• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Cleric

Plugin - MQ2Cleric (2 Viewers) 3.1.52471.11

[Combat]
Yaulp won't fire if you're on a mount, if you're sitting, if the AA isn't ready, if the buff doesn't stack, and requires you're under 95% mana if you have the AA.
If you don't have the AA, or you're in BYOS and have Yaulp memorized etc. Will fire assuming it's ready and you're in combat. This requires UseMelee on.

[Downtime]
Won't fire in a safe zone like guild lobby/pok where buffs are forever / there is really no need to use it, if you're on a mount, if you're sitting, if the AA isn't ready, if the buff doesn't stack, and requires you're under 95% mana if you have the AA.
Requires you're at least level 56 (for the mana regen) have Yaulp memorized etc. Will fire assuming it's ready and you're in combat. This requires UseMelee on.
 
Howdy

So my godess Healer has reached level 60 and i went on spell-shopping spree. Last time was at level 55. She now fires Yaulp V (level 56ish Version). The basis version without focus holds for 4 ticks, so 24 seconds. The buff shows 40 to 42ish seconds with focus. She doesen't care the focused 40ish seconds and refires after 4 ticks. Is that a bug or intentional?

Secondly i tried to /clr AddClicky Downtime with the white chain bridle (100k horse from bazaar). This resulted in permarecasting the horse. And no, i dont have autodismount enabled, since previously i clickd it manually. But after fighting spirocs who constantly threw her off the horse i wanted to add it to the buffing routine.

The last thing i wonder is, how do you emergency run out of a zone? What hotkey do you have to achieve this? Do you pause all toons and with some fancy nav command you tell them to run to zone or to the nearest clickable door. What works for you best?

cheers
 
Any chance of adding Ancient: High Priest's Bulwark(60) to be cast on self instead of Blessed Armor of the Risen(58) if the cleric has the spell? Would be useful come Velious until level 65 PoP on Rizlona. In game comparison below if that is needed.1600958292140.png
 
There's some assumptions made with the plugin. One of them being that you have consent. So when it does a /corpse it assumes the corpse got dragged and it will try to cast. So if you don't have consent, it's possible it's spamming it because it's trying to drag the corpse.

I had this happen again, consent is there but the corpse is 179 away and he's in the /summon spam.
 
I had this happen again, consent is there but the corpse is 179 away and he's in the /summon spam.
are you lagging? or is this one of those things where the body is and where the server says are different? we have a range check and we don't try and /corpse at 179 units away
 
Howdy

So my godess Healer has reached level 60 and i went on spell-shopping spree. Last time was at level 55. She now fires Yaulp V (level 56ish Version). The basis version without focus holds for 4 ticks, so 24 seconds. The buff shows 40 to 42ish seconds with focus. She doesen't care the focused 40ish seconds and refires after 4 ticks. Is that a bug or intentional?

Secondly i tried to /clr AddClicky Downtime with the white chain bridle (100k horse from bazaar). This resulted in permarecasting the horse. And no, i dont have autodismount enabled, since previously i clickd it manually. But after fighting spirocs who constantly threw her off the horse i wanted to add it to the buffing routine.

The last thing i wonder is, how do you emergency run out of a zone? What hotkey do you have to achieve this? Do you pause all toons and with some fancy nav command you tell them to run to zone or to the nearest clickable door. What works for you best?

cheers
I can see why the yaulp thing is happening, I'll check on it

The "shitty" bazaar horses are a known issue that is getting looked at soon :tm: (actually fixed already - it is the same issue with some of the poisons spam clicking. some items don't know what kind of items they are supposed to be - like in the case of these mounts ---- tl;dr fix`t next update)

I have a "how i move my toons" vid in my signature. to send them to a door i usually pause everyone and then right click on a zone location in the find window
 
Last edited:
are you lagging? or is this one of those things where the body is and where the server says are different? we have a range check and we don't try and /corpse at 179 units away

This could be it, server was feeling off and the login server was down. I had no issue running up and pulling the corpse back with another, I'll keep an eye on it.
 
I have a few comments. to be honest I didn't read 20 pages of comments - TLP based.
MQ2Cleric does not recognize Heroic Bond, it overwrites with Heroism. Is this intended?
Is there a Save function? I could not find in documentation and each time I log in I have to reset the "dont melee, No yaulp, and No Nuke" lines.
Could there be a "use Complete Heal on MT if" function?
Mark Of Karn adaptation in the works?

Thank you, love the plugin!
 
I have a few comments. to be honest I didn't read 20 pages of comments - TLP based.
MQ2Cleric does not recognize Heroic Bond, it overwrites with Heroism. Is this intended?
Is there a Save function? I could not find in documentation and each time I log in I have to reset the "dont melee, No yaulp, and No Nuke" lines.
Could there be a "use Complete Heal on MT if" function?
Mark Of Karn adaptation in the works?

Thank you, love the plugin!
Howdy Diamondmind,

the hb/heroism is patched awaiting a rebuild - as mentioned in earlier posts
1600994040923.png

window doesn't save - if you want to save a command use the slash command equivalent /clr usemelee off for example
Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10 <


We don't plan on adding any further CH functionality at this time. Lemons has a CH macro > HERE < if you want just pure complete heal cycling

When we finish up some more of our caster logic, things will get moved back to cleric - currently it only does nuking and damage shields if you are in combat (and battlemode for dmg shield)
 
This could be it, server was feeling off and the login server was down. I had no issue running up and pulling the corpse back with another, I'll keep an eye on it.

Ok, seems that when I have a target on my extended target window, it's not doing the distance check and trying to Rez. if I clear off the extended target, it stops.
 
I have been using this for about a week now, it is working great except for cures it does not seem to cure anyone of anything, there are no errors reported it just does not cast or mem the cure spells.
 
I have been using this for about a week now, it is working great except for cures it does not seem to cure anyone of anything, there are no errors reported it just does not cast or mem the cure spells.
if you are lower lvl it isn't forcing the cure to be memorized (we get our cureall at 94) - and for cures and buffs it only works on local toons that are in your mq2cwtnbuffs file.
 
Just discovered that if you don t have a primary weapon equiped, it summons clr hammer and equip it.. Awesome feature. I love it :)
 
Love this plugin but it has a small bug where it gets stuck when changing spells and sits there with the spell book open causing it to not do anything until I manually close the spell book
 
Love this plugin but it has a small bug where it gets stuck when changing spells and sits there with the spell book open causing it to not do anything until I manually close the spell book
this is usually due to having too low of a background FPS set - to "do work" you really need at LEAST a 30+ background fps, (recomended 60+ fps) in your alt-O -> advanced EQ settings. We do make you get out of your book if you're chilling in it and you end up with xtargets - but i would suggest double checking your fps settings

1601304999143.png
 
So english isent my native language.
Can someone explain me two things better:
- what exactly does "battlemode" do?
- what is "dissiheal"?
- to wich heal does promised renewal belong to? is it possible to tune it or will the cleric just fire it when available?
 
So english isent my native language.
Can someone explain me two things better:
- what exactly does "battlemode" do?
- what is "dissiheal"?
- to wich heal does promised renewal belong to? is it possible to tune it or will the cleric just fire it when available?
howdy Blas

battlemode swaps your interventions to contraventions etc

dissiheal is the heal value for the dissidentheal spells (Dissident Blessing and Undying Life)

promised renewal is on your promised healing values PromHealMA / PromNotMA in your window (/clr MAPromise # or /clr PromHealMA # and /clr NonMAPromise # or /clr PromHealNotMA). will just not fire when available
 
Could it be changed so that if Battlemode is on, but UseMelee is off that Contraventions are still used? I have UseNuke turned on, but if UseMelee is off it just ignores UseNuke/Battlemode and goes back to as if Battlemode isn't on and only casts just heals.
 
Could it be changed so that if Battlemode is on, but UseMelee is off that Contraventions are still used? I have UseNuke turned on, but if UseMelee is off it just ignores UseNuke/Battlemode and goes back to as if Battlemode isn't on and only casts just heals.
sorry, not at this time.

I've mentioned a few times in the thread that when we redo our nuke logic some stuff will get refactored to allow nukes and nuke related stuff to work without being in melee combat - but at this moment.
 
Im sorry if this has been answered before or if i am posting in the wrong place. Is there a command to set the clerics Quiet Prayer on a specific toon as my bard burns through mana i would like to have the plug in do the business.
 
Im sorry if this has been answered before or if i am posting in the wrong place. Is there a command to set the clerics Quiet Prayer on a specific toon as my bard burns through mana i would like to have the plug in do the business.
no it checks your group from group member 1 through 5 in that order
 
Im sorry if this has been answered before or if i am posting in the wrong place. Is there a command to set the clerics Quiet Prayer on a specific toon as my bard burns through mana i would like to have the plug in do the business.


You'll be disappointed to here that bards don't get the mana from this, much the same bards don't get mana from paragon. Bards are a weird breed.


I am unsure if it was fixed/changed to skip bards on the para checks from mq2bst, and assume clerics would benefit skipping bards also on QM/QP also
 
You'll be disappointed to here that bards don't get the mana from this, much the same bards don't get mana from paragon. Bards are a weird breed.


I am unsure if it was fixed/changed to skip bards on the para checks from mq2bst, and assume clerics would benefit skipping bards also on QM/QP also
correct - as of the update we made to our "does this toon have mana" bards are not treated as such for spells like this
 
I manually clicked Quiet Prayer on Bard and he got the boost but I will double check.
1601627840481.png

you get the buff but it doesn't give you the big bump in mana

you can test this by slamming fading memories and dropping your mana, and then slapping yourself with a quiet prayer
 
Not a complaint what so ever, just a thought. I am using an 85 chanter/cleric to buff my low group, and help them out. All the ones running the plugins. I invited the cleric into group a minute, thinkin then it would just buff them as it could based on their level. Temp over Aego, etc....

It would be awesome, if there was a "PL (power Level)" option that you could check off, and have it target the group, and auto cast the best buffs based on recipient level. So, a feature request. :) And I do realize, you can BYOS, and then I just have a kissassist set up for the lower level stuff, jsut have to change the ini as the group levels. And I have become spoiled off of your plugins.
 
Much more compicated than that, if we did anything like that it would be far, far down the line. The spell data doesn't store that info directly.

And for most stuff, we are only storing what our current spell is
 
Also, for clarification, the plugins require the use of MQ2CWTNBuffs plugin to be running on the character that would like to be buffed, and for the user to be on the same system as the buffing toon.
 
Hi just wondering if this plugin supports clickies that buff group ?

I have a shield that does clicky Primal essence that I would love to buffs all melee rather than himself and refresh it.

thanks
 
Hi just wondering if this plugin supports clickies that buff group ?

I have a shield that does clicky Primal essence that I would love to buffs all melee rather than himself and refresh it.

thanks
not yet, but we've been adding stuff to the clicky functionality of the library

what item in particular just out of curiosity?

clicky cure items will be in next live update
 
Howdy

So my godess Healer has reached level 60 and i went on spell-shopping spree. Last time was at level 55. She now fires Yaulp V (level 56ish Version). The basis version without focus holds for 4 ticks, so 24 seconds. The buff shows 40 to 42ish seconds with focus. She doesen't care the focused 40ish seconds and refires after 4 ticks. Is that a bug or intentional?

Secondly i tried to /clr AddClicky Downtime with the white chain bridle (100k horse from bazaar). This resulted in permarecasting the horse. And no, i dont have autodismount enabled, since previously i clickd it manually. But after fighting spirocs who constantly threw her off the horse i wanted to add it to the buffing routine.

The last thing i wonder is, how do you emergency run out of a zone? What hotkey do you have to achieve this? Do you pause all toons and with some fancy nav command you tell them to run to zone or to the nearest clickable door. What works for you best?

cheers

Same thing happened to me today using Glowing Black Drum.
 
The raid mode and the raid assist?


Raid Mode:
/clr RaidMode true/false/on/off/0/1 - Sets if you want to use the Raid Assist instead of the Main Assist for getting valid targets.
/clr RaidAssistNum 1-3 - Sets if you should use Raid Assist 1, 2, or 3 when in RaidMode

I'm mainly wanting one to heal the group and toss out heals to a few of the tanks on my ext. Just want to make sure I don't screw it up. Go the SK going great!!! Now gonna grab the cleric next.)
 
Plugin - MQ2Cleric

Users who are viewing this thread

  • TheNextOne
Back
Top
Cart