Question - Aggro section question - What do the tags do?

[blahblahblah84]

There are apparently three tags available for use in the aggro section Me, MA and Mob.

My question is this - what's the difference between the following?

Aggro1=Taunt|100|< (I assume that this uses a default tag value that probably defaults to Me)
Aggro1=Taunt|100|<|MA (I assume that MA tag will trigger the effect if the MA aggro level drops below 100)
Aggro1=Taunt|100|<|Me (I assume that Me tag will trigger the effect if my aggro drops below 100)
Aggro1=Taunt|100|<|Mob (What does this do?)

I was also wondering if these tags are case sensitive (e.g. would Ma, ma and MA would all work). I assume that the tags are probably not case sensitive since it's a scripting language ...

Sorry if these are dumb questions, but the documentation isn't really clear.

 

[Robban]

There are apparently three tags available for use in the aggro section Me, MA and Mob.

My question is this - what's the difference between the following?

Aggro1=Taunt|100|< (I assume that this uses a default tag value that probably defaults to Me)
Aggro1=Taunt|100|<|MA (I assume that MA tag will trigger the effect if the MA aggro level drops below 100)
Aggro1=Taunt|100|<|Me (I assume that Me tag will trigger the effect if my aggro drops below 100)
Aggro1=Taunt|100|<|Mob (What does this do?)

I was also wondering if these tags are case sensitive (e.g. would Ma, ma and MA would all work). I assume that the tags are probably not case sensitive since it's a scripting language ...

Sorry if these are dumb questions, but the documentation isn't really clear.

What are you referring to? a macro? Where did you find this?

 

[dafoe]

Tells you everything you need to know...

The ini... and you. A story of patience. <- click it..

 

[Robban]

just wondering where the |MA |Me and |Mob is coming from... never seen that in the Aggro section

 

[blahblahblah84]

just wondering where the |MA |Me and |Mob is coming from... never seen that in the Aggro section

It's from the Aggro section here (16) Guide - - KissAssist Instructions & Settings Info | RedGuides: EverQuest Multi-boxing Community

 

[blahblahblah84]

Tells you everything you need to know...

The ini... and you. A story of patience. <- click it..

That's where I got the list of options from. Unfortunately, the post only lists the options, not how they are implemented ... unless I missed something.

 

[Robban]

It's from the Aggro section here (16) Guide - - KissAssist Instructions & Settings Info | RedGuides: EverQuest Multi-boxing Community

weird shit @Maskoi maybe can explain them?
AA/Disc/Item/Spell|% aggro|<> less than/greater than| Me/MA/Mob cast on Target.

anyway

Examples (Gain Aggro):
Aggro1=Taunt|100|<
Aggro2=Terror of Kra`Du|100|<
Examples (Drop Aggro):
Aggro1=Sanctuary|80|>
Aggro2=Divine Peace|95|>

If you disreagard those tags, do you understand how to use the Aggro then?

as I said before, I have never seen anyone use that tags in Aggro section

Ohh, and this question maybe should have been in the KissAssist part of the forum.

 

[runcade]

A little off topic... On TLP where you don't see threat percents does this section do anything?

 

[Maskoi]

Aggro1=Taunt|100|<
If aggro is < (less than) 100 (%) use taunt

 

[eqtrader74]

Those tags will change your target as you cast the aggro spell/item. Like if you have a "drop-aggro" item and need to target yourself, |Me will switch to target yourself as you cast. Or you could Aggro boost the MA to lower your aggro, like an enchanter's +% aggro spells.

It's not on the list, but you can add |pet too if you wanted to change a pet to a "tank" type buff and have pet pull aggro.

On servers with no aggro percentage report, I don't think these have anything to calculate.

 

[Robban]

Aggro1=Taunt|100|<
If aggro is < (less than) 100 (%) use taunt

Yea, was the (Me/MA/Mob cast on Target.) I was wondering about. @eqtrader74 explained it well I think.

 

[blahblahblah84]

Thanks for the explanation eqtrader74! That was was exactly what I was looking for.