Config - 120 Bard - Based Sic bard ini - built in more DPS for longer fights and Missions

[jableakley]

jableakley submitted a new resource:

120 Bard - TOL 120 Bard with clickies

[General]
KissAssistVer=12.002
TwistOn=1
TwistMed=11
TwistWhat=11 7 1 6
XTSlot=1
Role=assist
CampRadius=60
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedCombat=0
LootOn=0
RezAcceptOn=1|90
AcceptInvitesOn=1
GroupWatchOn=0
EQBCOn=1
IRCOn=0
CampfireOn=0
CharInfo=Bard|120|GOLD
DPSMeter=0
ScatterOn=0
MedStop=100
GroupWatchCheck=FALSE
DanNetOn=0
DanNetDelay=20
CorpseRecoveryOn=0
TwistMed=Mana song gem
TwistWhat=Twist order here
LOSBeforeCombat=0

[Buffs]...

Read more about this resource...

 

[Sic]

i approved your ini, this appears to just be an incomplete and missing-updates copy of mine with a couple of different clickies

 

[jableakley]

You are exaclty correct SIC just updated it from you 115 and then into 120. I adjust the one you did so the bard does a lot more DPS in longer fights and on missions. Also the MEZ section I need to update for the Mez songs that are 120 and I need to replace Nightfall with Diabo for single target mez

 

[Deleted member 241925]

What kind of DPS does this get on average vs the original sic bard?

 

[Sic]

What kind of DPS does this get on average vs the original sic bard?

well my sic bard isn't made for dps, i don't want my bard on kiss to use dots at all. so yeah, using dots is going to be more dps

 

[Deleted member 241925]

well my sic bard isn't made for dps, i don't want my bard on kiss to use dots at all. so yeah, using dots is going to be more dps

I guess I was looking for a base line of what his changes add. I get around 150K-175K DPS using your macro atm. I am wondering where this lies.

 

[Sic]

I guess I was looking for a base line of what his changes add. I get around 150K-175K DPS using your macro atm. I am wondering where this lies.

a lot more than that probably lol

using dots on my bard is more than double that

 

[BlankStare]

Why is this using scorpion agony (which you have twice btw) poisons? Are you trying to tank on the bard?

 

[Sic]

Why is this using scorpion agony (which you have twice btw) poisons? Are you trying to tank on the bard?

maybe i am.

double the pleasure double the fun

if you don't like it don't use it

(but no, not using agony on my bard, dunno why it is here)

I don't use kiss, i just keep my inis updated because i get a lot of requests for them. and a good chunk of people just take mine and then make a couple of change and upload it anyhow, so it is often a good starting point for people.

I also specifically don't use dots in kiss on a bard

 

[JerkChicken]

I don't use kiss, i just keep my inis updated because i get a lot of requests for them. and a good chunk of people just take mine and then make a couple of change and upload it anyhow, so it is often a good starting point for people.

Hmmm.... If you do not use kiss for your bard, and there is no MQ2Bard....
I knew it! Sic used RGMercs!

 

[jableakley]

I have scorpions agony because my group has a rogue and I had over 5000 of those gormars so easy for me to make. Everyone that melee's buffs a poison and I have my rogue use Coallition. DPS on bard macro for me is around 350k have had up to 900k on full burns. My warrior does not lose agro over this. If you want to use another poison feel free to change it. This macro I altered from SiC's baseline bard because I main a bard and raid on a bard. I am no macro guru by any means. That being said, I wanted to utilize more of the clickies that my bard has and dig in with the dps. I have a lot of friends using it and they asked me to post it up. Fair warning, The mez section is by default set to off in this version. Also in using dots there is odd occassion at the end of a fight the bard will have targeted self and the dot was still rolling and there is the possibility of death by self DOT. Last note to get the most out of your DPS the bard will need to have all the dot focuses done in AA

 

[Cannonballdex]

This should be looked at in the bottom of the ini.

KissAssistVer=11.005
Role=Assist
CampRadius=100
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedCombat=0
LootOn=0
RezAcceptOn=1|90
AcceptInvitesOn=1
GroupWatchOn=0
GroupWatchCheck=FALSE
EQBCOn=0
DanNetOn=0
DanNetDelay=20
IRCOn=0
CampfireOn=0
CharInfo=Bard|115|GOLD
DPSMeter=1
ScatterOn=0
TwistOn=0
TwistMed=Mana song gem
TwistWhat=Twist order here
[PullAdvanced]
PullLocsOn=0

 

[jayah]

well my sic bard isn't made for dps, i don't want my bard on kiss to use dots at all. so yeah, using dots is going to be more dps

How do you deal with ${Target.Named} in conditions since most trash mobs will be seen as named?

 

[Sic]

How do you deal with ${Target.Named} in conditions since most trash mobs will be seen as named?

if you use spawnmaster that has a TLO you can use instead

 

[jayah]

if you use spawnmaster that has a TLO you can use instead

Not understanding the answer ... so you may have to explain in detail or very slow .. or both.

Just using this ini as an example but would apply for all conditions I use while using KISS.

The problem is using ${Target.Named} in BURN sections and in events and reacts, Lua etc.

How is that going to help when using kissassist conditions such as:


Cond1=${Target.Named} && !${Me.Song[${Spell[Composite Psalm of Potential].RankName}].ID}

Cond2=${Target.Named} && !${Me.Song[Masterful Phrygian Root].ID} && !${Me.Song[Masterful Phrygian Third].ID} && !${Me.Song[Masterful Phrygian Fifth].ID} && !${Me.Song[Masterful Phrygian Octave].ID}

Cond3=${Target.Named} && ${Target.BuffsPopulated} && !${Target.Buff[Boastful Bellow].ID}

Cond6=!${Target.Named}

Cond8=${Target.Named}

Cond18=${Me.XTarget} > 2 || ${Target.Named}

 

[Sic]

Not understanding the answer ... so you may have to explain in detail or very slow .. or both.

Just using this ini as an example but would apply for all conditions I use while using KISS.

The problem is using ${Target.Named} in BURN sections and in events and reacts, lua etc.

How is that going to help when using kissassist conditions such as:


Cond1=${Target.Named} && !${Me.Song[${Spell[Composite Psalm of Potential].RankName}].ID}

Cond2=${Target.Named} && !${Me.Song[Masterful Phrygian Root].ID} && !${Me.Song[Masterful Phrygian Third].ID} && !${Me.Song[Masterful Phrygian Fifth].ID} && !${Me.Song[Masterful Phrygian Octave].ID}

Cond3=${Target.Named} && ${Target.BuffsPopulated} && !${Target.Buff[Boastful Bellow].ID}

Cond6=!${Target.Named}

Cond8=${Target.Named}

Cond18=${Me.XTarget} > 2 || ${Target.Named}

>>> MQ2SpawnMaster <<<

has a TLO in next called "HasTarget" so you could use ${SpawnMaster.HasTarget} instead of ${Target.Named}

and if your target matches a named, or a mob you've identified as named in your spawnmaster, return true for that condition check

 

[jayah]

>>> MQ2SpawnMaster <<<

has a TLO in next called "HasTarget" so you could use ${SpawnMaster.HasTarget} instead of ${Target.Named}

and if your target matches a named, or a mob you've identified as named in your spawnmaster, return true for that condition check

Will give it a shot.... Thank You!

 

[Draekin]

jableakley submitted a new resource:

120 Bard - TOL 120 Bard with clickies



Read more about this resource...

Question? why are you repeating yjr command and info at the bottom? I was looking at ini and it is reapeating a whole section at the top and then again at the bottom or end of the ini. ie: at the top you have geneal as you start and then near the bottom you have genral again quit a few line that repeat the same line as on the top or begining! I am I missing something that require those lines to be repeated? Just open the ini in its entirity ?