Problem - Mezzing issues

[no_one]

Here are some notes on the issue:

If I put the tank on 8.1.2 (The only other version I have) then the enchanter mezzes appropriately. I have watched the tank and he is pulling, but switching targets in 8.2.6 which he does not do in 8.1.2. With the tank on 8.1.2 and the chanter on 8.2.6 The chanter will still attempt to chain mezz any named that is pulled if there are multiple mobs. Alleviated this by adding all named mobs to mezz immune.

I will be happy to provide any additional information requested if you need something most of the developers have my skype handle, just let me know what you need to validate/ correct this issue.

Warrior ini:

[General]
KissAssistVer=8.1.2
Role=PullerTank
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=1
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedCombat=0
LootOn=0
RezAcceptOn=1
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=1
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0

[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist

[Buffs]
BuffsOn=1
Buffs1=Huntsman's Ethereal Quiver|Summon|Ethereal Arrow|200
Buffs2=Champion's Aura|Aura
Buffs3=Orange Chitin Shoulder Guards
Buffs4=Fused Coral Bow
Buffs5=Defensive Proficiency|Alt
Buffs6=Ancient Cloak of Flames
Buffs7=Imperator's Command
Buffs8=Breather|End|20
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
CheckBuffsTimer=20

[Melee]
AssistAt=100
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=off
AutoFireOn=0

[AE]
AEOn=1
AERadius=75
AE1=Roar of Challenge|2
AE2=Area Taunt|3
AE3=NULL
AE4=NULL
AE5=NULL

[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=Phantom Aggressor Rk. II|99
DPS2=Tormenting Shout|98
DPS3=NULL
DPS4=NULL
DPS5=NULL
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL

[Aggro]
AggroOn=1
Aggro1=Krondal's Roar Rk. II
Aggro2=Insult
Aggro3=NULL

[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0

[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL

[Burn]
BurnText=Decepticons Attack
BurnAllNamed=1
Burn1=Last Stand Discipline Rk. II
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL

[Pull]
PullWith=Fused Coral Bow|Ethereal Arrow
MaxRadius=250
MaxZRange=50
PullWait=0
PullRoleToggle=0
ChainPull=0
ChainPullHP=5
ChainPullPause=30|2

[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0

[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92

Enchanter ini:

[General]
KissAssistVer=8.2.6
Role=Assist
CampRadius=45
CampRadiusExceed=400
ReturnToCamp=1
ChaseAssist=0
ChaseDistance=25
MedOn=0
MedStart=25
MedCombat=0
LootOn=1
RezAcceptOn=1
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=1
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=1

[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist

[Buffs]
BuffsOn=1
Buffs1=Voice of Premeditation
Buffs2=Hastening of Sviir
Buffs3=Manastorm
Buffs4=Twincast Aura|Aura
Buffs5=Mana Reverberation Aura|Aura
Buffs6=Strong Captured Cliknar Mount Saddle|Mount
Buffs7=Phantasmal Unity|Dual|Mastermind's Rune
Buffs8=Brimstone Eminence|MA
Buffs9=Rune of Lucem|MA
Buffs10=Wand of Phantasmal Transvergence|Mana|60|75
Buffs11=Slimy Tentacle
Buffs12=Shoulderpads of Alertness
Buffs13=Mulch Fiber Belt
Buffs14=Band of Minimal Effort
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
CheckBuffsTimer=20

[Melee]
AssistAt=100
MeleeOn=0
FaceMobOn=0
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0

[GoM]
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSpell1=NULL
GoMSpell2=NULL

[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
AE6=NULL
AE7=NULL
AE8=NULL
AE9=NULL
AE10=NULL

[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=Declaration of Tashan|99
DPS2=Dreary Deeds|98|Weave
DPS3=Rune of Lucem|98|MA
DPS4=Mindcleave|92
DPS5=Chromarift|90
DPS6=Mindscythe|85
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL

[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL

[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0

[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL

[Pet]
PetOn=0
PetSpell=YourPetSpell
PetShrinkOn=0
PetShrinkSpell=Tiny Companion
PetBuffsOn=0
PetBuffs1=NULL
PetBuffs2=NULL
PetBuffs3=NULL
PetBuffs4=NULL
PetBuffs5=NULL
PetBuffs6=NULL
PetBuffs7=NULL
PetBuffs8=NULL
PetCombatOn=1
PetBreakMezSpell=NULL
PetRampPullWait=0
PetSuspend=0

[Mez]
MezOn=1
MezRadius=125
MezMinLevel=100
MezMaxLevel=108
MezStopHPs=95
MezSpell=Bewilder Rk. II
MezAESpell=Your AE Mez Spell|0
CharmOn=0
CharmMinLevel=Min Charm Spell Level
CharmMaxLevel=Max Charm Spell Level
CharmSpell=Your Charm Spell
TashSpell=Your Tash Spell
TashOn=0

[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL

[Pull]
PullWith=Melee
MaxRadius=350
MaxZRange=50
PullWait=0
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2

[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0

[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92
[WEAVE]
WEAVEOn=0
WEAVE1=NULL
WEAVE2=NULL
WEAVE3=NULL
WEAVE4=NULL
WEAVE5=NULL
WEAVE6=NULL
WEAVE7=NULL
WEAVE8=NULL
WEAVE9=NULL
WEAVE10=NULL

 

[TreeHuginDruid]

I talked to you last night on Skype about this no_one.. let me know the results please... gave you last version of production 8.2.5 to test and let me know if issue exists there... so i can do a quick windiff and see what changes may have caused your issue.. because i can not replicate it.

Only changes to mezzing were for bard in 8.2.6

 

[no_one]

I have tested for several hours using 8.2.5 and 8.2.6. I have found the following:

The issue is the same in both versions. while testing over a longer period of time I noticed the wizard also is having the same performance issue as the enchanter. ignoring the main tanks target, and targeting the add, then waiting for assist % to be reached on add. This still seems to revolve around the tank switching targets when the pull has more than 1 mob. I ran a windiff on 8.1.2, and 8.2.5 but nothing stood out to my untrained eyes.

I have received a copy of 8.2.3 from another member so I can test with that later tonight.

as reported originally I am able to maintain no issues running the tank on 8.1.2 since he does not switch targets when pulling multiples. Therefore the chanter mezzes the correct target. Not sure if you want to call this an issue with the tank or an issue with caster marking main assist target to early?

no_one

 

[Maskoi]

Are you using the official Kiss.

CharmMinLevel=Min Charm Spell Level

This is a very hacked version.

 

[no_one]

The kiss I am using is the one that came from the kiss release forum. I will pull down a new one and make all fresh ini files tonight.

- - - Updated - - -

ok fresh Kiss, and ini files. The same thing happens.. but more notes on the issue. When I pull 3+ mobs the enchanter works correctly. This only appears to be when the tank pulls 2, but after watching for some time I see why he is switching targets. Higher level mob, or mezz immune etc.. so when I pull 4 the warrior grabs the mezz immune mob, and the chanter mezzes the other 3, but when I grab 2 the chanter does not mezz the second mob.

 

[TreeHuginDruid]

Is the 2nd mob in the mezz immune list as well for that zone ???
Could always clear the mezzimmune list for that zone and let it be rebuilt manually in the kissassist_info.ini file...


You have no AEMez defined... or how many mobs constitute aemezzing versus single target mez... I've always found that aemez works great...
MezzAeSpell=MyAeMezzSpell|3 ... locks down the mobs fast under quick timer aemez spell.. then single "long duration" mezz spell is kicked in to lock each mob down for extended single mez timer.

I know that last statement doesn't help in your 2 mob in camp scenario.. but just a suggestion for future game play.

- - - Updated - - -

Grab 8.2.8 version and re-test please .... update me if its still happening... AFTER you ensure mob is not on immune list.

 

[no_one]

New Kiss version same issue. Talked to Maskoi about it earlier, and he said it is a targeting issue not a mezzing issue. However he also thinks my chanter is naturally blonde.
The issue boils down to the chanter not properly assisting the MA (who is also the puller and tank for the group). I can setup debugall and log it for you on warrior and chanter if you want me to do that tonight.

no_one

 

[TreeHuginDruid]

New Kiss version same issue. Talked to Maskoi about it earlier, and he said it is a targeting issue not a mezzing issue. However he also thinks my chanter is naturally blonde.
The issue boils down to the chanter not properly assisting the MA (who is also the puller and tank for the group). I can setup debugall and log it for you on warrior and chanter if you want me to do that tonight.

no_one

Yeah.. a full debug log file would not hurt.....
never post that though... as it contains character info... you can send it to my email... PM u shortly on that.

Targeting issues creep up from time to time.... its a b**ch to track them down without a full debug of at least 2 cycles.

- - - Updated - - -

Got your log....

Only thing concerning me is the code that does:

        | Test -> is target MA's current Target
        /if (${Spawn[${AddsMArray[${i},1]}].ID}==${MyTargetID} && ${Spawn[=${MainAssist}].ID}) {
            /if (${DebugMez}) /echo ${Spawn[${AddsMArray[${i},1]}].Name} had the same ID(${Spawn[${AddsMArray[${i},1]}].ID}) as MyTargetID(${MyTargetID}) & ${MainAssist}(${Spawn[=${MainAssist}].ID}) so im going to :SkipMez
            /goto :SkipMez
        }

Your skipping the mob mez on that target only if it is your current targetted mob ID AND the main assist's current target.id.

So... in your example from log:

[2015/07/21 13:58:01] [MQ2] an_enraged_reef_crawler01 had the same ID(17911) as MyTargetID(17911) & MainAssistNmae(18016) so im going to :SkipMez

This doesn't make sense to me... you should only skip if your targeted mob's id is the same as the MA's targetted mob id... not compoaring your target mob id to the MA's ID itself.... can't test code patch atm.. gimme until tonight.. but that should be testing :

/if (${Spawn[${AddsMArray[${i},1]}].ID}==${MyTargetID} && ${Spawn[=${MainAssist}].Target.ID})

or whatever the correct syntax is to pull back the MA's target mob id.. for comparision in the logic...
if i am right.. that is why the mez is skipping/failing.. not making the correct association for the mobsarrayvalue (1 through 13 in xtarget array build) versus the correct mob target id's.

Gotta test... but you get the idea....

- - - Updated - - -

Mobs being added to mezzimmune array properly.. that not an issue... i'm really concentrating on that issue i mentioned above... gimme a bit of time to test sh*t... i'm on the job mat.

 

[no_one]

I made the following adjustment for my situation since I always have the tank set to group main assist. I was unable to find a target member of the spawn TLO on the wiki.

| Test -> is target MA's current Target
/if (${Spawn[${AddsMArray[${i},1]}].ID}==${MyTargetID} && ${Spawn[${AddsMArray[${i},1]}].ID}==${Me.GroupAssistTarget.ID}) {
/if (${DebugMez}) /echo ${Spawn[${AddsMArray[${i},1]}].Name} had the same ID(${Spawn[${AddsMArray[${i},1]}].ID}) as MyTargetID(${MyTargetID}) & ${MainAssist}(${Me.GroupAssistTarget.ID}) so im going to :SkipMez
/goto :SkipMez

I will run the group with chanter on debug mode again tonight see what I find out.

- - - Updated - - -

making the above adjustment corrected the mezzing on the chanter. This does lead to something else related. When the chanter mezzes mob 2 she does not reacquire MA's target and assist between mezzes, instead she remains targeted on mob2 and remezzes long before mez timer should be up. I unfortunately did not have mlog on for the first double pull, but I will have more through the night. remezzing roughly every 32 seconds based on timestamps, while mez spell lasts for over a minute. perhaps that is as intended for when mezzing multiple adds.

 

[Maskoi]

I have found a fundamental flaw in my mob mez array assignment. I am not sure if this is causing the problem but it has to be fixed first. I hope to have it worked out by the weekend.

 

[no_one]

I have been running with the change I made to correct mezzing the add using debugall for roughly 8 hours if you want me to send anyone that log file.

 

[TreeHuginDruid]

I have found a fundamental flaw in my mob mez array assignment. I am not sure if this is causing the problem but it has to be fixed first. I hope to have it worked out by the weekend.

Well I'm gonna stop banging my freaking head against the wall now.... since the master found a fundamental flaw in his code..... (grumble grumble).. status changed to known bug....

 

[Slade the Magician]

I was going to post about this, but am glad to see I am not the only person having problems with mez.
If Maskoi is already working on this, then all I can do is wait patiently.

 

[TreeHuginDruid]

I was going to post about this, but am glad to see I am not the only person having problems with mez.
If Maskoi is already working on this, then all I can do is wait patiently.

Wait patiently.. with a beer in your hand... that's a better option... lol