• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Forgotten Halls Afk Macro Gets New Expedition

I tried yesterday and it warped to get mission and back to the stone, and i even zoned in and warped to the rat spot. But once i started kiting it froze and said that it encountered a problem and the usual not going to send the crash info to sony because blah blah blah lol. I guess it still might work if you set it up to walk to all of these places? Not sure how to do that tho atm.
 
Okay, I havent ran my FHbard mac since the patch (been busy) but I have used /warp target and /fade many times, in PoValor mind you. (no one was in the zone and I was at inner) but nothing has happened yet, knock on wood. I will try my version of the FHbard (which is also posted in this thread) and let you know.
 
i ran fh w/warps yesterday, got mission, zoned in, and warped to rats, but circle was jacked, so i am guessing that the new moveutils will fix it. let ya know later.
 
Thanks, I haven't even got the new compile for mq2. fhbard was the only reason i had it. recently started doing mm's and well, 2 aa afk a night is okay, but i can do that in a monster mission in 2 hours. Not sure I want to take the risk anymore, but, never know.
 
Dunno, its up to you. I, myself, have not tried moveutils since the patch (havent had time) so im not sure on that. But I have been warping since the patch and I can say, /warp does work. and that I still have yet to be banned *knock on wood*. PoK is down on my server atm, so after that I will try moveutils and such.
 
I just used an old fh macro and instantly teleported through the world from nedaria's to halas. I did not zone, i just fell right through the world. Which means that zoning may not even be needed.. it is just used as a percaution?

It was amazing.. I started the macro after I did /echo and was falling so I /succored and ended up in halas..

btw I just started using an automacro.. it works fine, however.. how do I make it autoclick the stone to enter FH? seems not to be working..

and how do I make my alt follow the bard through the zones.

I am using afkhalls2.mac

thanks.
 
usually if there are issues with an expedition if crash server or what not you get ported to the last LDoN spot you were at, dunno why.
 
Been trying this out, it works for 10 mobs or so, but eventually I always die. I've changed the radius of the circle, and well as the warping points as someone else stated, but I am still dying.

It always seems like a lag issue to me, I'm on cable, and have 1 gig of ddr2 ram and a Radeon x700 -- I shouldnt be having the lag problem

Anyone have any sugestions ??

Thanks
 
Pretty much stopped doing this when a GM showed up in here right before Thanksgiving and said I saw you warp you will be suspended until further review. When I did a /w all GM he did not show up at all be he sure as hell was standing there talking to me. At the time I was on with 3 accounts and they only suspended the 2 that were in Vxed. I did get the toons back. He flat out told me they were watching for AFK xping players.
 
also changing the radius wont really do anything, you must also change where the circle starts. the one i use is /circle on 18 600 -150 or something around there. if you search around you will find it, and if not I can post it for you when i get home. so if you can wait a couple hours I can give you a truely awsome FH mac, with potionbelt (to keep you from dying), /fade in case u get ready to die, and l33tz
 
Cpt_Cam said:
Pretty much stopped doing this when a GM showed up in here right before Thanksgiving and said I saw you warp you will be suspended until further review. When I did a /w all GM he did not show up at all be he sure as hell was standing there talking to me. At the time I was on with 3 accounts and they only suspended the 2 that were in Vxed. I did get the toons back. He flat out told me they were watching for AFK xping players.
Click to expand...
AdvPath FTW! lol
 
ss44 that would be awesome.... PM it to me when you get a chance, I would really appreciate it. and I'm using the one stickied on the front page, not red's but the one made for FHalls


Thanks again everyone for the help :-)
 
its np. Im going to start a new thread when I get back home with it in there, because there are several versions of the FH mac found in these 18 pages here, and some people do not know which to use. I will search thru here and try and find mine, will edit what needs changed then create another thread entitled FH Bard Mac, to simplify things.
 
ss44, I found your mac on your FTP... your twist is set up 8 7 4 4 what songs do you have memmed ?
 
dont use that one, i dont think its the most up to date one. better off using the one in the thread i started. The one from my FTP was selo's, my 1 dot, then my nuke twice. now i use selo's in 1, dots in 2, 3, 4, 5. if you look at them, the most up to date one has a circle of 18. better off using the one from the other thread :p
 
hehe, forgo this thread, we dont need it any longer than it is :p start using mine lol
 
i just stumbled upon this macro and thought i'd give it a try wanted something that got the expidition too, works great up until the time to zone into FH..it targets the rock...pauses then targets self..pauses then warps to a random area in the zone and starts twisting and running..it never zones in
 
This might be your problem...

|This next bit removes you from the expdition if you still have it after
| you zone out
|Targets Eldros Danmor warps to him gets the adventure window then it
| warps back to Nideno and says forgotten halls allowing you to zone in.
|You then warp closer to the rock look at point behind the rock and
| press use or u, also you click with the mouse so you mouse needs to be
| in the center of the screen.

Or, if you wanted, you could download mq2switch, go next to the rock, type /doort and in the macro where it does "/keypress u" change it to "/switch #" where the number is what /doort tells you it is.
 
so technicly you could do this macro all the way to lvl 70 correct? seems safe enough and simple it refreshes expedition for you..so could you just leave it running and let it go until 70?
 
im running this macro, and for some reason every time the first expedition ends it doesnt zone into another one, i have the cursor over the rock when i set it up and then i dont move my mouse but every time ive started this mac it runs and zones in the first expd fine and then when i wake up or get home from work, its sitting out by the rock twisting songs.. anyone else having this problem?
 
I'll have to try on my bard sometime to see how it works and why it doesn't zone you in. Personally though, I'd prolly use mq2switch just because its more reliable than /click left and /keypress u
 
siddin said:
I'd prolly use mq2switch just because its more reliable than /click left and /keypress u
Click to expand...
if i knew how to change it, i would give it a shot lol but im horrible and sickly newbish when it comes to programming and what not
 
near the end to the mq2switch thread should be the new download for it :)

ok, you'll need to open the macro and change the following (just search for event_dzquit and replace it)

Rich (BB code): 
 Sub event_dzquit 
	/dzremove YOURNAME
	/twist off
	/delay 2s
	/target Eldros Danmor
	/warp target
	/delay 2s
	/say interested in visiting
	/delay 3s
	/target Nideno Eliagy
	/warp target
	/delay 2s
	/say Forgotten halls
	/delay 2s
	/warp loc 1544 -665 94
	/face loc 1540, -675
	/look 0
	/doortarget
	/delay 10s
	/click left
	/delay 2s
	/keypress u
	/delay 1s 
	/click left 
	/keypress u 
	/delay 10s
	/target clear
	/call indz
/return
to
Rich (BB code): 
 Sub event_dzquit 
	/dzremove YOURNAME
	/twist off
	/delay 2s
	/target Eldros Danmor
	/warp target
	/delay 2s
	/say interested in visiting
	/delay 3s
	/target Nideno Eliagy
	/warp target
	/delay 2s
	/say Forgotten halls
	/delay 2s
	/warp loc 1544 -665 94
	/face loc 1540, -675
	/look 0
/switch #	
	/delay 10s
	/target clear
	/call indz
/return
you'll need to change # to the number that you get off of doortarget.
 
the door number is 8, then it has JPCROCK800A i tried replacing # with 8, didnt work then i tried "8 JPCROCK800A" didnt work i get the error DoCommand - Couldn't parse /switch 8 JPCROCK800A (depending on if i had the JPC part added in)
 
you need to download mq2switch from the mq2switch thread than do /plugin mq2switch
it should say mq2switch loaded
after that you're good to go :)
/switch 8
would be the correct command.
 
the macro runs fine, but when i zone out of the instance after 6 hours, he just stands there twisting.

any idea what causes it? seems he is not reacting to the zone out message
 
He probably isn't. Try adding a line into the main loop to check for zone id.
 
clearly this doesn't work. /=

anyone have an idea what i should use?
 
I added a check to see who is nearby and thus it determines what zone I am in and sends an /echo Entered Zone Name, and that triggers the events, but I am using the one Army wrote since it does not use Warp, and you create your own paths.

Rich (BB code): 
:loopstart 
/doevents
/if (${SpawnCount[npc a_harindi_guide radius 100]}>0) /echo entered The Forgotten Halls
/if (${SpawnCount[npc Eldros_Danmor radius 100]}>0)  /echo START_GET_NEW
/if (${SpawnCount[npc Nideno_Eliagy radius 100]}>0)  /echo entered Nedaria
/call GMCheck
/delay 5
/goto :loopstart
 
Dim said:
/if (${Zone.NotEqual[The Forgotten Halls]})



would this work?
Click to expand...

try this.

/if (${Zone.ID}!=[The Forgotten Halls])

"!" means "not".
"=" of course means "equals".

Dirty likes red cents too.
 
You must log in or register to reply here.
Forgotten Halls Afk Macro Gets New Expedition
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -