Vanilla - Very Vanilla Compile 20150930 - KISS 8.4!!

[Maskoi]

Very Vanilla Compile 20150925

HUG YOUR MQ2 DEV

[TABLE="width: 600, align: left"]
[TR]
[TD="align: center"]Check out this Month's Poll

[/TD]
[TD="align: center"]Check out this
Month's Contest
[/TD]
[TD="align: center"][/TD]
[/TR]
[/TABLE]
​

NOTES


AAs not casting in macros resolved.
KissAssist 8.4 Released!! see post below for details


New version: RGUpdate 1.3 Download Here

• Fixed settings, will now remember your loaded plugins.
• Will continue to read old MacroQuest.ini files, and upon saving will update to the new format.

Lost?
Watch our easy MQ2 install video, featuring the RedGuides Updater



(Click here to download the RedGuides Updater)

The simple & powerful all-class macro, KissAssist 8 is included in this compile

Instructions

1. Use the Patchme command to bypass the SOE Launcher
2. Download the Very Vanilla compile zip file at the bottom of this post.
3. Download the RGUpdater.
4. Use the RGUpdater to update your MacroQuest files. Instructions are here.
5. Run MacroQuest2.exe from that folder
6. Run EverQuest.exe
7. In-Game, type "/plugin <plugin name>" to add all plugins you wish to use
8. Click Here for Plugin Commands/Descriptions.

--09/24/2015--
More fixes for last patch

• If EverQuest crashes when trying to log in, make sure you're using the newest RGUpdater.
• If you're using Internet Explorer and having issues with "attachment.php" or Smartscreen Filter please read here. Or just use any other browser.

 

[Maskoi]

KissAssist v8.4.0 Updated 09/30/2015 - MAJOR MAINTENANCE RELEASE

Treehuggindruid, KissAssistant #1 was able to pop in long enough to improve our Cure Feature
CURES
You can define debuff types for cures with a new tag by Corruption, Curse, Disease, Poison
Syntax: Cure1=AA/Spell/Disc/Item|Debuff Type
Leaving the tag off will try to cue any debuff same as before
Cure slots increased from 3 to 5

[Cures]
CuresOn=1
Cures1=Radiant Cure
Cures2=Unblemished Blood|Poison
Cures3=Remove Curse|Curse
Cures4=Ward of Purity|Corruption
Cures5=NULL

Maskoi
KissAssist will ignore Eyes of Tallon and Zomm cast by assholes trying fuck with people on TLP servers.

Maskoi and Ctaylor22, KissAssistant #2
Mez Feature major revamp and streamlining.
Fixed MezRadar not removing mobs from Mez array. Mez will now keep track of mezzed mobs correctly.
Kiss will now attempt to immediately remez mobs if mez is broken unless its by the MA
Ae Mez mob count will now only count mobs within MezRadius=
AE Mez will no longer try to mez mobs outside of the MezRadius=

Ctaylor22, KissAssist #2. Thanks! KissAssist 8.4 would not have happened without his contributions

PULL
Ctaylor has rewritten the Pull and Validate mob routines. They now rely heavily on the Spawn TLO. This makes KissAssist even safer since tageting unessacary mobs has been greatly decreased.
Pull routine adjusted to for incoming changes to MacroQuest2 targeting.
Fixed Pulling to use camp X,Y for pulling mobs increasing accuracy in all pull modes except Hunter.
Fixed Pullwith issue when pulling with a Ranged item. Added back in. - As reported 52 times by Razkle
Some minor adjustments and fixes to chain pulling.

Tanking/Assist
Fixed targeting mobs wandering out of camp at low health.
Improved Tank's attacking closest mob when multiple mobs are incoming
Mob Radar now correctly keeps track of mobs

BUFFS
Fixed new item buffs converted to AAs blocking spells.

DPS
KissAssist will no longer try to recast spell with the |Once tag when resisted.
Legacy code removed that was redundant.

Pets
MoveWhenHit fixed

 

[PCDood]

I'm having a problem with my puller (war, with arrows). It works for the first round of pulls upon activating KA; however, after that, I get a message that I cannot see the mob. Even when there are re-pops, he won't target the closest mobs. If I click on a close range mob, then he will resume pulling. Is there a setting I need to change?

 

[ctaylor22]

I'm having a problem with my puller (war, with arrows). It works for the first round of pulls upon activating KA; however, after that, I get a message that I cannot see the mob. Even when there are re-pops, he won't target the closest mobs. If I click on a close range mob, then he will resume pulling. Is there a setting I need to change?

Is the puller pulling all available mobs and then waiting for respawns, or pulling just 1 mob and not pulling the rest?

 

[PCDood]

He's pulling all mobs in the camp, then on respawn he was trying to pull a mob that he could not see. When I changed the pull-radius to 1000 from 500, it seemed to have fixed the issue.

- - - Updated - - -

There does still seem to be a problem with him engaging the mob. Most mobs are fine; however, every now and again, he won't engage the mob upon pulling

 

[Meistro]

Having similar issue with mine. SK set to pullertank. Will pull first round of mobs in Pull radius, then stops. Will not target or pull respawns.. and respawns start showing up before 1st set arwe totally dead. Even had trouble getting him to start pulling after restarting KA a couple times. If i target a close mob (sometimes I need to cast on 1st mob) he will start again, killing all spawns in pull area, but wont kill the respawns...
No issue so far with engaging once pulls have started to attacking adds in camp even if they are mezed.

- - - Updated - - -

If mobs "wander" into Pull area, He will engage those if he hasn't stalled yet, but once he stalled.. it takes a manual push to get him started again (in a non-agro area, so don't know what would happen if a mob agroed the group after he stalls).

 

[ctaylor22]

Could be something going on with the alert list

I need a debug listing of when this is happening so I can try and trace down where this is happening. Just PM me the log if you can.

 

[Meistro]

Ok, sorry didn't get a debug yet.. After about the 10th or so time restarting him, My puller has now successful cycles thru 3 respawns without stalling...still watching..

do you want me to start debug now or when it stalls??

- - - Updated - - -

5 cycles..still pulling. ....

 

[ctaylor22]

when it stalls.

 

[mckonz]

I cant get kiss to work it loads but then it says version mismatch detected and none of the plugins are detected any ideas?

 

[TheTsr69]

New version: RGUpdate 1.3 Download Here

or

extract all to a fresh folder and try - also make sure to run as Administrator.

 

[Razkle]

Fixed Pullwith issue when pulling with a Ranged item. Added back in. - As reported 52 times by Razkle

Dude, I am now famous! hehehe seriously though, thanks for fixing it!

 

[Anavar]

We are having all sorts of issues with the new 8.4

Our Enchanter spam buffs Alacrity on the MT, and forgets to rebuff breeze/clarity.

I'm sure you all know about the Hunter and how it's kind of "broken" where it targets mobs and doesn't really do much with them.

Will update if we find more. We know this is a work in progress. We are on TLP.

 

[Maskoi]

Download 8.4.1
http://www.redguides.com/community/showthread.php/35247-KissAssist-v8-4-1-Updated-10-04-201

 

[Anavar]

Thanks man!

Much improvement noticed on our end!!

 

[aadder]

When I do hunter mode it says searching for the closest mob then after that it doesn't do anything.

[General]
KissAssistVer=8.4.1
Role=Assist
CampRadius=30
CampRadiusExceed=600
ReturnToCamp=0
ChaseAssist=1
ChaseDistance=25
MedOn=1
MedStart=25
MedCombat=0
LootOn=0
RezAcceptOn=1
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=1
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0
[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist
[Buffs]
BuffsOn=1
Buffs1=lizardscale plated girdle|dual|twitching speed
Buffs2=NULL
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=master's aura|aura
Buffs7=NULL
Buffs8=breather|end|19
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
ChecKBuffsTimer=20
[Melee]
AssistAt=99
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=loose
AutoFireOn=0
[AE]
AEOn=1
AERadius=50
AE1=terrorpalm discipline|3
AE2=infusion of thunder|3
AE3=fundament: second spire of the sensei|3
AE4=speed focus discipline|3
AE5=NULL
[DPS]
DPSOn=1
DPSSkip=5
DPSInterval=2
DPS1=banestrike|99
DPS2=NULL
DPS3=zalikor's fang rk. ii|96
DPS4=doomwalker's synergy|99
DPS5=stunning kick|95
DPS6=darkwater soulforge chestwraps|96
DPS7=two-finger wasp touch|99
DPS8=eye of the storm|98
DPS9=NULL
DPS10=torrent of fists rk. III|99
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
[Aggro]
AggroOn=1
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0
[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL
Cures4=NULL
Cures5=NULL
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=1
Burn1=Infusion Thunder
Burn2=Eagle's Balance
Burn3=Zan Fi Whistle
Burn4=Second Spire
Burn5=Destructive Force
Burn6=Ironfist Discipline Rk. II
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
[Pull]
PullWith=Fiercehand Shroud of the Focused|dual|Silent Disturbance
MaxRadius=600
MaxZRange=30
PullWait=0
PullRoleToggle=0
ChainPull=1
ChainPullHP=90
ChainPullPause=30|2
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=1
AFKGMAction=4
AFKPCRadius=400
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=1
MercAssistAt=97

 

[Maskoi]

Your pullwith is goofy. Dual is not supported,

PullWith=Fiercehand Shroud of the Focused|dual|Silent Disturbance

Try just

PullWith=Fiercehand Shroud of the Focused

 

[aadder]

I did the change that you asked. /mac kissassist hunter might go looking for a mob one time then it stops. Not sure how to create a log via /debugpull or whatever. Thanks in advance for the help.

 

[riot]

Try turning chainpull off. You cant chain pull when tanking so that might be bugging out the macro.