Problem - PullerPetTank Not Pulling

eqsomebody · Feb 20, 2025

I did search many threads and could not find anything to assist me with this.

I am running kissassist. This is my first time setting up the puller function. I have a small radius camp (140) that I want to focus on. Here is what happens:

I start kissassist
Loads the INI and checks for errors, etc..
Get the message I am pulling & my pet >> ABCD << is Tanking
Get the message it is memming the spellset followed by long pause
Get the message Pull Ranking is off. You need to update MobsToPull. Normal Pulling Enabled.

Nothing. I have left it several times for 10+ minutes and nothing.
Buffs on my pet wear off... nothing
Mobs well within the camp radius and pull radius... nothing

I cast a buff on my pet... kissassist wakes up, targets and kills the closest mob.
When that mob is dead... nothing.
Despite there being another mob within the pull radius and there is a roamer that also comes right up to me.. nothing.

I cast a buff on my pet... kissassist wakes up, targets and kills the next closet mob.
/rinse /repeat

Something is getting hung up. I saw in another post where I need to turn on DanNet or EQBCOn. Turned on DanNet. Still same issue.

Here are the settings I have. Is there something that is causing this from staling or not targeting?

Code:

[General]
KissAssistVer=12.002
Role=PullerPetTank
CampRadius=100
CampRadiusExceed=400
ReturnToCamp=1
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=15
MedStop=100
MedCombat=0
LootOn=0
RezAcceptOn=1|90
AcceptInvitesOn=1
GroupWatchOn=0
GroupWatchCheck=FALSE
CorpseRecoveryOn=0
EQBCOn=0
DanNetOn=1
DanNetDelay=20
IRCOn=0
CampfireOn=0

DPSMeter=1
ScatterOn=0
LOSBeforeCombat=0
UseSpawnMaster=0
XTSlot=1

[SpellS]
MiscGem=14
MiscGemLW=0
MiscGemRemem=12
LoadSpellSet=1
SpellSetName=KissAssist 1
CastingInterruptOn=1
CheckStuckGem=1
Gem1=Reciprocal Paroxysm
Gem2=Pyre of Illandrin Rk. III
Gem3=Ignite Remembrance Rk. III
Gem4=Extermination Rk. III
Gem5=Luggald Venom Rk. III
Gem6=Uncia's Pallid Haze Rk. III
Gem7=Goremand's Grip of Decay
Gem8=Pyre of the Abandoned Rk. III
Gem9=Raging Shadow Rk. III
Gem10=Ghastly Leech Rk. III
Gem11=Bestow Ruin Rk. III
Gem12=Instill Ally Rk. III
Gem13=Call Ravening Skeleton Rk. II
Gem14=Decree for Blood Rk. III

[Buffs]
BuffsOn=1
BuffsSize=8
Buffs1=Realmside Rk. III
Buffs2=Golemskin Rk. II
Buffs3=Shield of Inescapability RK. II
Buffs4=Shield of Memories Rk. III
Buffs5=Blood Magic|mana|60|50
Buffs6=Death Bloom|mana|80|50
Buffs7=NULL
Buffs8=NULL
RebuffOn=1
CheckBuffsTimer=10
PowerSource=Emberquartz Conjuror Source

[DPS]
DPSSize=19
DPSOn=1
DPSSkip=5                   
DPSInterval=1               
DPS1=Bestow Ruin Rk. III|100|Cond1
DPS2=Scent of Thule|100|Once|Pull       
DPS3=Companion's Aegis|99|Cond4       
DPS4=Instill Ally Rk. III|99|Cond3     
DPS5=Decree for Blood Rk. III|99|Cond2
DPS6=Raging Shadow Rk. III|98|Once     
DPS7=Pyre of the Abandoned Rk. III|98
DPS8=Goremand's Grip of Decay|98         
DPS9=Decree for Blood Rk. III|99|Cond2
DPS10=Pyre of Illandrin Rk. III|97       
DPS11=Ignite Remembrance Rk. III|96       
DPS12=Extermination Rk. III|95
DPS13=Decree for Blood Rk. III|99|Cond2
DPS14=Luggald Venom Rk. III|94             
DPS15=Uncia's Pallid Haze Rk. III|93       
DPS16=Ghastly Leech Rk. III|92
DPS17=Call Ravening Skeleton Rk. II|92
DPS18=Bestow Ruin Rk. III|97|Cond1         
DPS19=Mend Companion|99|Cond5
DebuffAllOn=0

[Melee]
AssistAt=99
MeleeOn=0
FaceMobOn=0
MeleeDistance=135
StickHow=snaproll
AutoFireOn=0
UseMQ2Melee=0
TargetSwitchingOn=0
PetTauntOverride=1

[GoM]
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSize=5
GoMSpell1=Reciprocal Paroxysm|Mob
GoMSpell2=Pyre of Illandrin Rk. II|Mob
GoMSpell3=Extermination Rk. III|Mob
GoMSpell4=Luggald Venom Rk. III|Mob
GoMSpell5=Ghastly Leech Rk. III|Mob

[AE]
AEOn=0
AESize=10
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
AE6=NULL
AE7=NULL
AE8=NULL
AE9=NULL
AE10=NULL

[Debuffs]
DebuffAllOn=1
DebuffTotal=2
Debuff1=Scent of Thule|100|Cond6
Debuff2=The Lady's Entreaty|Mob|Cond7

[Aggro]
AggroOn=1
AggroSize=5
Aggro1=command:/pet attack|100
Aggro2=NULL
Aggro3=NULL
Aggro4=NULL
Aggro5=NULL

[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=1
HealInterval=0
AutoRezOn=0
HealsSize=6
Heals1=Companion's Fortification|40|Pet|Cond1
Heals2=Mend Companion|40|Pet|Cond1
Heals3=Companion's Intervening Divine Aura|40|Pet|Cond1
Heals4=Bracing Revival Rk. II|60|Cond1
Heals5=Companion's Aegis|90|Pet|Cond4
Heals6=Instill Ally Rk. III|99|Cond3
XTarHeal=0
XTarHealList=Xtar slots here Example: 5|6|7
HealGroupPetsOn=0
RezMeLast=0

[Cures]
CuresOn=2
CuresSize=5
Cures1=Aureate's Bane|Cond8
Cures2=NULL
Cures3=NULL
Cures4=NULL
Cures5=NULL

[Pet]
PetOn=1
PetSpell=Margator's Shade
PetShrinkOn=1
PetShrinkSpell=Chlorophyll Loop
PetBuffsOn=1
PetBuffsSize=8
PetBuffs1=Companion's Aegis
PetBuffs2=Instill Ally Rk. III
PetBuffs3=Sigil of Putrefaction Rk. III
PetBuffs4=Companion's Aegis
PetBuffs5=NULL
PetBuffs6=NULL
PetBuffs7=NULL
PetBuffs8=NULL
PetCombatOn=1
PetAssistAt=100
PetAttackDistance=60
PetToysSize=6
PetBreakMezSpell=NULL
PetRampPullWait=0
PetSuspend=0
MoveWhenHit=0
PetHoldOn=1
PetForceHealOnMed=0
PetFocus=NULL

[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92

[Mez]
MezOn=0
MezRadius=50
MezMinLevel=Min Mez Spell Level
MezMaxLevel=Max Mez Spell Level
MezStopHPs=80
MezSpell=Your Mez Spell|2
MezDebuffOnResist=0
MezDebuffSpell=Your Debuff Spell

[Burn]
BurnAllNamed=1
UseTribute=0
BurnSize=11
BurnText=Named...full burn!!
BurnAllNamed=1             
Burn1=Focus of Arcanum     
Burn2=Swarm of Decay       
Burn3=Rise of Bones           
Brun4=Frenzy Dead
Burn5=Silent Casting       
Burn6=Companion's Fury     
Burn7=Hand of Death         
Burn8=Heretic's Twincast   
Burn9=Spire of Necromancy
Burn10=Gathering Dusk       
Burn11=Dying Grasp         
Burn4=NULL

[Pull]
PullWith=Encroaching Darkness
PullMeleeStick=0
MaxRadius=140
MaxZRange=70
UseWayPointZ=0
PullWait=0
PullRadiusToUse=140
PullRoleToggle=0
ChainPull=0
ChainPullHP=50
PullPause=30|2
PullLevel=0|0
PullArcWidth=360
PullOnReturn=0

[PullAdvanced]
PullLocsOn=0

[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=1
AFKGMAction=1
AFKPCRadius=500
CampOnDeath=0
ClickBacktoCamp=0
[KConditions]
ConOn=0
CondSize=10
Cond1=!${Me.Buff[Bestow Ruin Rk. III].ID}       
Cond2=!${Me.Song[Defiler's Synergy V].ID}   
Cond3=!${Pet.Buff[Instill Ally Rk. III].ID}   
Cond4=!${Pet.Buff[Companion's Aegis VIII].ID}
Cond5=${Pet.PctHPs}<=60             
Cond6=!${Target.Buff[Scent of Terris].ID}
Cond7=!${Target.Buff[Echo of Tashan].ID}
Cond8=${Me.Song[Lesser Curse of Subjugation].ID}
Cond9=Null
Cond10=Null

Thanks!

Edit: Added full INI, turned on DanNet and added additional detail.

durango773 · Feb 20, 2025

Cause your settings are wrong it looks like..

KissAssist - Read📖Guides

www.redguides.com

2/3 of the way down talks about how to config pulling, and its not what your showing there..

eqsomebody · Feb 20, 2025

Think I found my issue. I had another toon in the group that was invising the group after the kill which looks like the macro was pausing. Casting pet buff was breaking invis and macro would resume. I am on my 2nd consecutive kill without touching the keyboard.

Sic · Feb 20, 2025

also: you definitely want dpson=2 and not dpson=1, and you can use "99" for everything, dpson=1 is pretty antiquated, and isn't going to function the way you think it does
you also don't need any ranks listed (and haven't for quite a few years)

these seem pretty low

INI:

MaxRadius=140
MaxZRange=70

your lesser curse of sub --- you should consider using "curse of sub" and not lesser since there are 3 types

you also have your conditions turned off

eqsomebody · Feb 20, 2025

Sic said:
also: you definitely want dpson=2 and not dpson=1, and you can use "99" for everything, dpson=1 is pretty antiquated, and isn't going to function the way you think it does
you also don't need any ranks listed (and haven't for quite a few years)

these seem pretty low

INI:

MaxRadius=140 MaxZRange=70

your lesser curse of sub --- you should consider using "curse of sub" and not lesser since there are 3 types

you also have your conditions turned off

Thanks!! Did not even notice the conditions. Yeah, I am just starting to kick the tires. Only two toons. I am starting out small by farming out one PH spot (3 mobs in that radius). Once I get comfortable with it working properly, as you can see I need some work, I will expand the range. Thank you for the suggestions.

eqsomebody · Feb 20, 2025

Sic said:
your lesser curse of sub --- you should consider using "curse of sub" and not lesser since there are 3 types

If I change this from Lesser Curse of Subjugation to just 'Curse of Subjugation", it will catch all three?

Algar · Feb 20, 2025

eqsomebody said:
If I change this from Lesser Curse of Subjugation to just 'Curse of Subjugation", it will catch all three?

Yes, it is a search that returns the first value found with the terms, more or less.

character - MacroQuest Docs

docs.macroquest.org

kaen01 · Feb 20, 2025

campradius=100 is too big, make it 30

LoadSpellSet=1 set this to 2 to mem the spells listed in your ini

CastingInterruptOn=1 i suggest turning this off, its more trouble than its worth
CheckStuckGem=1 turn this off, not needed anymore that bug it fixes is no longer a bug.

dpson=1 use 2 instead of 1, its much more better and responsive

PullRadiusToUse=140 this is a percentage of the spells range to get close to the mob to pull, you cant get 140% close!, make it 90

PullArcWidth=360 makes it check pullarc stuff, to turn that off set it to 0

eqsomebody · Feb 20, 2025

kaen01 said:
campradius=100 is too big, make it 30

LoadSpellSet=1 set this to 2 to mem the spells listed in your ini

CastingInterruptOn=1 i suggest turning this off, its more trouble than its worth
CheckStuckGem=1 turn this off, not needed anymore that bug it fixes is no longer a bug.

dpson=1 use 2 instead of 1, its much more better and responsive

PullRadiusToUse=140 this is a percentage of the spells range to get close to the mob to pull, you cant get 140% close!, make it 90

PullArcWidth=360 makes it check pullarc stuff, to turn that off set it to 0

Thank you!

eqsomebody · Feb 20, 2025

I turned on the ConOn=1 and started getting these errors. I do not see anything in there I can tie back to a specific setting in the INI. Other than that, it is now pulling as I would expect. I increased the pull radius to add a 4th mob to the rotation. Next, I am going to see if I can use the [MEZ] section to see if I can do a /pet attack instead of casting a spell on adds.

kaen01 · Feb 21, 2025

Cond3=!${Pet.Buff[Instill Ally Rk. III].ID}
Cond4=!${Pet.Buff[Companion's Aegis VIII].ID}

these two conditions, there is no .ID on pet buffs they return the slot number the buff is in

int Buff[buffname]¶

Returns the slot number for buffname

so thats why you getting that error

eqsomebody · Feb 24, 2025

kaen01 said:
Cond3=!${Pet.Buff[Instill Ally Rk. III].ID}
Cond4=!${Pet.Buff[Companion's Aegis VIII].ID}

these two conditions, there is no .ID on pet buffs they return the slot number the buff is in

int Buff[buffname]¶
Returns the slot number for buffname

so thats why you getting that error

Thanks!

Motojeff · Feb 24, 2025

You should check out QKI, It can act as a fast way to make adjustments to your KissAssist ini in game.

Set role, check stuff.

Set pet settings, Kill stuff.

BigDorf · Feb 25, 2025

@eqsomebody I hope you are making progress to get your puller-pet-tank to work!

When I experimented with a necro, doing puller-pet-tank, I had an aggro section as follows:

Code:

[Aggro]
AggroOn=1
AggroSize=3
Aggro1=Death Peace|80|>
Aggro2=/stand
Aggro3=Death's Effigy|99|>

I don't know if this is good or not in the KA profile terms.

What I saw in game play though is -

After the pull the necro would be back at the camp and feign death ( death peace ) and at over level 90 that is instant from the AA ability.
Similar during the fight at camp, if the dot's out aggro the pet it would feign death again to help transfer aggro back to the pet.
After the feign he would get up and resume.

If that was my aggro settings, or KA generally or some other plugin I don't know.

Regards and Best Wishes

@eqsomebody I notice you mention this in your original ask:

Get the message Pull Ranking is off. You need to update MobsToPull. Normal Pulling Enabled.

Just to make sure that base is covered, you are aware of your own toon KA profile.

There is also a file called "KissAssist_Info" in the config directory.
In that file it has the sections named for each zone you have ran the KA macro in.
Within each section, there is a comma delimited string list that KA toons use:

MobsToPull, the mob names to look for in your 'KA pull radius'.
MobsToIgnore
MobsToBurn

An example:

Code:

[Dragonscale Hills]
MezImmune=#Witchkin,#Dungore,#King Mustef
MobsToPull=a doombug scavenger,a dragonscale shadowcat,a dragonscale viper,a red wolf,#Witchkin,#Dungore,#King Mustef
MobsToIgnore=a dragonscale spider egg
MobsToBurn=#Witchkin,#Dungore,#King Mustef

I thought this may be of use as it includes a learning I had about mob names. It's not just what is displayed when target the mob. In the above example, found the named mobs needed to be prefix with the "#" to have them work.

Good luck on your hunt!

eqsomebody · Mar 7, 2025

BigDorf said:
There is also a file called "KissAssist_Info" in the config directory.
In that file it has the sections named for each zone you have ran the KA macro in.
Within each section, there is a comma delimited string list that KA toons use:

@BigDorf Thank you for the response! Taking the various different pieces of the responses has helped a lot. I am keeping it basic and so far it is running pretty good on my toon pair. One issue I am trying to figure out is how to handle adds that come into the camp. I am a pet class and my pet tanks. When an add comes into camp, how do I automatically have the pet switch to the add(s) to pick up aggro so it/they do not pummel clerics? Before asking this, I have done numerous searches and cannot find anything. Right now, I have Agrro1=command:/pet attack|100 but that has not worked. I guess aggro is only when it is on me which is not an issue. I just need the pet to go whack on adds in the camp a few times to pick up agro. Thanks!

ctaylor22 · Mar 8, 2025

Make sure you have TargetSwitchingOn turned on. When you switch targets to the new target you may have to issue the /pet attack command to get the pet to attack your new target.

eqsomebody · Mar 10, 2025

ctaylor22 said:
Make sure you have TargetSwitchingOn turned on. When you switch targets to the new target you may have to issue the /pet attack command to get the pet to attack your new target.

I do. I also have myself set to MA so I can switch targets and then have pet attack. Was trying to figure out how to do it automatically. Many times I do not notice an add or I am too slow to respond.

ctaylor22 · Mar 10, 2025

Yea. we left out the code to have the pet switch targets when the MA switches the target. The community liked the ability of leaving the pets on one target and then having the characters on another. Might be able to add an option so you can force your pet to switch targets when a character switches? Interested?

LrdDread · Mar 10, 2025

Might be able to add an option so you can force your pet to switch targets when a character switches? Interested?

That would be an awesome option, while tanking the ToB missions on an SK, I was having to manually make my pet come off the main mob and switch to the mob that I was now tanking.

ctaylor22 · Mar 10, 2025

I can add an option to have the MA's pet switch targets with the MA. It will be turned off by default, but when on it will redirect the pet as you switch targets.

Problem - PullerPetTank Not Pulling

eqsomebody

durango773

Taco Giver

KissAssist - Read📖Guides

eqsomebody

Sic

Administrator

eqsomebody

eqsomebody

Algar

character - MacroQuest Docs

kaen01

I am not a complete idiot!..some parts are missing

eqsomebody

eqsomebody

kaen01

I am not a complete idiot!..some parts are missing

int Buff[buffname]¶

eqsomebody

int Buff[buffname]¶

Motojeff

BigDorf

eqsomebody

ctaylor22

eqsomebody

ctaylor22

LrdDread

ctaylor22

Users who are viewing this thread

Cart

Problem - PullerPetTank Not Pulling

Taco Giver

Administrator

I am not a complete idiot!..some parts are missing

I am not a complete idiot!..some parts are missing

int Buff[buffname]¶​

int Buff[buffname]¶​

Users who are viewing this thread

Cart

int Buff[buffname]¶

int Buff[buffname]¶