• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Guide - AddClicky Information

Question, unless it is specified in this thread an i missed ut just curious.

PullItem - uses this clicky to pull with. Example: Staff of Viral Flux this setting is for the clicky of the item. However in my question can it just use a Bow? i see my warrior using the bow but he literally uses the bow at close range then after he fires the bow (BEFORE aagro is set) he runs to the target then once aagrro is establishes he runs back. Just wondering if i had missed something regarding the usage of the actual range item, specifically the bow from a distance. Thanks
 
KS1980 said:
Question, unless it is specified in this thread an i missed ut just curious.

PullItem - uses this clicky to pull with. Example: Staff of Viral Flux this setting is for the clicky of the item. However in my question can it just use a Bow? i see my warrior using the bow but he literally uses the bow at close range then after he fires the bow (BEFORE aagro is set) he runs to the target then once aagrro is establishes he runs back. Just wondering if i had missed something regarding the usage of the actual range item, specifically the bow from a distance. Thanks
Click to expand...
Some plugins have a pull ability or pull aa, they all have an option to disable that, in which case they would use their bow/arrow. Or for like war, it doesn't have a pull ability or aa, so it would default to bow.

We nav to a mob until we have line of sight and use our bow on the way to it if we can. We don't roam around for max distance to use it.

There is nothing to add or change, and doesn't have anything to do with add clickies (unless you are using a pull clicky item - which a bow is not)

If he runs to the mob he likely got a eq error about targeting or line of sight before the mob showed up on your Xtarget list - which is an eq thing, especially if you're in a slow zone or shitty server.

TL;DR - you don't add bow to anything, and yes that behavior is expected
 
thx Sic for the information, in relation to this question is there a way to set a delay on the bow attack like maybe 1 second or even 1/2 of that so he just doesnt run to the mob right after he swings his bow? appreciate the assistance.
 
KS1980 said:
thx Sic for the information, in relation to this question is there a way to set a delay on the bow attack like maybe 1 second or even 1/2 of that so he just doesnt run to the mob right after he swings his bow? appreciate the assistance.
Click to expand...
sorry no, i would have said if there was any adjustability
 
I've recently been lvling a group of 6 mages. They are currently lvl 39 (so no AA of any sort) and I really need them to keep the journeyman's boots spell up at all times as the puller tends to show up dead without it. I tried setting Journeyman's Boots to downtime and it never fired. Also tried setting it to SelfHp and it also never fired. Any advice as to what I'm doing wrong?
 
soulmonger said:
I've recently been lvling a group of 6 mages. They are currently lvl 39 (so no AA of any sort) and I really need them to keep the journeyman's boots spell up at all times as the puller tends to show up dead without it. I tried setting Journeyman's Boots to downtime and it never fired. Also tried setting it to SelfHp and it also never fired. Any advice as to what I'm doing wrong?
Click to expand...
you tried putting your boots to selfhp? that isn't going to be a thing. i dunno why that was something you tried, but thanks for letting me know

i dunno why downtime wouldn't work, but if you never have downtime they wouldn't get to fire it. I dunno if i have any toons with that item but i'll take a look. - it is also possible mq2mage doesn't have downtime clickies checked when pulling (in which case i'll fix)

an mq2react would work for this case (but downtime should obviously work)

edit: can you confirm it is JUST the mq2mage puller it is not working on, but they are working on the other toons if you were to have journeyman boots as downtime on those toons
 
The reason for putting them on selfhp is because my puller was getting chewed up on the way back if not having jboots proc up. I was hoping it would at least fire it before the next pull.
 
soulmonger said:
The reason for putting them on selfhp is because my puller was getting chewed up on the way back if not having jboots proc up. I was hoping it would at least fire it before the next pull.
Click to expand...
well it isn't going to stop and try and use clickies while returning with a pull.


can you confirm it is JUST the mq2mage puller it is not working on, but they are working on the other toons if you were to have journeyman boots as downtime on those toons
 
I understand that it wouldn't cause the toon to stop and cast jboots... but the way I understand it is if I came back beat to hell (say 40% hp) and by the end of the fight I lived, but was still hurt (still below 60% hp), then it would fire before resting. Either way I completely understand that ideally this should be set to downtime. My characters definitely have downtime, they pause to med every several pulls.

I do have other characters I can test with, but I'm not sure if I have a non mage character that also has Journeyman's boots. Let me see what I can come up with.
 
I bought some traveler's boots on my cleric and tested this. The cleric was able to activate the tboots during downtime as would be expected.

So I went back to the mage I was using to pull and removed and re added Journeyman's boots as downtime and now it is functioning as expected. I'm not sure what was wrong before, but I thank you very much for your help and I apologize for wasting your time.
 
General question, on mages (using mq2mage) where do yall put your bi-fold focus of the evil eye click, burns or offensive?
 
Sic,

After reading your descriptions at the beginning of the thread,

Offensive - when you are fighting (in melee combat), and we are missing the buff from the item, or your target is missing the buff from the item. This currently doesn't check for slowed% or anything else like that, and since it isn't checking for spell type for usage just "am i missing the buff AND is the mob missing the spell from it" it can and will spam on usage. it doesn't work like we/you want and this is high on the list of things we want to change when we do the aforementioned overhaul.)
Click to expand...

would you recommend adding the SK epic Clicky as Offensive or Downtime. I was going to use Offensive but after reading the comment about items spamming I became confused / senior momement.

Be well. Enjoy the rest of the weekend.
 
Gekko said:
Sic,

After reading your descriptions at the beginning of the thread,



would you recommend adding the SK epic Clicky as Offensive or Downtime. I was going to use Offensive but after reading the comment about items spamming I became confused / senior momement.

Be well. Enjoy the rest of the weekend.
Click to expand...
none. :p

Please check the FAQ for the plugin - if the plugins uses something specific we say so, and output it as an item that we're interested in or have

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

MQ2Eskay FAQ

Q. Epic 1.5/2.0?
A. The 1.5/2.0 are automagically used as part of the combat checks. It checks against your health for "uh oh" usage, and in the tier'd burns for burn usage. No need to add it to anything - unless you want it to be used as an "any time its up" then you would want to add it to combat/burn - just keep in mind you will lose its functionality as part of the tier'd defensive routine and "uh oh" bit if you use it on cooldown.


hope that helps! thanks for the weekend well wishes, you the same
 
Sic said:
none. :p

Please check the FAQ for the plugin - if the plugins uses something specific we say so, and output it as an item that we're interested in or have

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

MQ2Eskay FAQ

Q. Epic 1.5/2.0?
A. The 1.5/2.0 are automagically used as part of the combat checks. It checks against your health for "uh oh" usage, and in the tier'd burns for burn usage. No need to add it to anything - unless you want it to be used as an "any time its up" then you would want to add it to combat/burn - just keep in mind you will lose its functionality as part of the tier'd defensive routine and "uh oh" bit if you use it on cooldown.


hope that helps! thanks for the weekend well wishes, you the same
Click to expand...

Appreciate the guidance, I swear I read all the FAQ’s but seem to always miss something. One quick follow-up please. Will it use it from inventory or does it need to be equipped. When my SK tanks, I have him setup for sword and board, and the epic is 2h, or at higher levels should I switch him tom2h?

Again, thanks for all the help and support.

Be well. Hope the Ravens do well, if you are an NFL fan.
 
Gekko said:
Appreciate the guidance, I swear I read all the FAQ’s but seem to always miss something. One quick follow-up please. Will it use it from inventory or does it need to be equipped. When my SK tanks, I have him setup for sword and board, and the epic is 2h, or at higher levels should I switch him tom2h?

Again, thanks for all the help and support.

Be well. Hope the Ravens do well, if you are an NFL fan.
Click to expand...
Definitely does not need to be equipped, it will use from inventory just fine.
 
Question: Addclicky Offensive

Question

If i have 2 items with 2 different ranks that are added to the addclicky, would it fire the highest version prior to the lowest version? merely asking because if it clicks the lowest version, the highest version would override.

1666934680639.png

thanks
 
KS1980 said:
Question: Addclicky Offensive

Question

If i have 2 items with 2 different ranks that are added to the addclicky, would it fire the highest version prior to the lowest version? merely asking because if it clicks the lowest version, the highest version would override.

View attachment 43148

thanks
Click to expand...
it will check your addclickies in the order you have them listed in your addclickies

so if it is

addclicky0=bite of the 20
addclicky1=bite of the 21

it would check the bite of the 20 first, use that, and then check bite of the 21
 
So, I think I might be doing something wrong. MQ2Rogue, lower level, mid 30s. I have set item Bite of the Shissar IV as a downtime clicky. Not invised, not hiding/sneaking, etc. Have item in inventory....nada. Item ID is 44534. I can cast it myself with no issues. What am I missing?
 
Shadow said:
So, I think I might be doing something wrong. MQ2Rogue, lower level, mid 30s. I have set item Bite of the Shissar IV as a downtime clicky. Not invised, not hiding/sneaking, etc. Have item in inventory....nada. Item ID is 44534. I can cast it myself with no issues. What am I missing?
Click to expand...
No clue. Would have answered on discord if I did.

We check if you have the buff from the item and if it stacks, then we use it if you don't have aggro etc.

You said they used to work, so random guess is something you're doing. (Xtarget/aggro/other buffs)

I'll check some time in the next few days, that item might have some weirdness - but all poisons/potions/clickies are handled the same.

If you're directly editing the ini - don't. Use the slash commands
 
TY Sic, but I think it is fixed. I decided to go hunting, and it still wasn't working, so decided I would try later. It started working after I dinged 4 levels, and re-checked. Buff was up. However, it was not when I checked after 2 level-ups. It was really odd. Both SHM/ROG had the issue, 4 levels gained, working again. I am just that weird.

I always use the slash commands though, habit for CWTN changes. Thanks again!
 
Is there a way to have addclicky downtime make me target the pet when it clicks? Some items have a different effect depending on the target, for example it summons a familiar, or if your pet is the target it will petamorph them. I can do it myself but if there is a way to auto petamorph my pet with it that would be ideal.

Maybe I'm better off just writing a LEM condition for it.
 
r0rb said:
Is there a way to have addclicky downtime make me target the pet when it clicks? Some items have a different effect depending on the target, for example it summons a familiar, or if your pet is the target it will petamorph them. I can do it myself but if there is a way to auto petamorph my pet with it that would be ideal.

Maybe I'm better off just writing a LEM condition for it.
Click to expand...
No
 
whats the requirements for the ManaGroup Clickies to go off. I have my unified pheonix feather added, but it never uses it even when the whole group is below 30% except the shaman
 
question, how do I get my rogue while set to puller/assist to use his Kijarl's Ring of Negation for pulling from a further away distance than melee range? Is that even possible with the plug in? I have it added as a pullitem but he gets right up on the mobs to cast it and that can be bad sometimes. thank you.
 
KMBx5 said:
question, how do I get my rogue while set to puller/assist to use his Kijarl's Ring of Negation for pulling from a further away distance than melee range? Is that even possible with the plug in? I have it added as a pullitem but he gets right up on the mobs to cast it and that can be bad sometimes. thank you.
Click to expand...
we nav to mobs and check for LoS while on the way. if we find LoS while on the way, we use our item/ability/pull-aa --- we don't roam around looking for LoS, so this is likely what you're experiencing
 
Sic said:
we nav to mobs and check for LoS while on the way. if we find LoS while on the way, we use our item/ability/pull-aa --- we don't roam around looking for LoS, so this is likely what you're experiencing
Click to expand...
well, it has a 200 range and I have line of sight on most of the mobs here in that span but he still runs right up to them to cast, no biggie, will just go back to melee pulling, he dies less that way, lol. Thanks again for some awesome plug ins, love them all.
 
Question/Request: Shrink

Woulld it be possible to have a global shrink to shrink group members if you have any targetable shrink click? yes i know that shamans and bst etc can do that but if you have a caster group and just have that option it be great. Thanks
 
KS1980 said:
Question/Request: Shrink

Woulld it be possible to have a global shrink to shrink group members if you have any targetable shrink click? yes i know that shamans and bst etc can do that but if you have a caster group and just have that option it be great. Thanks
Click to expand...
we already do.

and i merged your post into the addclicky post.

Please try and make sure to check before asking for stuff.

ShrinkGroup - shrinks group members (you can add a pet shink in here now and it will use it to shrink your pet, if you have one).
 
Tried adding the 'Symbol of the Overlord' on my warrior just now. Used /war addclicky downtime, but its just spammed casting until I removed the clicky. I'm probably missing a simple fix for this, but it's late and my brain is getting foggy...
Anyone able to point me in the right direction?
 
Durnell said:
Tried adding the 'Symbol of the Overlord' on my warrior just now. Used /war addclicky downtime, but its just spammed casting until I removed the clicky. I'm probably missing a simple fix for this, but it's late and my brain is getting foggy...
Anyone able to point me in the right direction?
Click to expand...
Did you have bard haste on you at the time?
 
Durnell said:
Tried adding the 'Symbol of the Overlord' on my warrior just now. Used /war addclicky downtime, but its just spammed casting until I removed the clicky. I'm probably missing a simple fix for this, but it's late and my brain is getting foggy...
Anyone able to point me in the right direction?
Click to expand...
We check if you have the buff the item says it gives, and if mq says it stacks.
 
Durnell said:
Tried adding the 'Symbol of the Overlord' on my warrior just now. Used /war addclicky downtime, but its just spammed casting until I removed the clicky. I'm probably missing a simple fix for this, but it's late and my brain is getting foggy...
Anyone able to point me in the right direction?
Click to expand...
1677243343986.png
According to Allakhazam this unlocks an alternative advancement ability, this does not provide a buff. You do not want to add this to clickies. You will manually use it once, and then not use it again. The plugin is looking for the buff Ancient Power, and since it's not getting the buff of ancient power, it's just recasting it.
 
Shaman Mount

Not sure whats going on or maybe im doing something. I added "Clicky8=Marble Prowler Saddle|downtime"

the shaman summons the mount then removes the mount then resummons it and rince and repeat.

i have the same mount on all my other casters and none of them are having this behavior. Settings seems right and i dont have the mount or the buff on block buffs.






1677566726143.png

1677566924449.png

thanks
 
KS1980 said:
Not sure whats going on or maybe im doing something. I added "Clicky8=Marble Prowler Saddle|downtime"

the shaman summons the mount then removes the mount then resummons it and rince and repeat.

i have the same mount on all my other casters and none of them are having this behavior. Settings seems right and i dont have the mount or the buff on block buffs.
Click to expand...
Is it possible that you have a better mount blessing and that is causing it to reject and repeat?
 
KS1980 said:
Shaman Mount

Not sure whats going on or maybe im doing something. I added "Clicky8=Marble Prowler Saddle|downtime"

the shaman summons the mount then removes the mount then resummons it and rince and repeat.

i have the same mount on all my other casters and none of them are having this behavior. Settings seems right and i dont have the mount or the buff on block buffs.






View attachment 46701

View attachment 46702

thanks
Click to expand...
check your keyring, if you slapped a different mount in your "always give me this benefit instead" it'll cause something like that.
 
You must log in or register to reply here.
Guide - AddClicky Information
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -