• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Problem - Not able to pull mobs in Campradius

Darksight

New member
Joined
Feb 13, 2019
RedCents
40¢
Having an issue with my group and I will try to explain everything I can and respond to questions you may have about what I am using and so forth. Please be patient as I am new to this again from 3 years ago.

I have tried to set up a proper camp in Frontier Mtns. (EoK) at the small fort on the western middle of the map. I set up camp (camp=30) with original camp radius=500. That pretty much is everything at the fort plus some outside since I am using pullarcwidth=360. It started fine as I pulled the front 2-3 then pulled a couple inside. From the front entrance in my campradius=500 I did pull the named with 3-4 others. Luckily I survived and it was a close call. Anyways, afterwards I noticed it was telling me Waiting 5 seconds No Spawned Mobs 0-200. If my radius is set to 500, why did it say 200? I have a theory because I am use a spell to pull with my SK named Protest of Power that is range 200. When I look at the map for the circles, I see 4 circles. 1. camp which is 30, 2. spell range 200, 3. camp radius of 500 (stationary) and 4. 500 radius that moves with me at the center of it. Now no mobs are in the camp=30 or the spell range of 200. But there are plenty of mobs in the campradius=500 but I will NOT pull those mobs unless I run out and tag with Protest for Power manually and then it kicks in to return to camp and fights normally. After the fight, it will pull mobs again but only in the smaller spell range of 200 (nothing outside that circle). I can't find anything in the KA beginner vids or ini decriptions lists for KA. I have even tried to increase camp radius to 800 and down to 400. Nothing works. SK was set to PullerTank.

Now I was reading and I saw a old post Sic saying it is would be best to try Hunter Tank since and have the group Chase for faster leveling as chain pulling would mean the bard in my group would be out pulling and not dps'ing. I said ok and went to Scorched Woods and set up camp outside the entrance to the Chardok area. I set the campradius to 500 and same issues as stated above. I change the campradius to 800 and same thing. I can't not pull anything outside of my 200 range spell. I know i have to be missing something. Other than the pulling the group I have is knocking them out fast and easy whether it is a static camp or roaming camp.

Is my camp radius too large? I am just trying place the most mobs in the circle when I start my /mac kissassist. here is my ini for the SK (not posting others since they seem to be fine for the camps and chase)

Rich (BB code):

[General]
KissAssistVer=12.002
Role=Hunter Tank
CampRadius=30
CampRadiusExceed=800
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedStop=100
MedCombat=0
LootOn=1
RezAcceptOn=1|96
AcceptInvitesOn=1
GroupWatchOn=0
GroupWatchCheck=FALSE
CorpseRecoveryOn=0
EQBCOn=0
DanNetOn=1
DanNetDelay=20
IRCOn=0
CampfireOn=0
CharInfo=Shadow Knight|114|GOLD
DefaultUI=TRUE
DPSMeter=0
ScatterOn=0
LOSBeforeCombat=1
XTSlot=1

[Buffs]
BuffsOn=1
BuffsSize=15
Buffs1=Dark Lord's Unity (Azia)|Cond1
Buffs2=Tylix's Skin|Cond2
Buffs3=Breather|end|19|Cond3
Buffs4=Voice of Thule|Me|Cond4
Buffs5=Defiant Stance|Cond5
Buffs6=Shroud of the Doomscale
Buffs7=Vizat's Horror
Buffs8=Drape of the Wrathforged
Buffs9=Remorseless Demeanor
Buffs11=Livio's Covenant
Buffs12=Call of Gloomhaze
Buffs14=Guise of the Deceiver|Dual|Illusion: Dark Elf
Buffs15=Darkwater Crystal Earring
RebuffOn=1
CheckBuffsTimer=10
Buffs10=NULL
Buffs13=NULL
PowerSource=NULL

[AE]
AEOn=1
AESize=10
AERadius=50
AE1=Revulsion|2|Mob
AE2=Explosion of Hatred|3|Mob
AE3=Explosion of Spite|3|Mob
AE4=Stream of Hatred|4|Mob
AE5=NULL
AE6=NULL
AE7=NULL
AE8=NULL
AE9=NULL
AE10=NULL

[DPS]
DPSOn=2
DPSSize=20
DPSSkip=20
DPSInterval=2
DPS1=Terror of Kra'Du|100
DPS2=Repel|99|Mash
DPS3=Sebilisian Dragonscale Breastplate|99
DPS4=Gift of the Quick Spear|99
DPS5=Spear of Tylix|99
DPS6=Dire Testimony|99
DPS7=Touch of T`Vem|99
DPS9=Wounding Blade|99
DPS11=Vicious Bite of Chaos|99|weave
DPS12=Bond of Xalgoz|99
DPS13=Torrent of Suffering|99|Cond6
DPS14=Touch of Hemofax|96|Cond7
DPS15=Chattering Bones|99
DPS16=Visage of Decay|99|Cond8
DPS17=Refute for Power|99|Cond9
DPS18=Visage of Death|99
DPS19=Thought Leech|99|Cond10
DPS20=Veil of Darkness|99
DebuffAllOn=0
DPS8=NULL
DPS10=NULL

[Aggro]
AggroOn=1
AggroSize=4
Aggro1=Taunt|100|<
Aggro2=Refute for Power|100|<
Aggro3=Ageless Enmity|100|<
Aggro4=Projection of Doom|100|<

[Heals]
HealsOn=4
HealsSize=2
Heals1=Shield Flash|35|Tap|Cond11
Heals2=Leech Touch|30|Tap
Heals3=Dichotomic Fang|50|Tap
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealInterval=0
AutoRezOn=1
XTarHeal=0
XTarHealList=Xtar slots here Example: 5|6|7
HealGroupPetsOn=0
RezMeLast=0

[Pet]
PetOn=1
PetCombatOn=1
PetSpell=Minion of T`Vem
PetBuffsOn=0
PetBuffsSize=1
PetBuffs1=Gift of T`Vem
PetRampPullWait=0
PetSuspend=0
PetForceHealOnMed=0
PetFocus=NULL
PetShrinkOn=0
PetShrinkSpell=Tiny Companion
PetAssistAt=95
PetAttackDistance=115
PetToysSize=6
PetBreakMezSpell=NULL
MoveWhenHit=0
PetHoldOn=1

[Burn]
BurnSize=14
BurnAllNamed=1
Burn1=command:/stopdisc|Cond12
Burn2=Impudent Influence
Burn3=Doomscale Mantle|Cond13
Burn4=Cursed Guardian Discipline|Cond12
Burn5=Deflection Discipline|Cond12
Burn6=Leechcurse Discipline|Cond12
Burn7=Unholy Aura Discipline|Cond12
Burn8=T`Vyl's Resolve
Burn9=Claret Blade
Burn10=Innoruuk's Dark Blessing
Burn11=Reflexive Revulsion
Burn12=Dread Suzerain's Conflagrant Breastplate
Burn13=Spite of Kra`Du
Burn14=Scourge Skin
UseTribute=0

[GoM]
GoMSize=3
GoMSpell1=Touch of T`Vem|Mob
GoMSpell2=Dire Testimony|Mob
GoMSpell3=Gift of the Quick Spear
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob

[KConditions]
ConOn=1
CondSize=14
Cond1=!${Me.Buff[${Spell[Call of Nightfall].RankName}].ID}
Cond2=!${Me.Buff[${Spell[Tylix's Skin].RankName}].ID}
Cond3=${Me.PctEndurance} < 19
Cond4=!${Me.Buff[${Spell[Voice of Thule III].RankName}].ID}
Cond5=!${Me.Buff[${Spell[Defiant Stance].RankName}].ID}
Cond6=!${Me.Buff[Torrent of Suffering Recourse].ID}
Cond7=!${Me.Buff[${Spell[Gift of Hemofax].RankName}].ID}
Cond8=${Me.AltAbilityReady[Visage of Decay]} && !${Me.Buff[${Spell[Visage of Death VII].RankName}].ID}
Cond9=!${Me.Buff[Refute for Power].ID}
Cond10=${Me.PctMana} < 50
Cond11=${Target.Named}
Cond12=${Me.ActiveDisc.ID} && ${Me.ActiveDisc.Name.NotEqual[Impudent Influence]} && ${Me.CombatAbilityReady[${Spell[Impudent Influence].RankName}]} || ${Me.ActiveDisc.ID} && ${Me.ActiveDisc.Name.NotEqual[Doomscale Mantle]} && ${Me.CombatAbilityReady[${Spell[Doomscale Mantle].RankName}]}
Cond13=${Me.ActiveDisc.ID} && ${Me.ActiveDisc.Name.NotEqual[Impudent Influence]} && ${Me.CombatAbilityReady[${Spell[Impudent Influence].RankName}]}
Cond14=TRUE

[Spells]
Gem1=Spear of Tylix Rk. II
Gem2=Dire Testimony Rk. II
Gem3=Touch of T`Vem
Gem4=Helot Skin Rk. II
Gem5=Bond of Xalgoz Rk. II
Gem6=Torrent of Suffering
Gem7=Touch of Hemofax
Gem8=Revulsion Rk. II
Gem9=Defiant Stance Rk. II
Gem10=Tylix's Skin
Gem11=Terror of Kra`Du Rk. II
Gem12=Refute for Power Rk. II
Gem13=Minion of T`Vem Rk. II
MiscGem=8
MiscGemLW=0
MiscGemRemem=1
LoadSpellSet=0
SpellSetName=KissAssist
CastingInterruptOn=1
CheckStuckGem=1

[Melee]
AssistAt=99
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0
UseMQ2Melee=1
TargetSwitchingOn=0
PetTauntOverride=0

[GMail]
GMailHelp=Events currently support - Dead,Drag,GM,Level,Named,Leftgroup,Tells
GMailOn=0
GMailSize=5
GMail1=NULL
GMail2=NULL
GMail3=NULL
GMail4=NULL
GMail5=NULL

[Cures]
CuresOn=0
CuresSize=5
Cures1=NULL
Cures2=NULL
Cures3=NULL
Cures4=NULL
Cures5=NULL

[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92

[Pull]
PullWith=Protest for Power
PullMeleeStick=0
MaxRadius=800
MaxZRange=150
UseWayPointZ=0
PullWait=5
PullRadiusToUse=90
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
PullPause=30|0
PullLevel=0|0
PullArcWidth=360
PullOnReturn=0

[PullAdvanced]
PullLocsOn=0

[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=1
AFKGMAction=2
AFKPCRadius=300
CampOnDeath=0
ClickBacktoCamp=0

[KissError]
LastCMD:=/endmacro
ErrorDateTime:=04/24/2023 22:25:42
ErrorMsg:=DoCommand - Couldn't parse '/atrget Rhorik'
DataError:=NULL
SyntaxError:=NULL
RunningTime:=3685975
BuildDate:=20230419
CurrentUI:=Default


Another issue I am having not relating to pulling, when moving I type /dge /target <charname> and /dge /follow. When I do that and start to move my full group sets out to follow but they are more in a line at different distances. I turn around and see a couple followed pretty close then the 4th one is way behind them, the 5th is way behind the 4th one and the 6th one is way behind the 5th one almost when I started running from. I tried using the Come to Me button and no one moves. I try to Follow Me button and no one moves. I move everyone manually back to me and try Follow Me again and they stay still. I do think I pushing running 6 accounts at once on my system but they do work fine when actually killing stuff. After a few tries I can get everyone following my with /dge /follow command but then they fall behind 2-300 distance and I stop and wait for them to catch up and then move again. I didn't check to see what the lag was like on each toon but on main screen the latency is is normally around mid 90.

Any help would be much appreciated.
 
CampRadius should be 30 or 35. CampRadius is not used for pulling. Your MeleeDistance looks good at 75. You want CampRadius to be less than MeleeDistance. You would need to change MaxRadius for the pull routine to scan a larger/smaller area for mobs. Use /chase and not /follow
 
These control pull radius and vertical height.
MaxRadius=800
MaxZRange=150

PullArcWidth=0 will default to 360 degrees.

You may want to look at the nav mesh. It's possible that it's not pulling mobs because there is no path available on the mesh. If so, you can edit the nav mesh to create a path. This can be a bit tricky and finicky though.

Nothing looks obviously wrong to me though, but there are others here that are much more knowledgeable than me.
 
Problem - Not able to pull mobs in Campradius

Users who are viewing this thread

Back
Top
Cart