well, what are the clickies?. if you added something that doesn't give the buff it says, like a shrink clicky or added the "shadow of whatever" items that don't give the buff they say they do, then those would not be correct for downtime.
-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
Guide - AddClicky Information
- Thread starter Sic
- Start date
couple of things about them.
1: they don't actually give you anything. they unlock AAs
2: they don't give the buffs that they say they do, they unlock AAs
3: addlicky is "am i missing the buff that this item says it gives, and does that buff stack with me, if so click it"
3b: since it doesn't give the buff it says it gives, it is going to continue to try and recast it until you have the buff the item says it gives
> Check Here for previous discussion about them <
> or here <
if you were just looking to keep up as a "fluff" buff, you would need to use something like mq2react to click your item
> here <
yep, that is what I typed in the patch notes.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
I would need a specific item name to know. But my first question is always "Have you tried it yet"? Because that's 100% the best way to find out what happens.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
If you're referencing Ice Bound Ulthork - https://everquest.allakhazam.com/db/item.html?item=139991
It should be pretty straight forward. Should just use it if you need it.
No need to block the actual familiar, can just use the keyring to autokill familiars.
It should be pretty straight forward. Should just use it if you need it.
No need to block the actual familiar, can just use the keyring to autokill familiars.
yes - been handled a long while.
you would downtime clicky it
autoleave in familiar keyring if you want your familiar to auto leave.
it is a built in thing - no purchase or anything needed for the purposes of "auto-dismiss familiar
i responded the moment you mentioned it yesterdayWe actually already handle things that give your pet buffs (added in december of 2020), like chest or epic clicky. so it should work, and while i don't have mine, i've spoken to a few that use it in offensive and they report it works.
I would actually *not* use the bl epic as mentioned in the FAQ
from mq2bst FAQ
Q. Do I need to add my epic 1.5/2.0 to addclicky?
A. Bst is one of the classes we don't automatically use your epic 1.5/2.0 - there are a bunch of debates as to whether or not it actually hinders a roll for your pet to proc a stun, and at "current game" the benefit of the 1.5/2.0 is pretty minimal as is, and isn't worth taking up a "roll for a stun proc". But if you did want to use it you would add it to addclicky offensive or burn.
and obligatory "you should consider moving to 'next'" as mq2 has had several issues over the past few weeks with items
tho it appears it is a pet2 spell and we're only checking pet - so i dunno how stuff "worked" for those that i've spoken to, as by the code it should have issues since it isn't checking pet2
If you swap to next i can send you something to test, otherwise you're going to have to wait until rebuilds happen
Is there a way to do a (Mag for example, but would also use for SHM/CLR) /mag addclicky downtime itemID or /mag removeclicky downtime itemID ?
Looking for a way to enable/disable mounting by command, mostly because Muramite Proving Grounds is reporting itself as a mountable zone, but it will not allow mounts.
Looking for a way to enable/disable mounting by command, mostly because Muramite Proving Grounds is reporting itself as a mountable zone, but it will not allow mounts.
that particular weird issue is fixed for next update.
but no, you need to pick up the item to add/remove it
Attempting to add Aspect of the Brood, however after holding the item on cursor and using the /Clr AddClicky downtime command, it displays the item as Aspect of the Broodstone (and never fires) when queried with a /Clr ShowClickies
Any chance this can be fixed?
Any chance this can be fixed?
Last edited:
Part of the clicky probably doesn't stack with something else you have, so we avoid using it more than likely. there are some illusion clickies like that
- Joined
- Aug 26, 2015
- RedCents
- 420¢
I can tell you from experience that Aspect of the Brood will not fire if you are in too much of a crowded space. Need to have ample Z-axis room.
Some zones (dungeon crawls) will not let you fire it at all.
In addition to all this, you can't shrink this dragon illusion.
Depending on where you are in a zone, if you are in a state of Downtime, it very likely will not fire without the Z-axis room - IF you are able to successfully add it to the downtime list.
I'm curious about this- will test around with it a little. I only have been using this click manually.
~TheFiddler~
- Joined
- Aug 19, 2020
- RedCents
- 30,704¢
BST and SHM can shrink it. I have never had a issue with it firing, however I manual use it. Same as giant ass spider one~
no, our addclicky will not check your zaxis before trying to use it.
is it almost certainly what i said
there are some other items that cause issues like this > here <
Last edited:
blahblahblah
Active member
- Joined
- Jun 19, 2020
- RedCents
- 86¢
I set all mine to Downtime, so when most of the bots are awaiting the Sk to pull things, there clicking theses, and before the SK goes and pulls, to test, click on off, it will re-click, and go about her business...except for Breastplates...those to burns.
Works very well for me.
Works very well for me.
yeah for sure, likely in this case, it is due to the item itself and what we see as "stackable". so there are a few items like the link above where it wouldn't addclicky use them
which my point was that jester is likely a: not doing anything wrong and b: not confused about how it "should" work just that due to how some items work, and such, we will err on the side of not clicking them
- Joined
- Oct 18, 2013
- RedCents
- 2,776¢
It used to be that a downtime clicky buff wouldn't try to recast if the offending blocking buff was still on. But instead of medding the characters now sit/spam click over and over.
Please post your addclicky questions in the addclicky thread.
we still do, we haven't stopped checking, and spell data hasn't changed for them either.
you should consider using them under different circumstances if you're having issues
i still use both in my clickies for all my toons and i don't have any problems, but i don't use them in downtime.
this is what mq reports
Also i just added mine to downtime to try and replicate
here is me using phoenix featuer
had to click off phoenix feather to get it to try and cast horn
I even have some fancy stuff for these types of items where we also check that we don't have the aura around us, not just the buff, before trying to cast
are you sure you don't have a bad react or macro or something trying to fire them, because i can't replicate it
we still do, we haven't stopped checking, and spell data hasn't changed for them either.
you should consider using them under different circumstances if you're having issues
i still use both in my clickies for all my toons and i don't have any problems, but i don't use them in downtime.
this is what mq reports
Also i just added mine to downtime to try and replicate
here is me using phoenix featuer
had to click off phoenix feather to get it to try and cast horn
I even have some fancy stuff for these types of items where we also check that we don't have the aura around us, not just the buff, before trying to cast
are you sure you don't have a bad react or macro or something trying to fire them, because i can't replicate it
Last edited:
also - if you are using legacy, you shouldn't
you also don't have any current cwtn licenses? and don't appear to have any since march and april last year? (and haven't downloaded since then)
are you sure you meant to post in the cwtn section for the cwtn plugins? and you're not asking for one of the other automation suites or mq2react or something?
darkfurlord
Member
- Joined
- Jul 31, 2016
- RedCents
- 28¢
Is there a way to add rezz tokens?
- Joined
- Aug 19, 2020
- RedCents
- 30,704¢
No. if you go back about 4 pages Sic explains. 
Where would be an appropriate place to use a necromantic dragon bone life tap click if I want to use it as a heal? For KA and class plug? I know there are heal sections in both, but will it know to nuke something with it and not try and click with no valid targets?
...
Healthclicky to use an item when you want it to cast a heal, it is just going to click the item. Not target around.
This is for cwtn plugins not kiss, so this will not work for kiss
If you want alternative you can check mq2react.
I don't suspect that item is going to be the difference between living and dying
- Joined
- Apr 4, 2020
- RedCents
- 898¢
First thanks for the great products and the updates you all do as able to make things ever more user friendly.
Regarding the clicky feature, there is an issue with familiars if you have someone or yourself targeted it will not cast the familiar (having this issue currently with the personal hemic source), and just spam it in the output window. As soon as you clear target it casts fine. Is it possible for you to put a clear prior to casting those? Obviously I can just make a hotbutton to clear it if not. Thanks in advance for your consideration.
Regarding the clicky feature, there is an issue with familiars if you have someone or yourself targeted it will not cast the familiar (having this issue currently with the personal hemic source), and just spam it in the output window. As soon as you clear target it casts fine. Is it possible for you to put a clear prior to casting those? Obviously I can just make a hotbutton to clear it if not. Thanks in advance for your consideration.
I'm not familiar with an issue like that, but I'll take a look at it when I have a chance.
- Joined
- Apr 4, 2020
- RedCents
- 898¢
It could only be the TOL, I have not tried it with any others but the TOL familiar to be fair.