Question - Kissassist+Mq2Nav pulling issue

[llarrswind]

I recently (Within the last couple hours) got Mq2Nav setup, I wanted to try it out so I set off for Crypt of Decay. I experienced the move back and forth thing, after I engaged the mob and the idiot toon tried to move back to where I had started /mac kissassist pullertank. I have /returntocamp=0 in his ini. I closed EQ, MQ2, everything and reopened it. reloaded same issues. I moved to HoHonora, where I was able to pull mobs and navigate back to the start point, however, this is not what I want the idiot to do. I'd like for him to kill mob, move on, kill move on. Any idea what might be causing this? Or how to get the desired actions to take place?

[General]KissAssistVer=10.1.4
Role=Assist
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=40
MedCombat=0
LootOn=0
RezAcceptOn=1
AcceptInvitesOn=1
GroupWatchOn=0
EQBCOn=1
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0
CastingInterruptOn=0
CharInfo=Berserker|92|####
DefaultUI=TRUE
DPSMeter=1
ScatterOn=0
ConditionsOn=0
[Buffs]
BuffsOn=1
Buffs1=Fourth wind|end|60
Buffs2=NULL
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
ChecKBuffsTimer=20
BuffsCOn=0
BuffsSize=20
PowerSource=NULL
[Melee]
AssistAt=98
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0
UseMQ2Melee=1
BeforeCombat=Cast Before Melee Disc
[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
AECOn=0
AESize=10
AE6=NULL
AE7=NULL
AE8=NULL
AE9=NULL
AE10=NULL
[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=Frenzy|98
DPS2=Overpowering Frenzy|98
DPS3=Eradicator's Volley|98
DPS4=Vigorous Axe Throw|98
DPS5=Axe of Rallos|98
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
DPSCOn=0
DPSSize=20
DPS16=NULL
DPS17=NULL
DPS18=NULL
DPS19=NULL
DPS20=NULL
DebuffAllOn=0
[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
AggroSize=5
Aggro4=NULL
Aggro5=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0
HealsCOn=0
HealsSize=5
XTarHeal2=0
HealGroupPetsOn=0
[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL
CuresSize=5
Cures4=NULL
Cures5=NULL
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=Savage Spirit
Burn2=Reckless Abandon
Burn3=Fundament: Third Spire of Savagery
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
BurnCOn=0
BurnSize=15
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
UseTribute=0
[Pull]
PullWith=Melee
MaxRadius=350
MaxZRange=50
PullWait=0
PullMeleeStick=0
UseWayPointZ=0
PullRadiusToUse=90
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2
PullLevel=0|0
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92
[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist
[GMail]
GMailHelp=Events currently support - Dead,Drag,GM,Level,Named,Leftgroup
GMailOn=0
GMailSize=5
GMail1=NULL
GMail2=NULL
GMail3=NULL
GMail4=NULL
GMail5=NULL

 

[ctaylor22]

what command are you using to start kiss?

 

[llarrswind]

I target the toon and type /mac kissassist pullertank

 

[ctaylor22]

You may want to look at using hunter mode. a puller will always return to camp after a pull. that's just part of the mechanics of a puller. A hunter on the other hand is just that hunt down a mob and kill it, then move on to the next mob...

 

[minniemmee24]

/mac kissassist hunter ftw

 

[llarrswind]

I was apparently running an older version of kiss, I updated to 10.2.2 and now it's really screwed. I don't even get a path showing a possible route. I can see the mesh in game, going to try and load a newer (no idea) version of mq2nav and the other files. Ty for the responses.

 

[kett73]

Same pulling in HOH is completely screwed. Takes my puller 20-30 secs to find a target. I have also noticed that my system lags out as its going through the can't find navmesh spam.

 

[ctaylor22]

95% of the time this is not a kiss problem, but an nav mesh problem. Try targeting a mob and then use /nav id ${Target.ID} but be ready to use /nav stop. Another thing you can try is target a mob and then /echo ${Navigation.PathExists[id ${Target.ID}]}.

 

[kett73]

I targeted a mob and typed /nav id ${Target.ID} and ran straight to the mob. I wasn't having an issue until i replaced kiss with the newest version. I also targeted a mob and typed /echo ${Navigation.PathExists[id ${Target.ID}]} and it returned TRUE.

 

[Kneeclipper]

the nav error is a messed up mesh.. i had the same problem.. see the -788.. its trying to get u to the location beneath where u are standing.. u can manually target a mob and it will work occasionally but then spams that error once its dead.. delete ur mesh and rebuild it.. and while its building look to see if the ground is being covered or if its doing it under the map.. if its under or below just adjust the cell height until its covering the ground properly. and as far as it crawling.. like they said.. /mac kissassist hunter and turn /chaseon for all the other toons.. that way they will follow the tank =)

 

[kett73]

I am rebuilding the mess as I type this, but it was not below the floor. I increased the cell high just a bit and I will give that a try to see what happens.

Update: Increasing my cell height a small amount fixed my pull issues. Thanks!!

 

[Kneeclipper]

anytime.. i beat my head against the same thing and dug around and found something about raising the tile/cell height that ctaylor has posted to someone.. not really my idea but its something i encountered myself and it was fresh on my mind =) glad it could help

 

[llarrswind]

i'm an idiot, and gave up on this problem. I just don't afk because well i cannot pull anything. everything else works for my group while I just manually pull with my warrior. Thanks for the help guys.

 

[klompr]

/bcaa //camphere off
/chaseme

 

[llarrswind]

Since this, i've completely reinstalled MQ2 from here, recently I cannot even have Mq2Nav on it just crashes my game non stop. I am not even using the plugin, it is now disabled in mq2.ini