• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
Guild Buff Assistant

Release Guild Buff Assistant 1.0.13

No permission to download
Join us with Level 2 access RedCents
Overview Commands Instructions Updates (13) Reviews (1) History Discussion
burdsjm said:
Is there any way to add an option to hail one of the buffers and have the other buffers react as if they were hailed as well?

Thanks!
Click to expand...
just make a hot key it fills in 2 of them and /say hail, Buffernamehere in all the lines then its 2 clicks and boom your done :D
 
Monkeyman618 said:
Hello everyone, only way i was able to get the ui to open again was to delete all files and re put in new ones if you shut the window down my minimizing it.

there should be the mac version of this updated to 125 coming out soon that iv finished am just waiting for it to be reviewed, once done you all should have a better stable version and since that is done I am going to look into figuring out what's going on in this Lua
Click to expand...

Excited to see the macro version! Been wanting a stable buff but for updated stuff for quite a while.
 
TVCChiver said:
I am trying to run this on a cleric but when I run it, this is the output. And yes, I do have those spells memmed in the gems it is saying.

View attachment 59277

Also, is there a way to turn off casting all of the spells listed? Like I only want to use the Unified Hand of Infallibility and nothing else, is there a way to disable the others? In this screen shot, it shows casting Shared Purity, even though I don't have it enabled anywhere in the gui UI, so not quite sure where that is coming from.

EDIT: Actually not sure if this can be corrected since it looks like the OP hasn't been back on the site since December. Does anybody else use anything that can act as buff bots?
Click to expand...
Have you checked out https://www.redguides.com/community/threads/mq2buffme.87870/ - similar functions
 
In order to fix the bug that breaks it once you minimize, you need to edit 1 word on line 948. Open init.Lua at ... \MacroQuest\Release\Lua\BuffBot\init.Lua
Make the correction below, save the changes and you'll be able to load it again. You can also minimize without punishment.

Incorrect: if not ShowUI then return end
Correct: if not Open then return end

Credit to brainiac
 
Either I've got a configuration problem or I don't know what i'm doing


"/Lua run buffbot" returns: "Cannot find buffbot in the filesystem"

Is that command not "buffbot"?
 
Did you watch the resource from the overview page and install it from the Lua tab on the launcher?
 
I tested and encountered the same issue. I found that buffbot didn't have it's own folder with its files inside it. You can fix it by creating a folder named BuffBot in "MacroQuest\Release\Lua\". Then move these files/folders from the Lua folder into the BuffBot folder. It should work when you /Lua run buffbot.

1713924133590.png

Be sure to correct this error before running, or avoid minimizing it.

Edit 1 word on line 948. Open init.Lua at ... \MacroQuest\Release\Lua\BuffBot\init.Lua
Make the correction below, save the changes.

Incorrect: if not ShowUI then return end
Correct: if not Open then return end
 
DEADCiTiES said:
I tested and encountered the same issue. I found that buffbot didn't have it's own folder with its files inside it. You can fix it by creating a folder named BuffBot in "MacroQuest\Release\lua\". Then move these files/folders from the Lua folder into the BuffBot folder. It should work when you /lua run buffbot.

View attachment 60737

Be sure to correct this error before running, or avoid minimizing it.

Edit 1 word on line 948. Open init.Lua at ... \MacroQuest\Release\Lua\BuffBot\init.Lua
Make the correction below, save the changes.

Incorrect: if not ShowUI then return end
Correct: if not Open then return end
Click to expand...
That did indeed fix it. Thank you!

My shammy is now buffing all who hail.
 
Is this project going to be abandoned? I like the Lua versions over mac versions personally, and attempting an all Lua UI if possible now that I am back.
 
Shadow said:
Is this project going to be abandoned? I like the LUA versions over mac versions personally, and attempting an all LUA UI if possible now that I am back.
Click to expand...
I love the Lua version myself on the guild buffers. I told the guild to make hotkeys for the Buffme plug to receive the lvl 125 buffs.
 
OK lets try this again...

Bugs:
1. if you try and minimize the buff window it will crash and you have to delete your buffer ini.s to get it to show up again
2. will cast buffs in the Lua menus even if unchecked
3. will casts buffs over and over if any stacking issues
4. will lock up due to alot of the above actions
5. not all buffs are in the correction level sections for selection

I tested this version with monkey and druid just to get it to this point.. There is a reason Monkey and I tested a new macro version.
 
anyone got the druid version to do ports ?

i keep getting no ports available, and i can't see where the program is building the druidports table of available zephyrs, the druid.Lua certainly has the functions but can't see how it gets called during setup
 
Hylander said:
anyone got the druid version to do ports ?

i keep getting no ports available, and i can't see where the program is building the druidports table of available zephyrs, the druid.lua certainly has the functions but can't see how it gets called during setup
Click to expand...

My wizard is getting the same message. I have the Translocate loaded and the Common Ports selected and enabled but when I say "ports" it says none are available.

Also... my beastlord isn't casting Shared Merciless Ferocity even though it's enabled and my mage isn't casting a mod rod even though it's enabled.

Any idea how to fix these issues? I can send snips if needed.
 
So I loaded it up first time and it was working and I clicked the arrow to minimize and I did that and it stopped it, now if I try to load it back it just shuts down and I cant get to to stay running anymore, what did I do? lol and how do I fix it thank you
 
ok so found up the other post the line to fix to get it working,
one suggestion for the enchanters would be to have glyph spray as an option too.
thank you!
 
@Monkeyman618 your file structure appears to be incorrect which is causing folks trying to use this some problems.

Please let me know if you need help fixing this
 
Monkeyman618 said:
sure if you would like to and its not to much of a problem
Click to expand...
What do you need help with exactly? I'm asking if you need help getting your resource structure fixed. I am not looking to be a collaborator, nor do I need that to be able to upload/delete etc

You need a folder named whatever your resource is, then inside that folder and init.Lua which is your main file, inside your folder where the unit.Lua is, is where your other files go
 
ok I did what you mentioned to the T but when I upload the file its looking just for a file itself and won't let me upload all the content as a whole file, how do I do this when trying to post an update? could you check this out on why I cannot upload a whole file with everything in it like this when tried to update the file, I believe that is why it was set in a zip file because of this
 
Monkeyman618 said:
ok I did what you mentioned to the T but when I upload the file its looking just for a file itself and won't let me upload all the content as a whole file, how do I do this when trying to post an update? could you check this out on why I cannot upload a whole file with everything in it like this when tried to update the file, I believe that is why it was set in a zip file because of this
Click to expand...
you just need to zip the folder now and upload that
 
Monkeyman618 updated Guild Buff Assistant with a new update entry:

Fixed some bugs and code

  1. all supported classes should cast a little faster.
  2. fixed the port issues with wizard and druid
  3. mage will now cast all pet gear
  4. working on some checks and things so try not to over hail on the druid seems to get stuck
  5. other classes seem to be doing fine on over hails,
  6. cleric purity and classes with sow and haste will seem to always cast them even if not checked to cast
  7. took out auto facing to improve timing
Working on doing more as I go, hope things...
Click to expand...

Read the rest of this update entry...
 
Not sure what I am doing wrong here. I have the script running on a druid without any errors on startup.. I have checked the box next to buffs and can get spirit of eagle to cast but trying to get a port does nothing. Hail the druid and they respond, say ports and it lists the available ports but cannot seem to get a port to cast. Read all the docs and cannot find any usage example and have tried asking for a port to knowledge as a test with Zephyr: Knowledge / Knowledge / port knowledge etc... nothing works.

Is there a manual on how to drive this somewhere that I have missed?
 
You must log in or register to reply here.
Release Guild Buff Assistant
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -