I had eqbc not connecting on a couple toons for some reason and suddenly they stopped getting cures.Sic already addressed the class plugins. What makes you think it's a DanNet issue for KA? And what's covered by "etc"? By specific, please.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I had eqbc not connecting on a couple toons for some reason and suddenly they stopped getting cures.Sic already addressed the class plugins. What makes you think it's a DanNet issue for KA? And what's covered by "etc"? By specific, please.
Right. Wouldn't that be a KA implementation issue? I'm not gonna say DanNet is perfect, but it's been used long enough that an issue like this would've popped up by now. However, if you can put together a test to demonstrate the issue, that'll go a long way to helping identify where the breakdown might be occurring.I had eqbc not connecting on a couple toons for some reason and suddenly they stopped getting cures.
mq.cmdf('/dobserve %s -q "%s"', peer, query)
mq.cmdf('/dobserve %s -q "%s" -drop', peer, query)
the instructions tab has how to diagnose issuescan someone give me an idiot guide for connecting multiple computers? i don't understand what im doing wrong.
Did you check the instructions tab? There are some diag steps thereQuestion: VPN
I was asked to ask this question since i am having an issue with a certain plugin. I was informed that Danet doesnt work with a certain plugin due to VPN status. Although i do play and log on from work with VPN status is there an issue with VPN on dannet and if there is are there any suggestions? Thnks
You can probably just set your dnet interface on each computer to the Loopback IP.I haven't had any luck finding more information regarding this so if it's there please accept my apologies and maybe point me in the right direction. For now I'm gonna necro this year and a half old thread to ask...Is there a way to stop dannet from sending commands to another computer on the same network? (Aside from the obvious solution of unloading it or using EQBC on one of the computers instead of dannet). You see my roommate and I both play, both use RG etc. Now that I got his dannet operational for him my commands are also sending commands to his characters while he's playing and vice versa.
Edit
We would both like to continue to use Dannet but, individually. I've also tried setting up and sending commands via /dge directly to a saved dannet group and that still sent commands to the rest of the characters. Maybe I'm not understanding that process...
I can't thank you enough I guess I just wasn't understanding those instructions as being a fix for my situation. You're awesome thanks for putting up with this noobs questions!You can probably just set your dnet interface on each computer to the Loopback IP.
Instructions for settings interfaces is here: https://www.redguides.com/community/resources/mq2dannet.322/field?field=instructions.
Also Sic has instructions to do exactly that here: https://www.redguides.com/community/threads/mq2dannet.67218/page-9#post-507287
I use MQ2Status for that. Once you have status loaded on your toons, you'd just gohow do I ask all the toons if they have a specific item? i.e. I'm farming an aug "Smoldering Core of Radir" and I want to see if all my toons have it without going through every inventory
/dgga /status item "Smoldering Core of Radir"
Don't even need quotes! (Many mq things do, but not status)I use MQ2Status for that. Once you have status loaded on your toons, you'd just go/dgga /status item "Smoldering Core of Radir"
Hi:
I am having an issue with /dgge I have not seen before.
I run 3 toons, each with mercs, on 2 computers. My Pal(Tank) and Brd(Assist) on my main computer, and a Dru(Assist) on the 2nd computer. All was working good this morning, then I had internet failure. Now internet is back, but when I run my Kissassist startup macro, the character on the 2nd computer, does not respond, as in the usual script in the MQ text box is blank. It works for the Brd on my main computer. Here is the macro that I have been using which I run on the Pal (MA).
/pause 20, /dgge /mac kissassist Pulver
/dgge /chase on
Has something changed involving the /dgge command ?
Should I post the contents of my *.ini files ?
Thanks
Tried all that in the instructions in your link, but no change. Both computers show the arrow pointing to the same interface. I think it is a communication issue between computers as you said. When I say I had an internet failure, it was because my internet service provider disconnected me. I got reconnected, but maybe that changed something. I tried unloading and loading Dannet as per the instructions.It's unlikely it's a KissAssist problem and more likely a communication issue between the PCs.
Sounds like the 2nd PC is getting Dannet commands. Hard to know what internet failure is, but it may have changed an interface on the second computer. You can try running the setup for Dannet again.
Instructions here.
No, reinstalling redguides won't help anything.Tried all that in the instructions in your link, but no change. Both computers show the arrow pointing to the same interface. I think it is a communication issue between computers as you said. When I say I had an internet failure, it was because my internet service provider disconnected me. I got reconnected, but maybe that changed something. I tried unloading and loading Dannet as per the instructions.
Do you think uninstalling and reinstalling Red Guides would do anything ?
/dnet info
. No. My main computer shows the 2 characters that are logged in on that computer, and my 2nd computer shows the 1 character that is on that computer. Computers are not seeing each other.No, reinstalling redguides won't help anything.
With all of your toons logged in on both computers and dannet running on everyone, from your main toon type/dnet info
.
Does the output in the MQ window show all of your toons?
They are set to the loopback IP, which only allows the computer to communicate with itself.2nd computer snip
I'm in the same boat. I really would love to use Dannet on Crossover, but not sure what to do to help. I tried giving elevated permissions (since I assume it's trying to create a raw socket) but that just made it so Crossover doesn't work at all. I have disabled firewalls on computers and Antivirus. As PredUFu mentioned, if any plugin tries to load dannet its a hard freeze. As long as I delete the plugin from the directory every time I update, everything else works fine. EQBC is working for me, but when leveling a new toon, I would much rather use something like RGMercs so I don't have to invest a lot of time into an ini that will be out of date every 20 minutes.I'm also having issues with MQ2DanNet on on Crossover/Wine. When the plugin is loaded it hard crashes, freezes EQ. Anything I can do to help diagnose or troubleshoot?
I have 2 Macs, one is M1 and the other is Intel. Unfortunately its the same on both.Actually, after a quick Google, I see that zmq only added amd64 (M1) support in November. That's almost certainly why it isn't working on an M1 Mac
I think this is correct in doing some digging, it seems like these types of freezes happen when wine tries to do something the OS requires sudo for. Unfortunately, the plumbing that linux has for allowing specific binaries the ability to elevate specific commands doesn't work the same in macOS. I tried to tinker with the commands that wine recommends for linux, but it only made things worse, to I reverted my changes and am still trying to find an answer. The problem for me is that whatever its doing seems to freeze wine and everything its running, so I haven't been able to figure out what dannet is actually trying to do at the moment it freezes, so I have been going down the assumption it has to do with sockets. I could be completely off, but started there due to the overwhelming number of posts about people crashing wine with raw socket requests.When I wrote this, I did test using wine. That was a very long time ago. I would probably have to set that up again to test, but I'm wondering if it's a Mac specific issue.
This makes Dannet fun!Hi,
I have one RedGuides account and I am running two computers. One has my 6 toons on it and the other is being used by my girlfriend and she has her 6 toons on it. We have run into a complexing issue. I think that the MQ program is somehow linking the two computers and I don't know how to delink them and it is causing multiple deaths and lots of frustrations.
When using the command "/dge /mac kissassist" or "/dge /end" on computer 1, the program is issuing the same command on computer 2, affecting all the other toons in the other group. This is happening with many of the other commands too. Is there any way to stop this? or a different way to write the commands that will only affect the group on one computer and not on the other computer? Currently I am using an indvidual hotkey on each toon but would like to do a group command, if possible.
Thanks