Abyss
Well-known member
- Joined
- Sep 30, 2005
- RedCents
- 69¢
Been receiving a lot of messages on how to Box, or AFK Bot on TLP servers etc, heres some rough examples:
Multiboxing Tips on TLP:
Use VMWare to successfully Box on 1 PC.
https://www.vmware.com/
Use a program/tool to send commands to VM Box, use my program, or make your own or simply Alt Tab.
https://www.redguides.com/community...a-Bot-for-Agnarr-amp-Phinigel?highlight=eqbot
Use a keyboard/mouse with macro'ing capabilities IE: Razer Products (Synapse)
https://www.razerzone.com/synapse
Download MySEQ for easy pickings/named mobs and camp checks:
https://www.redguides.com/forums/th...ll-live-servers-including-Agnarr-amp-Phinigel
Afk Leveling - For Mages Tips
Use Macroing mouse/keyboard to setup autotarget/send pet and AFK.
Pre SetupScript:
Set key for cycle target ingame go to synapse
Make Keybind for /pet attack
--------------------------------------------
Initializing Script with Razer Synapse
CycleTarget Key
Send pet Key
Wait 30s (Varies per level)
Click Auto Repeat in Synapse.
Best Zones to Afk in my opinion with plenty of roaming mobs:
1-10
Neriak
Misty Thicket
10-25
South Ro the Orcs by Lake have instant respawn timers so you can effectivly kill the same mob, over and over again AFK.
You can easily figure it out 25+
6 Boxing Tips:
Example:
Warrior
Mage
Cleric
Wizard
Necro
Sham
Requirements: EQBoT
Setup EQBoT Hot Keys for Heals (Cleric/sham) DPS Spells (Mages/Necro/Wizard), Pets (Mage/Necro) all on the Warrior.
Move all toons dedicated camp spot.
Main Tank on Warrior, while using the Hotkeys on the warriors screen to autoassist dps/heal/pet send in.
6 Box AFKing
Same setup as above, but also use Razer Synapse.
Setup cycletarget hotkey on warriors screen.
Setup Razer Synapse:
Go to macro section -> Create new macro
Make sure you pick the macro for endless.
For your macro you would do for example:
1. Synapse: Press Cycletarget Hotkey once
2. Synapse: Press Hotkey for War Provoke, Taunt, Attack
3. Synapse: Press Hotkeys for EQBot (warriors screen) to send commands to other 5 toons to send in pets, assist nuke, and to cast Cheal every X amt of time.
4. Wait X Seconds (You should grasp how long it takes your toon to kill trash mobs to set this up)
5. Macros starts over again.
Easy AFK script, works best with static camp spawns, such as Goblin camps in Misty on Agnarr or Plane of fire on Phinigel
AFK Platinum Making 500pp per 30 minutes:
This is actually pretty easy with the new advanced loot menu ingame. Heres an example for Agnarr
Mage or Necro
Create Cycle Target Hotkey in game
Create Attack Pet Hotkey in game
Go to Spectre Tower in South Ro
1. Create Razer Synapse Macro
2. In the macro press Cycle Target Hotkey then Attack Pet Hotkey. Have Your advanced loot window auto loot Fine steel Scynthes etc, set synapse macro to repeat.
3. Have 6 Backpacks in inventory.
4. Go AFK, come back for full bags of weapons, run to vendor and Profit.
5. Fine Steel Scynthes for about 5pp, and each spectre drops close to 4-5plat on top of that. So you can net close to 500pp every 30-40 minutes.
6. Spectres always drop a Scynthe whether its Fine Steel, Bronze or Rusty plus Platinum themselves so you are always guaranteed money.
There are tons of camps like this in EQ that yield more platinum you can exploit.
Warping on TLPs:
This is EQ so obviously Warping is around, you don't need MacroQuest2 for it either just a free program called CheatEngine. Keep in mind, I am not sure what methods Daybreak has to detect modifying the client nor does it have the protection MQ2 has so use at own risk? Granted I have been using it for awhile now, and not yet banned.
Download Cheatengine
1. Go someplace with mountains/hills so you can easily get XYZ Coords
2. Select Float -> Scan All/Unknown
3. Type /loc
4. Type in X Loc -> Search
5. Review findings alot will be read addresses, but you will eventually find the write address as it will move your character when you edit.
6. Resume for Y, and Z addresses.
7. Once you have the XYZ write address you can use cheatengines trainer to create a dialog box you can just enter the coords, and your character will warp to said coordinates (No programming required)
8. Bingo you now have /loc warp (Yes its that easy)
Granted once you relog or exit you will have to repeat the process to find the coordinates, but you can always find the actual pointer so you will always have it even if you relog.
Multiboxing Tips on TLP:
Use VMWare to successfully Box on 1 PC.
https://www.vmware.com/
Use a program/tool to send commands to VM Box, use my program, or make your own or simply Alt Tab.
https://www.redguides.com/community...a-Bot-for-Agnarr-amp-Phinigel?highlight=eqbot
Use a keyboard/mouse with macro'ing capabilities IE: Razer Products (Synapse)
https://www.razerzone.com/synapse
Download MySEQ for easy pickings/named mobs and camp checks:
https://www.redguides.com/forums/th...ll-live-servers-including-Agnarr-amp-Phinigel
Afk Leveling - For Mages Tips
Use Macroing mouse/keyboard to setup autotarget/send pet and AFK.
Pre SetupScript:
Set key for cycle target ingame go to synapse
Make Keybind for /pet attack
--------------------------------------------
Initializing Script with Razer Synapse
CycleTarget Key
Send pet Key
Wait 30s (Varies per level)
Click Auto Repeat in Synapse.
Best Zones to Afk in my opinion with plenty of roaming mobs:
1-10
Neriak
Misty Thicket
10-25
South Ro the Orcs by Lake have instant respawn timers so you can effectivly kill the same mob, over and over again AFK.
You can easily figure it out 25+
6 Boxing Tips:
Example:
Warrior
Mage
Cleric
Wizard
Necro
Sham
Requirements: EQBoT
Setup EQBoT Hot Keys for Heals (Cleric/sham) DPS Spells (Mages/Necro/Wizard), Pets (Mage/Necro) all on the Warrior.
Move all toons dedicated camp spot.
Main Tank on Warrior, while using the Hotkeys on the warriors screen to autoassist dps/heal/pet send in.
6 Box AFKing
Same setup as above, but also use Razer Synapse.
Setup cycletarget hotkey on warriors screen.
Setup Razer Synapse:
Go to macro section -> Create new macro
Make sure you pick the macro for endless.
For your macro you would do for example:
1. Synapse: Press Cycletarget Hotkey once
2. Synapse: Press Hotkey for War Provoke, Taunt, Attack
3. Synapse: Press Hotkeys for EQBot (warriors screen) to send commands to other 5 toons to send in pets, assist nuke, and to cast Cheal every X amt of time.
4. Wait X Seconds (You should grasp how long it takes your toon to kill trash mobs to set this up)
5. Macros starts over again.
Easy AFK script, works best with static camp spawns, such as Goblin camps in Misty on Agnarr or Plane of fire on Phinigel
AFK Platinum Making 500pp per 30 minutes:
This is actually pretty easy with the new advanced loot menu ingame. Heres an example for Agnarr
Mage or Necro
Create Cycle Target Hotkey in game
Create Attack Pet Hotkey in game
Go to Spectre Tower in South Ro
1. Create Razer Synapse Macro
2. In the macro press Cycle Target Hotkey then Attack Pet Hotkey. Have Your advanced loot window auto loot Fine steel Scynthes etc, set synapse macro to repeat.
3. Have 6 Backpacks in inventory.
4. Go AFK, come back for full bags of weapons, run to vendor and Profit.
5. Fine Steel Scynthes for about 5pp, and each spectre drops close to 4-5plat on top of that. So you can net close to 500pp every 30-40 minutes.
6. Spectres always drop a Scynthe whether its Fine Steel, Bronze or Rusty plus Platinum themselves so you are always guaranteed money.
There are tons of camps like this in EQ that yield more platinum you can exploit.
Warping on TLPs:
This is EQ so obviously Warping is around, you don't need MacroQuest2 for it either just a free program called CheatEngine. Keep in mind, I am not sure what methods Daybreak has to detect modifying the client nor does it have the protection MQ2 has so use at own risk? Granted I have been using it for awhile now, and not yet banned.
Download Cheatengine
1. Go someplace with mountains/hills so you can easily get XYZ Coords
2. Select Float -> Scan All/Unknown
3. Type /loc
4. Type in X Loc -> Search
5. Review findings alot will be read addresses, but you will eventually find the write address as it will move your character when you edit.
6. Resume for Y, and Z addresses.
7. Once you have the XYZ write address you can use cheatengines trainer to create a dialog box you can just enter the coords, and your character will warp to said coordinates (No programming required)
8. Bingo you now have /loc warp (Yes its that easy)
Granted once you relog or exit you will have to repeat the process to find the coordinates, but you can always find the actual pointer so you will always have it even if you relog.
