• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Max Tradeskills while afk?

i am trying fletching. It buys the right things...then it says

"window 'merchantwnd' child 'donebutton' not found


what do i need to change to get this working?
 
You shouldn't have to do anything. As far as I know the done button was added back to the merchant window as of the last patch on Oct. 12th. Maybe the name for that button has changed but it should be working since it was added back into the xml file.
 
Hello everyone,

I used that baking macro last night to go from 152 to 191 in just about an hour. It only took that long because the macro crashed a few times. One issue was it would try to buy cheese before it poped up in the trader window (you know how it takes time to load all the items). I just increased the delay in that section and that fixed that. The other reason was it would put stacks of items in my spit. Not sure why I increased all the the delays and seemed to fix that. I have a satalite modem. Sometimes it is odd the way it lags and such.

Now I want a macro to make a bunch of vegetables. I can do it right there at dray in AS. I want it to make vegetables until I get 15 stacks for example. What could I add to the baking.mac to have it check to see how many stacks of vegetables I have and then stop?

I have already edited it to make vegetables (untested) I just want that last part. While It is probably not really worth it here I can see a use later in the future. Thanks for help.
 
doctabooboo said:
i am trying fletching. It buys the right things...then it says

"window 'merchantwnd' child 'donebutton' not found


what do i need to change to get this working?
Click to expand...

To fix the above error, you need to look inside the macro for the (( /notify MerchantWnd DoneButton leftmouseup )), and replace it with /keypress esc That should resolve your error.
 
thanks for the fix. I dont know much about code but i looked over a couple of macros that i have and where the macro needed to click 'done' i just added a line underneah it for /click left.
then i started the macro with the arrow right on the done button. that worked fine. I appreciate your help for a real fix though, thanks.

Doc
 
doc only problem is if you happen to bump your mouse or itdoesn't line up right


now they added done button back to merch windows.. i am not sure if this error will occur with the old TS macs.

by replacing the line with /keypress esc you never have to wrorry about it


almost done with smithing macs.. then its one to fletch and JC to fix and tweek those

8-)
 
I think someone asked this before, but I'm bumping it. Is there not one for tailoring?
 
Cool Army. Tailoring seems da most difficult of the skills. Quest can get you to 54 easily enough though to start with.
 
[email protected] said:
To fix the above error, you need to look inside the macro for the (( /notify MerchantWnd DoneButton leftmouseup )), and replace it with /keypress esc That should resolve your error.
Click to expand...

I have just modified the jewelcrafting one to work using this, however I find I need to put /keypress esc AFTEWR /call ClosePacks rather than before.
On the brewing mac, you do have to experiment manually until you successfully do a combine of minotaurs hero brew. After that it's cake. Smithing: all OK, except the pathing went weird on many occasions going to the forge, I ended up in a wall.
Brewing worked well, except I kept getting drunk and sometimes ended up in strange places. Not unlike real life - lol!
 
Beginning to think SOE programmers hate tailors. I'm trying to get that skill up, and not much info even from EQTraders.com, and very few good macros. Seems to be hard skill to do.
 
I have a tailoring mac or two, but they all involve farming items first, or buying em from players first. The macro just buys patterns and other bits from the vendor and does the old combine stuff etc. Of course you can get tailoring up to 54 for free doing the quest in Abysmal, that starts you off.
 
This is from memory, but I tried a number of tailoring recipes. Finally found what I think are the easiest ones...

TRIV 88 and 95: Greyhopper Hide + pattern = Greyhopper Hide Items [Boots (+2% Safe Fall - LOL)]
TRIV 115: HQ Cat Pelt + Quiver pattern = Tailored Quiver (WR 22%)

Greyhoppers are found in Marus Seru, probably other places as well. If you can quad kite, these are a piece of cake if you draw them to the western slope of MS. No mobs ever go to that side unless they are chasing you (kiting area-hang a hard left from Netherbian Lair zone in). Also the Greyhopper hides mostly rot because people think they aren't used for anything. You can always offer a reward in a /shout to exp groups and let them do the farming for you...

HQ Cats: Best place I found was East Karana on the slopes. Same old famous place for Spider Silks, only this time go for the Lions. The "Monarch" Lions and Lionesses drop a LOT of mixed LQ-MQ-HQ pelts. About 1 in 10 drops 2 HQs at a time, seems like.

Kill all Lions, though, since they drop an uncommon HQ pelt. Also, they may be placeholders for the royal versions. Beside, the LQ/MQ make leather padding if you are so inclined.
 
i can get you to 188 tailoring .. with bought items...

macro for it is easy .. BUT you have to have alot of PP...

on a side note.. Look up at stickied area..

VARIOUS TS macros.. is all updated and working macros

Poison making.. is in the works...

and maybe if someone wants .. i will make a tailoring one too

8-)
 
188 with bought items, great! Never saw THAT on EQTraders, ;~) Plat is NO issue (well, it is always an issue, but...)

Anyway, I just read your other thread, and added a reply there to please, please, PLEASE, close this old thread so idiots like me will quit bumping it and wasting a lot of time on it. Let it die a graceful death...

...and thanks, this is great stuff.
 
Hey i cant get the fletching macro to work it keeps selling after nothing to sell it wont start buying it just ends

any help please
 
Ok after you unzipp coomon file in ur macro folder what do i do now? do i copy it in my ui files or just leave it where its at?
 
seems code is out dated now, says something about not being able to recognize the close window button after its done buying from the first merchant, so when it trys to buy from the next merchant it cant because the old buy window is still open....
 
disparu said:
seems code is out dated now, says something about not being able to recognize the close window button after its done buying from the first merchant, so when it trys to buy from the next merchant it cant because the old buy window is still open....
Click to expand...
Try it with the Default UI or the old default UI some were based off those
 
Redbot said:
You have to have macroquest2 working to use these. Everyone here should be able to get MQ2 working, and I won't stand it if you don't.
Click to expand...

I think it's hilarious that a lot of people (including entire guilds) that don't play until MQ2 is updated after EQ does a patch.

Doesn't anyone else think we should just ask SoE to rename their product to EverMacroQuest and just include it with the patches as the ultimate form a customer service? Sitting here thinking about it a little more, I doubt they could even keep that "working as intended."
 
was just looking through there, will those classic UI recreations work like theoriginal?


edit: just tried three different classic UIs none of which worked
 
Doesn't anyone else think we should just ask SoE to rename their product to EverMacroQuest and just include it with the patches as the ultimate form a customer service? Sitting here thinking about it a little more, I doubt they could even keep that "working as intended."
Click to expand...

I'd much rather turn that around. Most of the MQ devs know more about the exe than the EQ devs do.
 
You must log in or register to reply here.
Max Tradeskills while afk?
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -