fire.

I know it uses the values for notMA so thats not the point :-)

 

[mb4xy3]

Regarding the MA and Non MA heals and a raid setting. In a raid you can set multiple MA's, will the cleric's MA heals go to everyone tagged as an MA on the raid? I'd like my clerics to do the MA heal % for 2 of my warriors who I designate as MA, and everyone else gets different heal priorities.

 

[mb4xy3]

does the "usextargethealing" feature work?

I cant get this going for me. I have a raid containing 3 groups and want my 3 clerics to do cross heals.

So I get my Maintank in the xtarget window and switch usextargethealing on. But even if I raise the heal values to 100 not a single heal will fire.

I know it uses the values for notMA so thats not the point :-)

Did you set your tank as MA in the raid?

 

[krause]

yes I did.

But I asked for xtargetheals. This has nothing to do with MA I guess.

And to answer your question... in my raid setting (3 groups, 1 cleric per group) the clerics wont heal the MA or MT cross groups. Thtas why I tried the xtargetheal stuff but it seems to me this isnt working.

 

[Many_Whelps]

Regarding the MA and Non MA heals and a raid setting. In a raid you can set multiple MA's, will the cleric's MA heals go to everyone tagged as an MA on the raid? I'd like my clerics to do the MA heal % for 2 of my warriors who I designate as MA, and everyone else gets different heal priorities.

No, it will treat the MA selected in the mq2cleric UI window as their MA. So it will either be the group MA, or if you enable raid mode, the selected MA from the list.

 

[Many_Whelps]

yes I did.

But I asked for xtargetheals. This has nothing to do with MA I guess.

And to answer your question... in my raid setting (3 groups, 1 cleric per group) the clerics wont heal the MA or MT cross groups. Thtas why I tried the xtargetheal stuff but it seems to me this isnt working.

I use xtargethealing all the time and it works as advertised. Are you adding all the characters that you want healed to the clerics xtarget window?

 

[krause]

hmmm ok was looking at my clerics for several boss fights and even if first cleric was oom second or third one never healed my tank (was set MA for the raid and the clerics).

This is the reason I tried xtargetheals. Yes, all clerics got my tank in their xtarget window but they didnt heal him.

I will check if I got anthing else wrong that could cause the trouble.

Thanks for info so far sirs.

 

[ChatWithThisName]

does the "usextargethealing" feature work?

I cant get this going for me. I have a raid containing 3 groups and want my 3 clerics to do cross heals.

So I get my Maintank in the xtarget window and switch usextargethealing on. But even if I raise the heal values to 100 not a single heal will fire.

I know it uses the values for notMA so thats not the point :-)

Are you setting it as "Current target" or are you using "RaidAssist1" "RaidAssist2" etc? Should be current target.

 

[ChatWithThisName]

could also use RaidMode and set the RaidAssist # as the one you want to heal.

 

[Sic]

yup xtarget healing works