• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Question - Making healers heal even when target is 100%

RowdyRidah

New member
Joined
Dec 8, 2013
RedCents
49¢
I basically want to be able to setup my healing to cast heals on it's main assist even if that character is at 100% essentially creating a heal cast chain, I know there was a problem that this happened in one version of KA and it was fixed but I want to know how to do it intentionally, any help is welcome and will give redcents for taking your time!
 
have you tried setting your assist to 100% and your cast heal in the buff section also at 100
 
I set my Assist under the melee section (even tho meleeing is off) to 100 yes, and in my heal section it is set to 100 as well
[Melee]
Assistat=100
<and>
Healson=1
Heals1=Reverent Light Rk.III|100
I also tried:
Heals1=Reverent Light Rk.III|100|MA

and no luck trying any of it, should I put heal cast in buff section and what syntax would I use?
 
not as HEALS, as BUFF , I recall I set mine in the buff section and it cast it over and over
 
He will only chain heal with no aggro, if there is aggro he stops the buff loop so that doesn't work
 
Try both Buffs and Heals

Buff1=Reverent Light|MA

Heal1=Reverent Light|100|MA

See if that does what you want.
 
If you set more then 1 heal to the same percent it buffers the heals and will heal even if full hp, and will cast as many heals as you have set to trigger, best would be to trigger your heals at 99% and if you pull on your MA with the hp aura going it should trigger the heal chain, i think the heal section can only be triggered if <100% health, im at work so cant see the heal section to try and find the heal max percent is.
 
First question is Why would you want to Cast heals none stop conastantly ? -

Next is - What are you trying to accomplish - so we can help you figure out what you need to do

Kiss assist is Designed to be % based assisting , So Assentially Sinn69 is correct To have your toon start heals at 100 % would be


heal1=Reverent Light|100|MA meaning when the tank drops below 100 % heal he will cast a heal

Kiss also is based off of Group % so assentially you would want to set

heal2=Reverent Light|95 So your other group mate's get a heal unless your using a back up healer then you can fill in the gaps their

I box 4 Cleric's in 4 different groups on raids , and I tell you , my Heal section of my ini is pretty spot on you
Rich (BB code):
Heals1=Virtuous Intervention|85|MA
Heals2=Burst of Life|25|MA
Heals3=Word of Reformation Rk. III|50
Heals4=Graceful Remedy Rk. III|35
Heals5=Divine Arbitration|25
Heals6=Aegis of Superior Divinity|20
Heals7=Elysian Intervention Rk. II|75
Heals8=Fifteenth Emblem Rk. III|45|MA
Heals9=Virtuous Intervention|80
Heals10=Fraught Renewal Rk. III|60
Heals11=Reverent Light Rk. III|70


For it to work correctly Remember when you set Kissassist to start heals at 100 % that's when he is going to heal if you want him to only heal MA , tag everything that way , Other wise he is gonna read MA heal and work off the group heal balance
 
Question - Making healers heal even when target is 100%

Users who are viewing this thread

Back
Top
Cart