MQ2CWTNCommons

CWTN Plugins - ALL
- added ${CWTN.MobsToPull}
-- boolean true/false if we think we have mobs we want to pull.
- Adjusted BurnCount msg output.

CWTN Plugins - ALL
- Correct some issue with Active Discs reporting back erroneously which causes stopdisc to not occur.
- If you say "reminder" to Virtuous Dusk, we will now refresh your disciplines.
- Rez Sickness and Snare pull holds were seperated from groupwatch, apologies.
- Not using clickies in safe zones has been changed to not use clickies with charges in safe zones.
-- This does not apply to burn, offensive, or defensive clickies. Yay cookie dispensers and such!
- RkII DB Purchase is now automatically Detected. There is no longer a toggle, or INI entry.
- Pullers should no longer pull if there is a group members corpse within 100 distance of you.

CWTN Plugins - ALL
- Burnnow usage will now continue to burn until you have no xtargets.
- Fixed issue where our progressive ability was missing Composite lvl 3 from the "spell" group.
- Downtime clickies will no longer happen in "safe zones".
- We will sit if we're withing our chasedistance.
- ChaseDistance can now be between 10 and 100.
- In chasemode if you have greater than 20 chasedistance, you will nav to a distance of half that value to your ma.
-- if you are a 20 or less chasedistance, you will nav to a distance of 10 (which is what it is now).
- Fix't bug while on a hill while levitating. (specificity for the win!)
- Added showclickies to commoncommand.
-- this will output all current usable clickies
--- example: /shd showclickies
- added an option to manually end "burnnow"
-- example: /rog stopburnnow would manually end your burnnow
--- this is for cases where you wanted to burn something specific, but your xtarget doesn't clear, yet you no longer wish to be in burnnow state. (think griklor raid)

CWTN Plugins - ALL
- Fixed Milas An`Rev for named check.
- Report Cast cleanup (internal).
- ChaseDistance addition.
-- users can specifify the distance at which they would like to nav to the MA during chasemode.
-- example: /ber chasedistance 50
--- this would set your chase distance to 50, and you would only nav to the MA if you are greater than or equal to 50 away.
--- ${CWTN.ChaseDistance} added.
- Added Tantor, Klandicar, and Aaryonar to the named checks.
- Added old-school chardok nameds to our named check whilst in old-school chardok.

CWTN Plugins - All
- Fixed *very* rare and even harder to find crash when using a clicky that has a pet buff.
- Puller modes will return to camp and chill if you have rez sickness.
- Extra and redundant checks to try and catch and then "beep" at users who's spellbook is reporting incorrectly to mq2 due to low frames.
-- We already check with mq2 to see if mq2 sees the window - but we're going to also check for the physical window.
-- if the physical window is open and mq2 can't see it, we're going to stand you up, warn you and /beep.
--- This of course, relies on mq2 seeing the physical window. So again, please don't run automation software with min background fps.
- Changed cast ready checks for unusual targettypes.
-- This fixes "lupine spirit" AA using the wrong distance check. (thanks targettype 51).
- Corrected issue where plugins wouldn't pull with certain items like "Velium Throwing Spear".

CWTN Plugins - All
- Target combat fix for classes (enchanter).
- Will try and send in swarm pets on non-pet classes.
- Updated a couple of missing/changed Cobalt Scar named mobs in the name check.
- Fix't the broken/missing switchwithma stuff.
- Fix't Composite disciplines not firing if you had an active disc ID.
- Added command only option "UseSwimFix" that allows you to disable swimming down to a mob
-- in case any weird movement occurs.

CWTN Plugins - ALL
- Moar smarterer:tm: progressive abilitiy selection.
- AutoRemoveIllusion will also get Group "Pact of the Wolf Form".
- We will now unload the unused "mq2kissbuffs" upon startup as it is depreciated and unsued by anyone.
- SwitchWithMA now works for toons in pullerassist mode.
- Added shmancy (fancy) handing for being underwater if your mob/camp is below you.
- Puller Modes will now wait if you are snared.

CWTN Plugins - ALL
- Updated a named check in CS.
- Fix't several spelling errors.
- Fix't issue where your left side of your arc isn't pulling correctly.
- Fix't showsettings output for paused.

CWTN Plugins - ALL
- Updated for CoV.
-- Including Nameds.
- Additional pet buffing checks.
-- We will no longer try and buff your familiar, even if eq says it is your pet.
- Additional spell validation checks.
-- This helps when a spell/trigger doesn't match what the spell says it should be.
--- which is more common than it should be.
- Adjustments for pulling checks against mobs that are in water while we're not, and vice versa.
- Zradius has been replaced by ZLow and ZHigh.
-- if you use ZRadius as a command, it will just make ZLow and ZHigh the same.
--- example: You can /shd zlow 50 and /shd zhigh 200 and you will pull from 50 below, and 200 above.
--- example: You can /shd zradius 200, and it will set your zlow and zhigh to 200.
- Fix't issue with xtarget cure clickies.
- Fix't "Zone has changed, going into X Mode" when trying to go into a puller mode after changing zones.
- Will no longer face a mob if you're still naving while in puller modes.
- MEGA Emu updates.
-- Fix't endurance check for self.
-- Fix't class check crashing.
-- Fix't "Ghost" X-Target mobs getting "stuck".

CWTN Plugins - ALL
- RaidAssistNum can now also be RaidAssist.
-- ex: /shd RaidAssist 1
- Class Window now shows "RaidAssist" as the label for RaidAssistNum
- Dropdown box for RaidAssist now shows names instead of numbers.
- Can now use text command to assign RaidAssist by name or number
-- ex: /shd raidassist BrickWall
--- Would assign "BrickWall" to be the raid assist. Will fail if the player is not a RaidAssist.
- Output now shows RaidAssists Name.
-- If no raid assist is assigned in that slot, it will be listed as "Unassigned".
- RaidAssistNum now loads correctly from the INI. (was off by 1).
- RaidAssist now correctly correlates to the RaidAssist EQ Shows if you set RaidAssist#
-- to your XTarget window. It does not however, match ${Raid.MainAssist[#]} (unless it gets updated).
- Tank modes no longer care if you have blank xtarget slots.
- updated showsettings outputs for font, show, hide, toggleui, and pause
- beta stuffs.
- Additional spell book exiting checks try counter the amount of folks who are using a too low background fps causing book issues.
-- this still functions the same - if you are in byos, or manual mode, you will still not stand back up if you open your spell book
-- and it doesn't realize you are memorizing a spell.
--- Any non-manual mode (with byos off) will automatically kick you out of the book after a short period, bugged or not.

11/20/2020
CWTN Plugins - ALL
- Added ReportAssist option.
-- ex: /shd reportassist true/false/on/off/0/1 - will set if you want "Assisting MA With..." messages.
--- particularly useful to limit output spam for classes that change targets frequently during combat.
- Added toggleui and hide commands.
-- ex: /shd hide - this will hide your cwtn UI.
-- ex: /shd toggleui - this will hide your cwtn UI if already shown; show if hidden.
- CWTN Type additions/adjustments.