Re: KissAssist v10.2.6 Relaesed 05/10/2018
KissAssist 10.2.6 Released 05/10/2018
Changes this release:
Added Tells as an option to Gmail.
The CastMount routine will now use condition checks. So if you created a condition for your Mount buff entry,
it will now check the condition before casting your mount.
Rezall switches added.
/rezallon and /rezalloff. (Off by default)
Rezzers will try to rez a corpse 3 times, then add the corpse to the not to rez list. Turning rezall off will reset the not to rez list.
Note: All other rezzing still works the same. If there is a corpse that is a member of your group, Fellowship, and/or Guild.
there is no limit on the number of times they will try and be rezzed.
You can now have multiple items to rez with.
AutoRezWith: AA/Spell/Item
AutoRez1: AA/Spell/Item (Defaults to AutoRezWith)
AutoRez2: AA/Spell/Item
AutoRez3: AA/Spell/Item
/Stayhere alias added.
So now you have 3 aliases to use when dragging your group around the zone(s).
use /camphere to set camp at current location, and stop chasing.
Use /chase to abort camp and start following.
Use /stayhere to stop following, but don't make camp and just stay put where you are.
Added Before Combat check that allows for an action to be executed before turning on /attack.
Use the ambush tag at the end of your DPS entry to add this to the BeforeArray. Works with conditions.
Allows 5 entries and is used like so:
DPS1=Moving Mountains|100|ambush
DPS2=Slap in the face|95|ambush
XTarget Healing has been changed. You can now use all XTarget entrys as heal targets.
XTarget Healing options:
XTarHeal=0:
Will Heal Self, MainAssist, and Group. XTargets are ignored.
XTarHeal=1:
Will Heal Self, MainAssist, Group and XTargets
XTarHeal=2:
Will Heal Self, MainAssist, and XTargets. Ignores the Group.
To set what XTargets to check for heals, set:
XTarHealList=1
This will check the first XTarget only.
XTarHealList=1|2
This will check the first and Second XTarget.
XTarHealList=1|3|5|7
This will check the first, third, fifth, AND seventh XTarget.
XTarHealList=all
This will try and use every XTarget.
Note: When using XTargets for healing, XTargets will be checked for Rezzing as well.
Note: You should have all your XTargets setup before starting Kissassist, and if you add or remove entries to your XTarget window,
you will need to restart kissassist
Made changes to how stick is used in Combat.
If you have UseMQ2Melee turned on then you will need to setup MQ2Melee stick commands.
Kiss will not use /stick commands in combat if you have MQ2Melee turned on.
StickHow=0:
Will use the /stick id ${Target.ID} command so you will have to tweak the MQ2MoveUtils settings for /stick.
StickHow=yourstickoptions:
will issue the /stick ${Target.MaxRangeTo} id ${Target.ID} ${StickHow} command.
Note: Kiss will try and use Max melee distance, so if you want to close the gap/get closser to the mob, use the % option in your StickHow option.
Example: StickHow=MoveBack 50% loose. This will move you back to 50% of targets MAX melee radius using loose movements.
Note: If durring Combat, you are to close to a mob, and can't see it. Kiss will try and back you up untill you can see the mob.
DPS, and Burn got a command Tag added.
The new command tag has 2 paramaters and can be used as follows:
DPS1=command|MobHP|Param1|Param2
Param2 is optional but Param1 is the command itself withOUT the /. Param2 would be used if the command itself required a paramter.
This can also be used with the mash, weave, and ambush tags. But the mash, weave, and ambush tag must be the last tag on the entry.
DPS1=command|99|stopdisc|ambush
DPS2=command|99|removebuff|levitation
DPS3=command|99|stopdisc|mash
DPS4=command|100|bandolier|activate shield
Note: The command tag is not setup to use ${Variables} in any of the paramaters. Conditionals are required.
Buffs and Heals got a class tag.
Buffs1=Buff to cast|class|war,ber,pal
Buffs2=Buff to cast|dual|Buff to check|class|clr,enc,dru
Heals1=Heal to cast|90|class|wiz,mag,enc
Class when used with dual has to be placed at the end of the entry.
Added Mass Group Buffing.
Uses Tranquil Blessing AA Not Mass Group Buff AA.
Will Not cast Group only spells(Group_V1).
You have to be in active or resting combat state.
Caster must NOT have the Buff.
Lootstuff routine now checks if MQ2Autoloot Plugin is loaded and active. Will allow Autoloot plugin to handle looting.
Added code that helps to keep GOM from hijacking heals and mezzing.
Clerics that are non-DPS will now burn named if BurnAllNamed is on.
Plus various other changes...
KissAssist 10.2.5 Released 02/25/2018
Changes this release:
This is mainly a maintenance update. Made some little fixes, but no new features.
Casting Interrupts
Major Heals fix if you use interrupts. Fixed error preventing Kiss from leaving current heal target.
Final Bard Medding fixes
KissAssist 10.2.4 Released 02/04/2018
Changes this release:
Puller Not waiting after No mobs found to pull. Fixed the message that was getting spammed.
Fixed a problem with blank entries getting added to /alert lists.
Added a change to the BackOff command. You can now pass a parameter to force ON or Off.
The standard /backoff command still toggles backoff on and off, the new paramters are: on, off, 1, and 0.
Use: /setbackoff on
/setbackoff 1
/setbackoff off
/setbackoff 0
Added the use of Caster and Melee to the dual tag.
Example: Buff1=Spell To Cast|Dual|Buff To Check|Caster
Buff2=Spell To Cast|Dual|Buff To Check|Melee
The Caster and Melee Tags MUST be at the end when used with dual.
GOM Events are now Bypassed when mezzing and healing.
Hybrids now Mash and Weave when in GOM while waiting for Spell Global cool down.
Fixed spam about not having EQBC Loaded, when you didn't want to use the plugin. REALLY!, Who doesn't want to use EQBC?
Fixed an issue with the weave routine getting skipped in certain situations, and the Mash routine not mashing like it should.
Changed some of the Combat logic, /stick should be more persistent for melee characters.
Fixed an issue in the heal routine. When the current target died before getting the heal cast. Now exits the routine properly.
Made some tweaks to the debuff routine to speed it up a bit.
Added a new bind to help with an issue while in chase mode. When trying to get other characters to follow/chase you, there is an issue if the character is memming a spell when you use EQBC to send the command to other characters. Using this bind will set the character to NOT Moveable while they are memming the spell. The character will finish memming the spell before trying to chase after you. I created a new /aliase /trackme
The new /trackme aliase has 3 parameters and should be called using /trackme 0 0 0, to use the standard /chase logic.
Here is an explanation of the 3 parameters:
First: StickOff 0-Ignore. 1-Turn /stick off when you reach your destination.
Second: UseNavOnly 0-Ignore. Will still try and use Navigation, But does NO validation. 1-Check to make sure Navigation is loaded and there is a mesh loaded, and a path exists to your target.
Third: IgnoreDistance 0-use current CampRadiusExceed distance. 1-Change CampRadiusExceed = 100000. Use this carefully. This will allow you to send your character across the zone.
Along with this change /chase will now try and use /nav first and /moveto second, and once within /stick range will stop /nav, and switch over to /stick.
KissAssist 10.2.3 Released 01/06/2018
More Bard fixes
KissAssist 10.2.2 Released 12/27/2017
Final Bard item casting fix.
KissAssist 10.2.1 Released 12/27/2017
Bard item casting tweak.
KissAssist 10.2 Released 12/27/2017
Bards are sooooooo SMmmooooooooooooove again.
BARDS FIXED
FUCKING GEM 5 ERROR FIXED
Changes since 10.1 - 10.1.4
Turbo changed from 80 to 120
Missing bites, gores,rampages,smashes added to Got Hit event
Replaced most /goto with /break or /continue to update and stream line Kiss for latest MQ2 updates
Tweaked mob distance checks to be more aware of character xyz in and out of camp
Added some labels for better Debugging
Mash AA fix
Toons not returning to camp fixed
Check ini will not show missing items due to summoned items not being in inventory on startup
New command added /chaseme
/chaseme will make all toons running Kiss follow who ever issuses the /chaseme command Requires MQ2EQBC to be loaded.
/switch has been changed /switchnow. So check all of your hotkeys if you use this command
Drag added to Gmail Events
The puller now will drag their corpse back to camp from out in the field if they died for a rez if he comes within 80' of it while pulling
Kiss no longer saves settings to mq2moveutils ini file. - From EQmules version
Conditions have been added to AE section.
Kiss will now add a _I to instanced zone names in KissAssist_Info.ini file to indicate the zone is an instance
Cast Section revamped
Pull section revamped
Bard not twisting randomly Fixed
Changed to use the 13th spellgem.
