-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
KissAssist Release KissAssist v10.0.6.4 - Creature from the Black Lagoon Edition Released 10/01/2017
- Thread starter Maskoi
- Start date
Shadowfinger
Member
- Joined
- Aug 6, 2017
- RedCents
- 50¢
Re: KissAssist v10.0.6.3 - Creature from the Black Lagoon Edition Released 09/23/201
I'm all the sudden having an issue with 6.3 pulling with MQ2Nav. I saw the update and was running in Grelleth. All the sudden i'm now getting
"Could not locate starting point on navmesh: <coords>"
It seems to work fine on 6.2, and i've been running this navmesh for a few days now. Any ideas?
I'm all the sudden having an issue with 6.3 pulling with MQ2Nav. I saw the update and was running in Grelleth. All the sudden i'm now getting
"Could not locate starting point on navmesh: <coords>"
It seems to work fine on 6.2, and i've been running this navmesh for a few days now. Any ideas?
Re: KissAssist v10.0.6.3 - Creature from the Black Lagoon Edition Released 09/23/201
In the mesh generator one of the tabs on the right will have a section where you can input a loc, you can type /loc in game and fill that in as your start point... There may be a way to do it ingame, but thats the way I do it. Sorry I cant be more descriptive on my phone atm, can give more info whrn I'm home if you are still having trouble
In the mesh generator one of the tabs on the right will have a section where you can input a loc, you can type /loc in game and fill that in as your start point... There may be a way to do it ingame, but thats the way I do it. Sorry I cant be more descriptive on my phone atm, can give more info whrn I'm home if you are still having trouble
- Joined
- Sep 12, 2004
- RedCents
- 720¢
Thats the thing tho. (just used /mlog)
it just stands there and does nothing. no logging of errors, nothing. her is the log and INI file.
Everything else works, he mezes, DPSs, and follows. But when it comes to buffs he just stands there.
- - - Updated - - -
Got to go out, will post a debug log as well when I get back
- - - Updated - - -
it just stands there and does nothing. no logging of errors, nothing. her is the log and INI file.
Everything else works, he mezes, DPSs, and follows. But when it comes to buffs he just stands there.
- - - Updated - - -
Got to go out, will post a debug log as well when I get back
- - - Updated - - -
In POK this morning, I started up Kissassist and got a macro pausing warning regarding an undefined variable error at line 7824. I found the following lines in the macro,
/if (${BuffList.Length}) {
/if (${Debugbuffs}) /echo \atDEBUGBUFFS WriteBuffsMerc: ${i}-${BuffList} \agLine#: ${Macro.CurLine}
/varset Writebufflist ${Writebufflist}|${BuffList}
And changed Debugbuffs to DebugBuffs and that seemed to take care of the problem. Hadn't seen this before as an issue.
/if (${BuffList.Length}) {
/if (${Debugbuffs}) /echo \atDEBUGBUFFS WriteBuffsMerc: ${i}-${BuffList} \agLine#: ${Macro.CurLine}
/varset Writebufflist ${Writebufflist}|${BuffList}
And changed Debugbuffs to DebugBuffs and that seemed to take care of the problem. Hadn't seen this before as an issue.
Getting a pretty constant Undefined Variable BOOL{Target on several different lines (different each time I run kiss) on my SK using Emerica's inis causing the macro to pause. Oddly enough wasn't getting this last night. I had made a few tweaks in his ini's last night but I reverted my changes today after I got the warnings and I'm still getting them. Also tried a full reinstall of MQ, still getting them.
Saw you recommend restarting the PC on someone's post... gonna try that I guess lol.
- - - Updated - - -
Log of the last one, cut out a bunch of the successful debug spam
Saw you recommend restarting the PC on someone's post... gonna try that I guess lol.
- - - Updated - - -
Rich (BB code):
[2017/10/05 09:14:54] Plugin 'mq2log' loaded.
[2017/10/05 09:16:46] MQ2Log :: Logging is ON
[2017/10/05 09:16:50] The current macro has ended.
[2017/10/05 09:16:55] [MQ2] Loading INI Info
[2017/10/05 09:16:57] MQ2Posse :: Radius is 150
[2017/10/05 09:16:57] MQ2Posse :: Friend notfications are OFF
[2017/10/05 09:16:57] MQ2Posse :: Stranger notfications are ON
[2017/10/05 09:16:57] MQ2Posse :: Enabled
[2017/10/05 09:16:57] MQ2Posse :: v1.07 :: by Sym for RedGuides.com
[2017/10/05 09:16:57] MQ2Posse :: DISABLED
[2017/10/05 09:16:57] MQ2Posse :: Radius is 300
[2017/10/05 09:16:57] MQ2Posse :: ZRadius is 30
[2017/10/05 09:16:57] MQ2Posse :: Ignore guildmates is OFF
[2017/10/05 09:16:57] MQ2Posse :: Notfications are ON
[2017/10/05 09:16:57] MQ2Posse :: Friend notfications are ON
[2017/10/05 09:16:57] MQ2Posse :: Stranger notfications are ON
[2017/10/05 09:16:57] MQ2Posse :: Audio alerts are OFF
[2017/10/05 09:16:57] MQ2Posse :: Zones to skip: poknowledge,guildhall,guildlobby,bazaar,neighborhood
[2017/10/05 09:16:57] [MQ2] SetupAdvLootVars: Reading from Loot.ini
[2017/10/05 09:16:57] [MQ2] NINJADVLOOT: AutoHater set to Xtarget1
[2017/10/05 09:16:57] [MQ2] NINJADVLOOT: Variables are set. Using Loot.ini file.
[2017/10/05 09:16:57] [MQ2] ================================
[2017/10/05 09:16:57] [MQ2] Redguides presents
[2017/10/05 09:16:57] [MQ2] KissAssist v.10.0.6.4 by Maskoi
[2017/10/05 09:16:57] [MQ2] ================================
[2017/10/05 09:16:57] [MQ2] I am Tanking & Main Assist
[2017/10/05 09:16:59] Window 'Blocked Spells' is now open.
[2017/10/05 09:17:00] Window 'Blocked Spells' is now closed.
[2017/10/05 09:17:02] [MQ2] Casting Vizat's Skin Rk. II on me.
[2017/10/05 09:17:11] [MQ2] DEBUG ALL On
[2017/10/05 09:17:44] [MQ2] DEBUGHEALS CheckHealth Enter Line#: 4141
[2017/10/05 09:17:44] WARNING: Undefined Variable BOOL{Target used on line [email protected] /declare i int local 0Macro Paused.
[2017/10/05 09:17:55] WARNING: Undefined Variable BOOL{Target used on line [email protected] /declare i int local 0Macro Paused.Log of the last one, cut out a bunch of the successful debug spam
Maskoi
old and salty
- Joined
- Sep 28, 2005
- RedCents
- 82,796¢
This has been posted. Go into your holyshits
change this line to the one below
bool is fucked up
change this line to the one below
Rich (BB code):
holyshit9=/if (${Me.AltAbilityReady[Encroaching Darkness]} && !${BOOL{Target.Snared}} && ${Target.Type.Equal[NPC]}) /alt act 826
Rich (BB code):
holyshit9=/if (${Me.AltAbilityReady[Encroaching Darkness]} && !${Target.Snared.ID} && ${Target.Type.Equal[NPC]}) /alt act 826
turtlepower
New member
- Joined
- Sep 24, 2017
- RedCents
- 154¢
Also having some issues of late. Grabbed latest version from first page; updated the snare holy for Emerika's SHD with Maskoi fix. Still getting a series of errors each time kiss is run.
[2017/10/08 08:46:52] WARNING: Undefined Variable BOOL{Target used on line [email protected] }Macro Paused.
Didnt have log on at time but also had issues with line 2151, 2279 and some others.
Mqnav is also acting up still with the "Could not locate starting point on navmesh: <coords>" spam. I reran the mesh as admin and used a starting location and still erroring out.
Thoughts? Let me know what more info I can grab you. Relatively new to MQ and Kiss.
[2017/10/08 08:46:52] WARNING: Undefined Variable BOOL{Target used on line [email protected] }Macro Paused.
Didnt have log on at time but also had issues with line 2151, 2279 and some others.
Mqnav is also acting up still with the "Could not locate starting point on navmesh: <coords>" spam. I reran the mesh as admin and used a starting location and still erroring out.
Thoughts? Let me know what more info I can grab you. Relatively new to MQ and Kiss.
- Joined
- Sep 12, 2004
- RedCents
- 720¢
Ensure you are not actively running any holyshit / downshit that utilizes BOOL as part of a state condition. There is nothing in the associated lines you are mentioning that would produce your reported errors.
Worst case scenario.. open a ticket. and post your holy/downs as part of the ticket... and especially your conditionals file if you are actively using kiss conditionals.
Worst case scenario.. open a ticket. and post your holy/downs as part of the ticket... and especially your conditionals file if you are actively using kiss conditionals.
This problem has been posted about in several other threads. The issue is in one of your holyshits.
https://www.redguides.com/community/threads/58520-targeting-issue-causes-pause?p=338306&viewfull=1#post338306
The problem with MQ2Nav can happen even with a perfect mesh. It is more dependent on where the mob is at the time you try and /nav to the location / target. MQ2Nav does not work well in water, but can be used in the water if there is a mapable path on the bottom/ground from you to the mob. MQ2Nav cannot map a path to a mob hovering high above the ground. The same goes for your character. We do use floorz when trying to check if there is a path to a mob, but if the mob is moving, then there can be issues if the mob moves to an area that is NOT pathable. I even have areas on the map, where I have blocked out areas to keep my puller out of, and/or force her to run around and take a different path. As mobs walk through the blocked out area, I get the spam as well, but once the mob walks out of the blocked area, my puller will resume pulling.
turtlepower
New member
- Joined
- Sep 24, 2017
- RedCents
- 154¢
I will tinker with it some more. Even when I wiped all of the holyshits clean something was acting up. Thanks guys.
Edit: Looks like I am dumb. Camping to char select and back seems to fix it. So I am assuming the BOOL I fixed hours ago didn't register until I had camp swapped. Thanks for all the good work around here.
Edit: Looks like I am dumb. Camping to char select and back seems to fix it. So I am assuming the BOOL I fixed hours ago didn't register until I had camp swapped. Thanks for all the good work around here.
Last edited:
turtlepower
New member
- Joined
- Sep 24, 2017
- RedCents
- 154¢
That seems to be the gist of it. Still getting used to mq2melee. I had previously pretty much only used the autorez portion of it.
Looks to me that /switch and /addignore do not work. For /switch I've pulled mobs to camp and charmed them. The group will NOT release the mob no matter how many times I type /switch. I end up killing it and charming something out of range. /addignore doesn't seem to do anything right now (ie. doesn't write to the file, doesn't ignore the mob - typically a non-aggro like "a laborer" or "a city guard").
Check your MacroQuest.ini file and make sure there is no /switch or /addignore aliases. If you find either of those aliases I would run the Remove_Aliases.mac and set your KissAssistVer ini entry to 0 on each of your characters ini file, and rerun kiss.
- Joined
- Jun 12, 2015
- RedCents
- 58,244¢
Still have isssues where it will try and summon a pet after summoning one, checked the code and in :makemypet1 and :makemypet2 i tried increasing /delay 2s ${Me.Pet.ID} to /delay 10s ${Me.Pet.ID}, but that didnt work any different, so i just added another line of /delay 10, which did the trick.
also if you do not have mq2melee loaded, doing /backoff throws up a warning and pauses.
i believe its this
it dont know Melee tlo when its not having mq2melee running i think.
probably should be something like that, but probably a more clever way to do it.
also if you do not have mq2melee loaded, doing /backoff throws up a warning and pauses.
i believe its this
Rich (BB code):
/if (${Melee.Combat}) {
/squelch /attack off
/if (${Stick.Active}) /stick off
}it dont know Melee tlo when its not having mq2melee running i think.
Rich (BB code):
/if (${Bool[${Plugin[MQ2Melee]}]}) {
/if (${Melee.Combat}) {
/squelch /attack off
/if (${Stick.Active}) /stick off
}
}probably should be something like that, but probably a more clever way to do it.
Last edited:
So I made this change and now when I type /switch I see :
Rich (BB code):
Usage: /switchchar <name>Did you refresh Injections for MQ2. Not sure what you have to do to reload your aliases, but just changing the ini file is the first step.
The switch command uses a #Bind now. You should get a message New target called!
From the member issuing the command you should target the new mob and /bcg //switch to get your group to switch.
The switch command uses a #Bind now. You should get a message New target called!
From the member issuing the command you should target the new mob and /bcg //switch to get your group to switch.
Mule pointed out a while back that /switch can conflict with mq2autologin /switchchar command which is what it looks like is happening to eqgeek... editing the mac and just renaming the bind to /switchnow fixes it... one of my standard edits when I dl a new kissassist
Maskoi
old and salty
- Joined
- Sep 28, 2005
- RedCents
- 82,796¢
i am releasing it as soon I as finish fixing the pet thing.
NoobExpert
New member
- Joined
- Nov 18, 2014
- RedCents
- 96¢
ok so i have made a few posts in the past but i am still unable to find a cause or a fix to my computer crashing. It happens every few mq2 updates. is there a way i can load the last version before this one?
notaplayer
Member
- Joined
- Jan 2, 2017
- RedCents
- 19¢
i can not, for some weird reason, get my cleric to heal my Mag's pet tank.. it's driving me crazy.. lol
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=1
Heals1=Earnest Elixir|95
Heals2=Earnest Light|90
Heals3=Frentic Renewal|85
Heals4=Thirteenth Salve|33
AutoRezOn=1
AutoRezWith=Blessing of Resurrection
XTarHeal=0
HealsSize=15
Heals11=Thirteenth Salve
Heals12=NULL
Heals13=NULL
Heals14=NULL
Heals15=NULL
XTarHeal2=0
HealGroupPetsOn=1
HealsCOn=0
Heals5=Earnest Elixir|95|Pet
Heals6=Earnest Light|90|Pet
Heals7=Frentic Renewal|85|Pet
Heals8=Thirteenth Salve|33|Pet
Heals9=NULL
Heals10=NULL
He just targets the mob and watches the pet die. He'll heal the pulled, but not the pet. I target the pet to start the macro and set the mage as the MA. I'm not sure what I'm doing wrong.
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=1
Heals1=Earnest Elixir|95
Heals2=Earnest Light|90
Heals3=Frentic Renewal|85
Heals4=Thirteenth Salve|33
AutoRezOn=1
AutoRezWith=Blessing of Resurrection
XTarHeal=0
HealsSize=15
Heals11=Thirteenth Salve
Heals12=NULL
Heals13=NULL
Heals14=NULL
Heals15=NULL
XTarHeal2=0
HealGroupPetsOn=1
HealsCOn=0
Heals5=Earnest Elixir|95|Pet
Heals6=Earnest Light|90|Pet
Heals7=Frentic Renewal|85|Pet
Heals8=Thirteenth Salve|33|Pet
Heals9=NULL
Heals10=NULL
He just targets the mob and watches the pet die. He'll heal the pulled, but not the pet. I target the pet to start the macro and set the mage as the MA. I'm not sure what I'm doing wrong.
Last edited: