Guide - AFK Exp/AA Chelsith Reborn beach 75+

[Razkle]

This zone requires getting attuned for easy access from this quest... Chelsith Reborn Attune

Once attuned you can easily get there by shards landing.

What I love about this zone is the spot you are at is 100% safe from accidental pulls! No Agro or KoS mobs will get you! You only fight what you pull! And good luck clearing the whole field of Crocks, Turtles and fisherman!

There is 1 named that is pretty tough but manageable Floppy flick the awesome thing is all the shissar can drop Corrupted Shissar Fang that can be turned in for shissar ornamental gear.

I usually put 4 100s and 2 70+ toons or 3 105s and 3 75+ toons here to level as fast as you can kill!

the drops are mostly diamonds and tainted feathers and animal fearbone by the boatload.

If you want to wander farther in there is a nice 42ac aug that drops here too!

anyway for the guide....

Keep in mind NO ONE really comes here, so its great for AFK! AND nothing is KOS to you so its fighting what you pull only and almost 90% of the time it is SINGLE pulls or some double pulls, that's it! CAKE!

Park your team with their backs against the rock wall and face out to the open ocean, have your tank set to 500 or 600 and pull away!



There is a quest that is infinitely repeatable too!

A Fishy Situation


Quest Giver: Silchek 






Requirements: Level 85
Request Phrase: kill
Time Limit: Unlimited
Task Type: Solo
Lockout: 6 Hours
Repeatable: Yes

Rewards
•Experience
•112 Platinum, 5 Gold


Achievements
•Mercenary of the Chelsith Reborn
 
Task Steps:
•Kll some turtles 0/2 (Chelsith Reborn) More Info
•Kill some crocodiles 0/4 (Chelsith Reborn) More Info
•Speak with Silchek 0/1 (Chelsith Reborn) More Info
 







Walkthrough:



•Kll some turtles 0/2 (Chelsith Reborn) •Kill 2 turtles, found all over the beach

 
•Kill some crocodiles 0/4 (Chelsith Reborn) •Kill 4 crocodiles, found all over the beach

 
•Speak with Silchek 0/1 (Chelsith Reborn) •Return to and Hail Silchek (as indicated by  on the map)

- - - Updated - - -

BTW when TDS came out I leveled my main team to 105 here, brother island was just too crowded! This is my #1 favorite spot to AFK for exp/aa

 

[crazykcards]

What do the non labeled dots on your map represent?

 

[Razkle]

quest givers in zone, the green 1 is the only one you will prolly use...

 

[psimoon]

BTW when TDS came out I leveled my main team to 105 here, brother island was just too crowded! This is my #1 favorite spot to AFK for exp/aa

Did you camp on the beach until lvl 105 or did you move on in further?

I fiind I run out of mobs as I leave the snake fisherman alone. I pulled Floppy Flick once and he wasted us.

It is a nice spot but I am guessing the exp gets slow after 101+

Thanks for the posting.

 

[Razkle]

beach till 105! Slow ? not really... and fippy was a pain until my tank got dressed then he is cake...

- - - Updated - - -

little "trick" to fippy. he will stay where he is lead, so if you see him draw him away and park him at the portal, he will stay there, he does not path back to his spot and wont respawn

 

[psimoon]

Thanks for the info Raz, I am got my 3xWizies and tank to 100, now Im PLing the cleric at 'The Beach" (TM), cleric is 91 almost 92. I think they will move to the some snake infested beach front property real soon.

- - - Updated - - -

hmm, DBG must have changed Floppy, I tried twice to move him to an out of the way spot and he moved back to spawn point.

It seems he does not corpse camp or stay anymore.

 

[Dawnrider70]

i like this spot , nice easy kills ... the best type for afk killing.

 

[RedQueen]

Anyone have a mesh file for either MQ2Nav or MQ2Navigate? Lol.

Neither tool will open the zone file. :/

 

[wynge]

This better experience then neriak 3rd gate skellies?

 

[Razkle]

skellies are kos - this strat's strength is nothing is kos and 90% are single pulls

 

[EQStreamz]

I have attempted to access this camp about 6 times in the last week... every single time there has been 3+ groups going to town in here lol. Usually one on each side of the beach and at least 1 group elsewhere. Either there are A LOT more RG "users" who love this spot. I did get close to one of the groups and the entire group gated ...came back about 15 minutes later lol. As popular as this zone seems to be, I have chosen to leave it alone.

It is funny to see how many people use MQ2 now that I recognize the visual tells.

 

[RedQueen]

I have attempted to access this camp about 6 times in the last week... every single time there has been 3+ groups going to town in here lol. Usually one on each side of the beach and at least 1 group elsewhere. Either there are A LOT more RG "users" who love this spot. I did get close to one of the groups and the entire group gated ...came back about 15 minutes later lol. As popular as this zone seems to be, I have chosen to leave it alone.

It is funny to see how many people use MQ2 now that I recognize the visual tells.

LOL i know right! [emoji12]

 

[macroquester]

Anyone have a mesh file for either MQ2Nav or MQ2Navigate? Lol.

Neither tool will open the zone file. :/

Did you get a mesh to work Your Majesty?

I cant seem to get a mesh working in this zone. Even one downloaded from the packs.

is the error message.

as you can see there is a file in the correct place. I cannot create a new mesh. The generator.exe just doesnt want to work in that zone for me.

Any suggestions?

 

[Dead]

Took me some time but I got a mesh to load correctly. Here is the MQ2Nav Beta Mesh. I am not sure I can get the same result with MQ2navigation but I'll give it a shot. This is completely untested, please let me know if it doesnt work.

The problem with why you cant load the zone file is because the MeshGenerator is looking for Chelsith.eqg files and the files are named Chelsithreborn.eqg. I had to rename all of the files in my eq directory for chelsith and then meshgenerator loaded it just fine. Then when I built the mesh it had the wrong Z(Y Axis) and built the mesh on the bottom of the zone never touching the top part. I changed the Min Y to -6.8 and it resulted in meshing the beach without the water and the rest of the zone. This file does not navigate the rooms you port in below the surface.

This file should now work straight from the download. Just make sure to put it in your MQ2Nav folder and see if it works. Like I said, its untested but it should work so let me know.

 

[Sum1]

I was wondering if this would work with the old CoD file... since I think the zone design is identical, right??

 

[Dead]

Sum1, I put a CoDecayb.bin on the other forums post. If you want to test it and let me know if it works

 

[Emerica]

Did this to level some alts. Totally want to share for any interested parties that mq2 nav mesh that was listed here has some flaws. It b lines for the guard area/prison up top so if you are looking for a beach day, pulling with kiss might be easier (at least for me because im nav dumb) with a little edit on what you don't want to pull.

 

[r1pt1de]

Took me some time but I got a mesh to load correctly. Here is the MQ2Nav Beta Mesh. I am not sure I can get the same result with MQ2navigation but I'll give it a shot. This is completely untested, please let me know if it doesnt work.

The problem with why you cant load the zone file is because the MeshGenerator is looking for Chelsith.eqg files and the files are named Chelsithreborn.eqg. I had to rename all of the files in my eq directory for chelsith and then meshgenerator loaded it just fine. Then when I built the mesh it had the wrong Z(Y Axis) and built the mesh on the bottom of the zone never touching the top part. I changed the Min Y to -6.8 and it resulted in meshing the beach without the water and the rest of the zone. This file does not navigate the rooms you port in below the surface.

This file should now work straight from the download. Just make sure to put it in your MQ2Nav folder and see if it works. Like I said, its untested but it should work so let me know.

Kind of a necro, but incase anyone else is trying to load this zone to create their own mesh. Instead of renaming the eqg files, this can be fixed pretty quick by editing the Zones.ini file in your base MQ directory. Find the line that says "Chelsith Reborn=chelsith" and change it to "Chelsith Reborn=chelsithreborn". This will let the mesh generator open the Chelsithreborn.eqg file without renaming it. you will still need to change the Min Y value as Dead stated to get a proper mesh due to all the items that are located far below the main body of the zone.

 

[Zincfling]

ive been trying to run this, and for the most part it goes well, but at some point i always wipe to a double fishermen pull, weird thing is i should be able to take on 2 mobs here, but my tank just sits there watching as they eat up my healer merc, and then proceed to eat the group.