• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

KissAssist Release KissAssist 4.0 Updated 09/02/2011

I can't wait any longer for GOM functionality! :) Oh and the beastlord swarm pet stuff. Even though I don't play him as much as I used to. When will we see 4.1? It's time to go out and buy discounted halloween candy now that the big day is over, and I was hoping to be playing with a [GOM] section now. Also is it going to be just one spell type of deal or like a burn section where you can set multiple spells if you keep getting GOM's but one of the spells is still down that you use.. I am sorry if it's too late to be asking about that but I am curious. :)
 
Still leveling my beastlord to 90, 87 atm so almost there and GoM will be 1 spell initially. I will think about multiple later.
 
IF you are using a beastlord with the 4.0 ini it is already code'ed to work with swarm pet , as i have used it and use it every day , dps1=Swarm pet name|%
this is worked for me since i started using kissassist , 4.0 The only thing is the mob's die at different pace's and ur dps casting u have to tweak if u have ur dps mode set to cast spells instanly as they pop u will prolly never see it cast , i use my dps for my spells at 35 as thats enough time for the spells to refresh and to cycle threw the spells' and with kiss assist ini i have running my 90 10k aa T3 hot raid geared beasty averages without burning and keeps 11k dps group
 
Last edited:
Clerics get two new buffs in VoA:

Unified Credence: two buffs - Credence and Blessing of Assurance (hp/ac and spell haste)

Unity of the Triumvirate: three buffs - Symbol of the Triumvirate, Ward of the Zealous and Blessing of Assurance (symbol, ac, spell haste)

I tried to setup the first in buffs section as:

Buff6=Unified Credence|Dual|Credence

When i start mac, it will go through its buff routine and cast it on everyone (even if they already have the buff) and then all I get is "[MQ2] Clicking > Credence <" over and over and over. If I remove the Dual|Credence, it does what you'd anticpate, casts Unified Credence nonstop

Thoughts?

edit: if I change the buff line to Buff6=Unified Credence|Dual|Blessing of Assurance it does absolutely nothing.
 
You have the correct syntax.. GRrr no I can't code for it until I get my hands on a higher lev cleric. I have been so busy updating shit in the compile I haven't even stepped into VoA yet let alone had time to start debugging Kiss. Might be something that will have to be hard coded specially for the spell. I will add it to my list and I get to soon as I can.
 
Scorn said:
Clerics get two new buffs in VoA:

Unified Credence: two buffs - Credence and Blessing of Assurance (hp/ac and spell haste)

Unity of the Triumvirate: three buffs - Symbol of the Triumvirate, Ward of the Zealous and Blessing of Assurance (symbol, ac, spell haste)

I tried to setup the first in buffs section as:

Buff6=Unified Credence|Dual|Credence

When i start mac, it will go through its buff routine and cast it on everyone (even if they already have the buff) and then all I get is "[MQ2] Clicking > Credence <" over and over and over. If I remove the Dual|Credence, it does what you'd anticpate, casts Unified Credence nonstop

Thoughts?

edit: if I change the buff line to Buff6=Unified Credence|Dual|Blessing of Assurance it does absolutely nothing.
Click to expand...

RK1
Rich (BB code): 
Buff6=Unified Credence|Dual|Blessing of Assurance

RK2
Rich (BB code): 
Buff6=Unified Credence rk. ii|Dual|Blessing of Assurance rk. ii

RK3
Rich (BB code): 
Buff6=Unified Credence rk. iii|Dual|Blessing of Assurance rk. iii

RK1
Rich (BB code): 
Buff6=Unified Hand of Credence|Dual|Blessing of Assurance

RK2
Rich (BB code): 
Buff6=Unified Hand of Credence rk. ii|Dual|Blessing of Assurance rk. ii

RK3
Rich (BB code): 
Buff6=Unified Hand of Credence rk. iii|Dual|Blessing of Assurance rk. iii

Better to use Blessing of Assurance as the one to check for since it is the buff that is the shorter duration of the two. Also IF You have the Rk2 you need to note that in your ini file because noting it as a RK1 will result in it not being cast at all! :)
 
Maybe I am missing something, but is it possible to have KissAssist setup for a druid to use debuffs/dots without it repeating the spells? I tried addindt epic clicking (prog server, so epic 1.0) and ensnare, but it just keeps casting it.

Also is there any way to have it automatically cure poison/disease?
 
TLP servers 4.0 is buggy but it should only recast tthe dot afters its worn off and no on cures
 
Maskoi said:
TLP servers 4.0 is buggy but it should only recast tthe dot afters its worn off and no on cures
Click to expand...

Thanks for the reply, any way to make it announce in group when it casts a heal for instance?
 
I am having problems with my SK not assisting my bard when I bring mobs back he is having like a 10 second delay after I get into camp any one else having this problems?

My cleric Also is slow at healing.

they were working good before I went to new expansion and did a few missions got new spells and added them now it is doing this.
 
Last edited:
mitrestre said:
I am having problems with my SK not assisting my bard when I bring mobs back he is having like a 10 second delay after I get into camp any one else having this problems?

My cleric Also is slow at healing.

they were working good before I went to new expansion and did a few missions got new spells and added them now it is doing this.
Click to expand...

Try this for heals:

[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=1
Heals1=Zealous Light|80
Heals2=Faithful Remedy|50
Heals3=Fervent Renewal|60
Heals4=Fourteenth Catalyst|40
Heals5=Word of Rehabilitation|90
Heals6=Zealous Light|80
Heals7=Burst of Life|80
Heals8=Divine Arbitration|40
 
I'm really enjoying the macro; its the first ive used and im still getting accustomed to it, but so far is been very helpful. A suggestion for future editions (or maybe its already available?) A method for a character with a suspended healer merc to recognize when a grouped character dies and then unsuspend their healer. Helpful when the normal healer dies but other characters in group survive the fight.
 
Glad you like it. You can't pop a merc during combat or if the group is full. If the group isn't full I would have the healer merc out anyways. :)
 
Well, basically i had a group of 4: a 90 tank, two lower level charcters getting pl'ed, and one healer merc. Due to logistical issues, the tank and healer merc died, leaving the two lower level invis alts who didnt get aggro. If the macro could be coded to unsuspend a healer merc upon the death of a player (and then resuspended after it performs the res), the tank wouldve been automatically resed and the macro would continue normally.
 
Ewwww ahhhh Kiss=keep it simple stupid is the motto that's a little beyond the scope of anything I had planned. Sorry :(. I was thinking of adding a feature to campfire back though.
 
I love the kissassist macro, and all the input on it as well. It's been working great for me. :)

I do have a question though. How would you set a healing character to only be targetting the MA? I have a healer toon that does some debuffs, but sometimes I just want the toon staying on the MA so there's no unnecessary switching around.

I've tried DPSOn=0 and that doesn't do it. The toon keeps targetting the mob that the MA is on, then toggles back when the heal % on the MA is below the set % for the heal(s).

Should I blank out all the DPS1=xxx , DPS2=yyy, etc commands? Or is there some other setting I should be looking at?
 
I am working on that but for now on the heal spells try |MA that tells kiss to just target the tank
Heals1=Spell|85|MA like Heals1=Burst of Life|25|MA

Also make sure you are using 4.4 this thread is old 4.0
 
You must log in or register to reply here.
KissAssist Release KissAssist 4.0 Updated 09/02/2011
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -