Problem - Small error on Beastlord 10

[proutos]

Hello all, first im totally new to MQ2, just started less than 48 hours ago. My group are all lvl 9 for now. I downloaded all the Almar lvl 10 for my team. I think the beastlord have a tiny problem. He doesnt stop to cast sense animals . I will manually remove it but it is in Almar "macro". Also, my wizard, hum do absolutly nothing if i dont take it manually. Put the paladin as a puller but he pull slowly, i dont know what to modify to make it faster and for my team to assist faster too, they wait too long before doing anything. Maybe it is normal higher lvl but at 10, lets go and hit all . Will have to understand what line do what.
Today, my Pal refuse to pull completly. Yesterday he did not had Yaulp memmed but today, he have it so he Yaulp to 0 mana than med lol... I removed it manually. He do nothing, even if i pull, no one do nothing ARGGG lol. I dont know what is the problem. They buff like mad and do nothing! At least, they will be max in magic and med...

P.S. Sorry for my english.

 

[eqtrader74]

Congrats on getting Vanilla installed and KA running on your group!

Hmm yeah not as many people use KA at the lowest levels, so there could be some bugs in Almar's ini's that haven't been noticed or removed.

BST 10 - remove sense animals. I think that just spins you in the direction of the nearest animal mob, it's not a buff. So KA would keep casting it to try to make a "sense animals" named buff appear in your buff window.

Buffs2=NULL

WIZ 10 - Not sure, it doesn't even buff? Doesn't do any DPS? You have the shock of ice spell and it's loading in spell slot 1? KA should be casting that on mobs. You can check this entry in Melee too for an engage start %. Maybe post your whole wiz ini as you're using it.

[Melee]
AssistAt=99

PAL 10 - Hard to say what's causing the delay in pulling. Does the MQ2 window give you any messages while it is waiting to pull? Is the pally trying to buff? Or "Medding until 100%?" Or it says "waiting for mobs" or something else? Again you may have to post your whole ini in case there is a setting off that we can spot.

 

[proutos]

Hello,damn, when i started sooner, EVERYTHING was fine, i was SOOOO HAPPY than i ended macro on all to go buy spells, we are all lvl 11 now. I tried to restart, the Pal refuse to pull.... Ok, here what im doing:
1 start EQBC server
2- Load all my team
3 inviting them and i did not found how to groupe them all using 1 click but i manually do it lol.
4 playing my pal, i target myself and mimic on than i type: /bca //mac kissassist
5 still having me targetted, /mac kissassist manual
6 /buffson until it goes off because courage overwrite druid spells and druid spells overwrite courage so they go OOM doing this....
7 set Pal as MT MA and Puller.

Pal ini:
[General]
KissAssistVer=11.004
XTSlot=0
Role=Puller
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedCombat=0
LootOn=0
RezAcceptOn=1|90
AcceptInvitesOn=1
GroupWatchOn=0
CastingInterruptOn=0
EQBCOn=0
IRCOn=0
MiscGem=8
MiscGemLW=0
MiscGemRemem=1
CampfireOn=0
CharInfo=Paladin|11|FREE
DefaultUI=TRUE
DPSMeter=1
ScatterOn=0
[SpellSet]
LoadSpellSet=2
SpellSetName=KissAssist
[Buffs]
BuffsOn=1
BuffsSize=20
Buffs1=Courage
Buffs2=NULL
RebuffOn=1
CheckBuffsTimer=10
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
PowerSource=NULL
[DPS]
DPSOn=1
DPSSize=20
DPSSkip=0
DPSInterval=2
DPS1=Cease|99
DebuffAllOn=0
DPS2=NULL
DPS3=NULL
DPS4=NULL
DPS5=NULL
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
DPS16=NULL
DPS17=NULL
DPS18=NULL
DPS19=NULL
DPS20=NULL
[Heals]
HealsOn=1
HealsSize=15
Heals1=Minor Healing|20
AutoRezOn=0
AutoRezWith=Your Rez Item/AA/Spell
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
Heals6=NULL
Heals7=NULL
Heals8=NULL
Heals9=NULL
Heals10=NULL
Heals11=NULL
Heals12=NULL
Heals13=NULL
Heals14=NULL
Heals15=NULL
XTarHeal=0
XTarHealList=Xtar slots here Example: 5|6|7
HealGroupPetsOn=0
AutoRez1=Your Primary Rez Item/AA/Spell
AutoRez2=Your Secondary Rez Item/AA/Spell
AutoRez3=Your Third Rez Item/AA/Spell
[Burn]
BurnSize=15
BurnAllNamed=0
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
UseTribute=0
[GoM]
GoMSize=3
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSpell1=NULL
GoMSpell2=NULL
GoMSpell3=NULL
[MySpells]
Gem1=Minor Healing
Gem2=Courage
Gem3=Cease
Gem4=Yaulp
Gem5=NULL
Gem6=NULL
Gem7=NULL
Gem8=NULL
Gem9=NULL
Gem10=NULL
Gem11=NULL
Gem12=NULL
Gem13=NULL
[Melee]
AssistAt=95
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0
UseMQ2Melee=1
TargetSwitchingOn=0
[GMail]
GMailHelp=Events currently support - Dead,Drag,GM,Level,Named,Leftgroup,Tells
GMailOn=0
GMailSize=5
GMail1=NULL
GMail2=NULL
GMail3=NULL
GMail4=NULL
GMail5=NULL
[AE]
AEOn=0
AESize=10
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
AE6=NULL
AE7=NULL
AE8=NULL
AE9=NULL
AE10=NULL
[Aggro]
AggroOn=1
AggroSize=10
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
Aggro4=NULL
Aggro5=NULL
Aggro6=NULL
Aggro7=NULL
Aggro8=NULL
Aggro9=NULL
Aggro10=NULL
[Cures]
CuresOn=0
CuresSize=5
Cures1=NULL
Cures2=NULL
Cures3=NULL
Cures4=NULL
Cures5=NULL
[Pull]
PullWith=Melee
PullMeleeStick=0
MaxRadius=350
MaxZRange=50
UseWayPointZ=0
PullWait=1
PullRadiusToUse=90
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2
PullPause=30|2
PullLevel=8|20
PullArcWidth=0
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=1
AFKGMAction=1
AFKPCRadius=500
CampOnDeath=0
ClickBacktoCamp=0
[KConditions]
ConOn=0
CondSize=5
Cond1=TRUE
Cond2=TRUE
Cond3=TRUE
Cond4=TRUE
Cond5=TRUE
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92
[KissError]
LastCMD:=/endmacro
ErrorDateTime:=07/04/2019 20:37:17
ErrorMsg:=Couldn't open macro file: H:\everquest\uifiles\default\Release\Macros\assist.mac
DataError:=NULL
SyntaxError:=NULL
RunningTime:=8708729
BuildDate:=20190622
CurrentUI:=Default

 

[Akatora]

are you not doing /mac kissassist pullertank on your pally? try it

just make a hotkey called invite and do /invite playername

for the accept i use eqbc so its /bcaa //keypress ctrl+i as a hotkey

 

[Sum1]

are you not doing /mac kissassist pullertank on your pally? try it

just make a hotkey called invite and do /invite playername

for the accept i use eqbc so its /bcaa //keypress ctrl+i as a hotkey

You can also configure MQ2AutoAccept to just accept group and raid invites, as well as trade stuff.

 

[eqtrader74]

Yeah I'd set the pally's role to PullerTank or start their KA with the version Akatora mentioned. Then they will pull and tank the mob or handle adds.

In your pally [Pull] section, double check these settings:

MaxRadius=350
MaxZRange=50

PullWait=1
PullLevel=8|20

Are there mobs within 350 units? (Check the blue circle on your map for pull radius once you start the pally.) And within +/-50 units of z-range up or down? Are those mobs between levels 8 to 20? PullWait is a timer in seconds to pause if no mobs are found, before looking again. I'd set this to 10 to 15, you don't need to check for respawns every second.

If all of the above are good and mobs are within those levels/distances, then check your KissAssist_info.ini in your Macros folder. See if the entry for the zone you're in has any restrictions on MobsToPull or MobsToIgnore. Adjust those back to defaults it needed.

Turn off the HP buff in either the druid or the pally ini. The buff section will just look for the exact named buff on each toon and recast if it doesn't see it. It doesn't innately understand stacking or overwriting. Once you're more comfortable with your KA ini stuff, you can write a code condition on the druid that would check for something like "if I'm missing Courage buff, cast the druid HP buff" cond1=!${Me.Buff[Courage].ID}

Then I'd head over to the KissAssist faq & settings page too. This has info on what all those entries in the ini do and what settings are available. It doesn't cover conditions, but don't worry about those for now.

You can use the plugin mentioned above to build your group. I use a EQBC hotkey series on my group leader:

/invite Gandalf
/invite Frodo
/invite Bilbo

Then 2nd hotkey for all to accept:

/bca //invite

 

[proutos]

Will test all that, thx for everything .
Here is my kissassist_info.ini, do i need to write mobs i want to pull ingore manually here or is there a list somewhere to not pull a guard lol?
[The Mines of Gloomingdeep]
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToPull=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or ALL for all mobs
MobsToIgnore=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToBurn=List up to 10 mobs. Use full names i.e. Beget Cube,Helias,Raze or NULL
PullPath=Place holder for path file. Not yet impletmented.
[Crescent Reach]
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToPull=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or ALL for all mobs
MobsToIgnore=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToBurn=List up to 10 mobs. Use full names i.e. Beget Cube,Helias,Raze or NULL
PullPath=Place holder for path file. Not yet impletmented.

EDIT: WOW, it work VERY WELL . Just one thing lol, can he stop pulling when evryone have 0 mana? ;p Or when he have 40% HP because no one have mana to heal him including himself lol.
And BTW, if you can see in this why my druid dont Damage shield my tank, it would be great
[Buffs]
BuffsOn=1
BuffsSize=20
Buffs1=Skin like Rock
Buffs2=Dance of the Fireflies|Summon|Summoned: Firefly Globe
Buffs3=Thistlecoat
Buffs4=Shield of Blades|MA
RebuffOn=1
CheckBuffsTimer=10
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL

 

[Akatora]

You can also configure MQ2AutoAccept to just accept group and raid invites, as well as trade stuff.

ive done that and for some reason it just hasnt worked for me. so I created a hotkey lol

 

[Akatora]

Will test all that, thx for everything .
Here is my kissassist_info.ini, do i need to write mobs i want to pull ingore manually here or is there a list somewhere to not pull a guard lol?
[The Mines of Gloomingdeep]
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToPull=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or ALL for all mobs
MobsToIgnore=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToBurn=List up to 10 mobs. Use full names i.e. Beget Cube,Helias,Raze or NULL
PullPath=Place holder for path file. Not yet impletmented.
[Crescent Reach]
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToPull=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or ALL for all mobs
MobsToIgnore=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
MobsToBurn=List up to 10 mobs. Use full names i.e. Beget Cube,Helias,Raze or NULL
PullPath=Place holder for path file. Not yet impletmented.

EDIT: WOW, it work VERY WELL . Just one thing lol, can he stop pulling when evryone have 0 mana? ;p Or when he have 40% HP because no one have mana to heal him including himself lol.

turn med and put what number you want it at and groupwatch on that should fix that

 

[Sum1]

ive done that and for some reason it just hasnt worked for me. so I created a hotkey lol

Have to configure it and turn it on on all the toons. It can be fickle, but once it’s working it’s awesome.