Question - level 10 warrior help

[jfcatch]

Not sure what I am doing wrong. I started up a new warrior and wanted him to pull with his bow and run back to the group (cleric & enchanter). I know with my previous group I had the SK pulling with spells and that seemed to work like a charm. For whatever reason I can't get my warrior to acknowledge that he is the puller when I load up Kiss assist. If I put in Puller or PullerTank in the ini he wont even leave camp. Just says "Assisting so and so". I can get the cleric to pull with a spell but then the warrior wont tank for some strange reason and I'd rather not have the cleric pulling. I put the item id in the MQmelee ini file for my bow, ranged and ammo. Posting my Ini below and hopefully somebody can see what I'm doing wrong.

General]
KissAssistVer=8.4.2
Role=PullerTank
CampRadius=50
CampRadiusExceed=400
ReturnToCamp=1
ChaseAssist=0
ChaseDistance=25
MedOn=0
MedStart=0
MedCombat=0
LootOn=0
RezAcceptOn=1
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=0
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0
[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist
[Buffs]
BuffsOn=0
Buffs1=NULL
Buffs2=NULL
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
CheckBuffsTimer=20
[Melee]
AssistAt=99
MeleeOn=1
FaceMobOn=1
MeleeDistance=40
StickHow=on
AutoFireOn=1
[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
[DPS]
DPSOn=0
DPSSkip=20
DPSInterval=2
DPS1=NULL
DPS2=NULL
DPS3=NULL
DPS4=NULL
DPS5=NULL
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0
[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL
Cures4=NULL
Cures5=NULL
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
[Pull]
PullWith=Shaped Darkwood Compound Bow|Arrow
MaxRadius=500
MaxZRange=300
PullWait=0
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92

[MQ2Rez]
Soundfile=C:\Users\Owner\Desktop\mq2\mq2rez.wav
Accept=1
[MQ2Melee]
aggro=0
arrow=8005
bash=1
bow=8853
disarm=1
enrage=1
facing=1
infuriate=1
kick=1
melee=1
plugin=1
provokeend=20
provokemax=1
provokeonce=1
range=8853
resume=75
slam=1
stickbreak=1
stickrange=75
taunt=1
version=7.080

 

[Gohast]

Are you targeting yourself when you /mac kissassist?

 

[Meistro]

Are you equipping the bow and arrow before you start macro?
Are the names spelled correctly?
Are you running the newest compile, updated KA?


What is that # you have noted in range?
range=8853 ??

range=[0-250]
Enables ranged attacks when target is at or beyond this range. Note that 0 disables ranged attacks completely.

Set it to something like 20 or so...

 

[jfcatch]

Thanks for the responses!

1. I am targeting myself and the cleric and both have no effect on pulling.
2. The bow and arrow are both equipped. The range=8853 was my attempt at telling it what ranged item to use. I tried it both ways. I set it back to 20 now that its obviously not used for that.
3. I am running the newest compile and have since re-updated KA, no effect.

- - - Updated - - -

It's almost like it doesn't recognize the 'puller' tag. When I click on myself or the cleric it keeps telling me I'm 'kissassisting >>xxy<< at 99%"

- - - Updated - - -

So now I set up the warrior as Puller Tank and cleric as Puller. Cleric runs off, nukes something, runs back and warrior jumps it. The warrior never tries to pull but seems to assist the cleric (I have him 'puller tank' and target cleric for kissassisting).

 

[Randyleo]

Do you have group roles set?

 

[jfcatch]

I do, but now I noticed my warrior doesn't have 'extended windows' working yet 3 other instances of eq do! Strange. I'll work on fixing that now.

- - - Updated - - -

So I got the Extended Target window open and that helped his assisting when a mob is in camp but hasnt fixed the refusal to pull. lol.

 

[Meistro]

After you changed the MQ2 SERVERNAME_TOONNAME.ini file did you /melee load to load it?
but noted a couple other things...

General]
 KissAssistVer=8.4.2
 Role=PullerTank <== with this set here, you are only targeting self and /mac kissassist yes?
 CampRadius=50
 CampRadiusExceed=400
 ReturnToCamp=1
 ChaseAssist=0
 ChaseDistance=25
 MedOn=0
 MedStart=0
 MedCombat=0
 LootOn=0
 RezAcceptOn=1
 AcceptInvitesOn=1
 GroupWatchOn=1
 EQBCOn=0
 IRCOn=0
 MiscGem=8
 HoTTOn=0
 CampfireOn=0
 [SpellSet]
 LoadSpellSet=0
 SpellSetName=KissAssist
 [Buffs]
 BuffsOn=0
 Buffs1=NULL
 Buffs2=NULL
 Buffs3=NULL
 Buffs4=NULL
 Buffs5=NULL
 Buffs6=NULL
 Buffs7=NULL
 Buffs8=NULL
 Buffs9=NULL
 Buffs10=NULL
 Buffs11=NULL
 Buffs12=NULL
 Buffs13=NULL
 Buffs14=NULL
 Buffs15=NULL
 Buffs16=NULL
 Buffs17=NULL
 Buffs18=NULL
 Buffs19=NULL
 Buffs20=NULL
 RebuffOn=1
 CheckBuffsTimer=20
 [Melee]
 AssistAt=99
 MeleeOn=1
 FaceMobOn=1
 MeleeDistance=40
 StickHow=on <==Should probably be Front, not on....this is sopused to be how you stick to the mob not if..For MainTank Front is usually good
 AutoFireOn=1 <==Should Probably be 0 (off) your not going to tanking shooting arrows 
[AE]
 AEOn=0
 AERadius=50
 AE1=NULL
 AE2=NULL
 AE3=NULL
 AE4=NULL
 AE5=NULL
 [DPS]
 DPSOn=0 <==Would set this at 2 (don't know if it makes a difference with puller tank mode, but does wilth petpullertank
 DPSSkip=20
 DPSInterval=2
 DPS1=NULL <==I would put SOMETHING here, Taunt, Kick, ANTHING (and set DPPSON=2) 
DPS2=NULL
 DPS3=NULL
 DPS4=NULL
 DPS5=NULL
 DPS6=NULL
 DPS7=NULL
 DPS8=NULL
 DPS9=NULL
 DPS10=NULL
 DPS11=NULL
 DPS12=NULL
 DPS13=NULL
 DPS14=NULL
 DPS15=NULL
 [Aggro]
 AggroOn=0
 Aggro1=NULL
 Aggro2=NULL
 Aggro3=NULL
 [Heals]
 Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
 HealsOn=0
 Heals1=NULL
 Heals2=NULL
 Heals3=NULL
 Heals4=NULL
 Heals5=NULL
 XTarHeal=0
 [Cures]
 CuresOn=0
 Cures1=NULL
 Cures2=NULL
 Cures3=NULL
 Cures4=NULL
 Cures5=NULL
 [Burn]
 BurnText=Decepticons Attack
 BurnAllNamed=0
 Burn1=NULL
 Burn2=NULL
 Burn3=NULL
 Burn4=NULL
 Burn5=NULL
 Burn6=NULL
 Burn7=NULL
 Burn8=NULL
 Burn9=NULL
 Burn10=NULL
 Burn11=NULL
 Burn12=NULL
 Burn13=NULL
 Burn14=NULL
 Burn15=NULL
 [Pull]
 PullWith=Shaped Darkwood Compound Bow|Arrow
 MaxRadius=500
 MaxZRange=300 <==Really a vertical range of 300?? If your runing up and down hills THAT much you might be in the wrong place 
PullWait=0
 PullRoleToggle=0
 ChainPull=0
 ChainPullHP=90
 ChainPullPause=30|2
 [AFKTools]
 AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
 AFKToolsOn=0
 AFKGMAction=1 <==It SHOULDN'T make a difference but try this set at 0 (Off) 
AFKPCRadius=150
 CampOnDeath=0
 ClickBacktoCamp=0
 [Merc]
 Help=To use: Turn off Auto Assist in Manage Mercenary Window
 MercOn=0
 MercAssistAt=92

 [MQ2Rez]
 Soundfile=C:\Users\Owner\Desktop\mq2\mq2rez.wav
 Accept=1
 [MQ2Melee]
 aggro=0 <== If you are MainTank, this should be set to 1 so you TRY to keep agro 
 arrow=8005 <==Verify this # (just incase)
 bash=1
 bow=8853 <==Verify this # (Just incase)
 disarm=1
 enrage=1
 facing=1
 infuriate=1
 kick=1
 melee=1
 plugin=1
 provokeend=20
 provokemax=1
 provokeonce=1
 range=8853 <==On My Warrior (MainTank) this is set to 0, and he pulls with thrown items, might want to try 0.
 resume=75
 slam=1
 stickbreak=1
 stickrange=75
 taunt=1
 version=7.080

Don't know if any of it will make a difference, but that's what I see.....
After you mke the changes, In MQ2chat window type /melee load, and then restart KA...and Good Luck..8)

 

[jfcatch]

And it worked! You are the best, as usual! I don't know which change made the biggest impact because I did them all at one time!

- - - Updated - - -

Oh, one more question. When I brought back my extended target window, i lost my advanced dps window (which I just recently discovered). I'd love to have it back so i can track how each INI setup does dps wise.

 

[Meistro]

Not really sure but a couple of things you could try are ( on the toon that is missing it):

/plugin MQ2DPSAdv

if that doesn't work try

/plugin MQ2DPSAdv unload
/plugin MQ2DPSAdv

or just shut it all down and restart it all