-
Hail, we're RedGuides. We want you to play six (yes, 6!) EverQuest characters at once. We have scripts and a friendly community to help, please join our playstyle and say hello! 👋
Problem - mage, pet and cleric merc...
- Thread starter fleeper99
- Start date
I am assuming the mage is the puller and her pet will tank.
I think you target the pet and enter the following command.
On the mage do this:
/mac kissassist.mac pullerpettank
If you are pulling with a different character then target tank:
/mac kissassist.mac puller
on others:
/mac kissassist.mac assist
I think you target the pet and enter the following command.
On the mage do this:
/mac kissassist.mac pullerpettank
If you are pulling with a different character then target tank:
/mac kissassist.mac puller
on others:
/mac kissassist.mac assist
I will try that. Thanks!
- - - Updated - - -
Ok, I am in Valley of Lunayan an I also have enchanter box with me who also has cleric merc. I typed /mac kissassist.mac pullerpettank and got message that i am puller and pet is tank. I also did the /mac kissasist on the enchanter and it just stated that he is an enchanter. I ran the group to middle of some farmers and nothing has happened. How do I get my character or any of them to auto pull the farmers and have the group attack and kill them? I am missing something here.
Thanks again.
- - - Updated - - -
Okay, I sicced pet and my character ran in and then ran way far out and never casted. How can i get mage to cast?
- - - Updated - - -
Ok, I am in Valley of Lunayan an I also have enchanter box with me who also has cleric merc. I typed /mac kissassist.mac pullerpettank and got message that i am puller and pet is tank. I also did the /mac kissasist on the enchanter and it just stated that he is an enchanter. I ran the group to middle of some farmers and nothing has happened. How do I get my character or any of them to auto pull the farmers and have the group attack and kill them? I am missing something here.
Thanks again.
- - - Updated - - -
Okay, I sicced pet and my character ran in and then ran way far out and never casted. How can i get mage to cast?
For clarity sake ... please tell me what classes your group consists of.... and WHAT you want each character to do . . . . .
Someone has the be the puller.. someone has to be the tank... all others should be assisting....
If you are using a mage and want him as the puller and to pet tank... then mage must be started with "/macro kissassist pullerpettank"
THe enchaznter must use assist... and specify the assist at % of mob health..... "/macro kissassist assist [TOON_Name_To_Assist] %" --> "/macro kissassist assist JoeBlow 97" to assist JoeBlow when mob reaches 97% hit points.
It's just as ctaylor22 said . . .
If any of your toons (enchanter) are running to a location then running back to the location where you started kissassist on them... then most likely you have both ChaseAssist set to 1 (chase the main assist around).. and also have ReturnToCamp set to one.. (return to camp radius if i exceed CampRadius). This causes the toon to ping pong back and forth... you either need to have ChaseAssist=0 AND ReturnToCamp=1 (to always return to camp after kills and not chase the MA around)...... or have ChaseAssist=1 AND ReturnToCamp=0 (to chase the MA around and not try to return to camp... (the location where you started the macro on that toon)).
This is all clearly defined in the manual under GENERAL section . . . . . . . . . LINK TO MANUAL IN THE Read the Friendly Manual FORUM
If your mage is not casting anything.... uhhm... do you have your DPS section setup correctly ??? again.. RTFM.
When running kissassist in pullerpettank mode on mage..... issue a "/kisscheck" command... it will tell you if your DPS section has errors in it as far as spelling of the spell name or other info.
I think i touched base on all the issues you mentioned.... There is a bit of a learning curve you need to get caught up with in kissassist... but all the information is logical and makes sense once you actually read the manual.
If you still having issues.... then please Make an official problem report in the KissAssist Support Forum .. and follow the required guidelines for making a problem report as outlined in the POLICY sticky there.
102 mage with cleric merc, and 85 chanter with cleric merc. I would like the mage to pull with malosenia AA if possible, sic pet and then assist with DD's. The chanter can assist at like 90%. My mage is just ping ponging as you described. I will read the manual and see if I can figure out how to stop that. Is it even possible to move through a camp like Valley killing farmers without the mage running back the point where you started?
Thanks for the advice and info. Much appreciated.
For mage to pull with that aa have the following in your KissAssist_ToonNAme.ini file.
Rich (BB code):
[Pull]
PullWith=maloseniaTo have Enchanter assist at 90%:
/macro kissassist assist TOON_NAME_TO_ASSIST 90
Are you looking to have a roaming camp??? Meaning the mage goes off and starts pulling and pettanking.. then never returns to camp.. but just goes after the next closest mob..... etc etc while the chanter follows the mage around...
If that is the case.... in mages KissAssist_ToonNAme.ini make sure ChaseAssist and ReturnToCamp are both set to 0
While the enchanter is set to ChaseAssist=1 and ReturnToCamp=0
To specifically hunt and kill farmers (only).. add every farmer type mob name to your KissAssist_Info.ini for that zone's section.
Example:
Rich (BB code):
[Valley of Lunanyn]
MobsToPull=a farmer,a tired farmerI'll assume that your DPS issue was resolved once you did a /kisscheck or read the manual.
This is a borderline support issue.. and should require a problem support ticket.. but I'm split on my decision to move this to the KissAssist Support sub forum and make it an official problem ticket.
Reason being . . . it appears to be 99% of a misconfiguration issue in your ini due to lack of familiarity with the macro settings.
ANY further questions or issues you have for your toons... and I will convert/move this to a ticket in the support forum.
Reason: Your issues and our resolution may help others with same problems.. and reduce/eliminate related support tickets (if people actually review the support forum for answers before they open a ticket.. lol )
I am still not having too much luck. I made the changes I thought I should make and logged back in. I typed /mac kissasist.mac pullerpettank and nothing happened. I sicced pet and then my character stated ping ponging again and I am not sure why; I made the changes (I thought) you told me to make. Second mob I went to my character finally cast malo spell but still ping ponged and never cast anything else.
Also, my pet goes automatically goes to guard instead of follow so it runs back to origin spot and if add comes up during fight it does not engage. I am copying what I have in the ini file for my character. Maybe this will help.
[General]
KissAssistVer=7.6.7
Role=Assist
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=25
MedCombat=0
LootOn=0
RezAcceptOn=0
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=0
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0
[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist
[Buffs]
BuffsOn=0
Buffs1=NULL
Buffs2=NULL
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
ChecKBuffsTimer=20
[Melee]
AssistAt=95
MeleeOn=0
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0
[GoM]
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSpell1=NULL
GoMSpell2=NULL
[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=relentless servant
DPS2=blistersteel malosenia
DPS3=spear of blistersteel
DPS4=bolt of moltenshieldstone
DPS5=relentless servant
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0
[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL
[Pet]
PetOn=1
PetSpell=YourPetSpell
PetFocus=NULL
PetShrinkOn=0
PetShrinkSpell=Tiny Companion
PetBuffsOn=0
PetBuffs1=NULL
PetBuffs2=NULL
PetBuffs3=NULL
PetBuffs4=NULL
PetBuffs5=NULL
PetBuffs6=NULL
PetBuffs7=NULL
PetBuffs8=NULL
PetToysOn=0
PetToys1=NULL
PetToys2=NULL
PetToys3=NULL
PetToys4=NULL
PetToys5=NULL
PetToys6=NULL
PetToysGave=NULL
PetBreakMezSpell=NULL
PetRampPullWait=0
PetSuspend=0
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
[Pull]
PullWith=Malosinete
MaxRadius=350
MaxZRange=50
PullWait=0
PullRoleToggle=0
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92
If anything jumps out to you please let me know. Thanks.
Also, my pet goes automatically goes to guard instead of follow so it runs back to origin spot and if add comes up during fight it does not engage. I am copying what I have in the ini file for my character. Maybe this will help.
[General]
KissAssistVer=7.6.7
Role=Assist
CampRadius=30
CampRadiusExceed=400
ReturnToCamp=0
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=25
MedCombat=0
LootOn=0
RezAcceptOn=0
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=0
IRCOn=0
MiscGem=8
HoTTOn=0
CampfireOn=0
[SpellSet]
LoadSpellSet=0
SpellSetName=KissAssist
[Buffs]
BuffsOn=0
Buffs1=NULL
Buffs2=NULL
Buffs3=NULL
Buffs4=NULL
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
ChecKBuffsTimer=20
[Melee]
AssistAt=95
MeleeOn=0
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0
[GoM]
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSpell1=NULL
GoMSpell2=NULL
[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=relentless servant
DPS2=blistersteel malosenia
DPS3=spear of blistersteel
DPS4=bolt of moltenshieldstone
DPS5=relentless servant
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
XTarHeal=0
[Cures]
CuresOn=0
Cures1=NULL
Cures2=NULL
Cures3=NULL
[Pet]
PetOn=1
PetSpell=YourPetSpell
PetFocus=NULL
PetShrinkOn=0
PetShrinkSpell=Tiny Companion
PetBuffsOn=0
PetBuffs1=NULL
PetBuffs2=NULL
PetBuffs3=NULL
PetBuffs4=NULL
PetBuffs5=NULL
PetBuffs6=NULL
PetBuffs7=NULL
PetBuffs8=NULL
PetToysOn=0
PetToys1=NULL
PetToys2=NULL
PetToys3=NULL
PetToys4=NULL
PetToys5=NULL
PetToys6=NULL
PetToysGave=NULL
PetBreakMezSpell=NULL
PetRampPullWait=0
PetSuspend=0
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=0
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
Burn7=NULL
Burn8=NULL
Burn9=NULL
Burn10=NULL
Burn11=NULL
Burn12=NULL
Burn13=NULL
Burn14=NULL
Burn15=NULL
[Pull]
PullWith=Malosinete
MaxRadius=350
MaxZRange=50
PullWait=0
PullRoleToggle=0
[AFKTools]
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
AFKToolsOn=0
AFKGMAction=1
AFKPCRadius=150
CampOnDeath=0
ClickBacktoCamp=0
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92
If anything jumps out to you please let me know. Thanks.
1) Do me a favor... on the mage.. make a social hotkey with the following in it.
Start kissassist on the mage with this please. "/macro KissAssist PullerPetTank MYTOONNAME" so if your mage is called FunkySmeelinMage ... the first line of the social hotkey would be:
Rich (BB code):
/macro KissAssist PullerPetTank FunkySmeelinMageUse that to start the mage in PullerPetTank mode. and let me know if specifying the name of your toon on that start changes anything.
2) I take it you didn't actually RTFM... your mage is doing nothing because you have your DPS section setup wrong. You need to specify a hitpoint% for the spell to fire at.
Rich (BB code):
[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=relentless servant|95
DPS2=blistersteel malosenia|93
DPS3=spear of blistersteel|91
DPS4=bolt of moltenshieldstone|89
DPS5=relentless servant|87
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL3) If he is PulletPetTank ... and you are pulling to a static camp....then he NEEDS to have ReturnToCamp=1
Without this... its going to F up all the time.
If its a roaming camp... then do as I suggested in the above post.
Converting this to a problem ticket.
Last edited:
Here is a copy of MY personal KissAssist_[ToonName].ini, compare it in regards to the GENERAL .. PULL .. DPS.. sections. To get a better understanding of a properly configured ini for PullerPetTank role.
This is for my level 105 mage.
Remember.. its specific to my spells/burns/items/abilites.... its just an example of a properly configured/working PullerPetTank ini for a mage.
As a playing preference.. I wait for my spawned rampage pet and Host of Elements aa pets to despawn before next pull, thats why I have PetRampPullWait=1
I also prefer to toggle puller mode when I pull .. to keep my cleric merc in camp when i pull so she does not folow/heal me on a pull and draw agro. So i have PullRoleToggle=1
This is for my level 105 mage.
Remember.. its specific to my spells/burns/items/abilites.... its just an example of a properly configured/working PullerPetTank ini for a mage.
As a playing preference.. I wait for my spawned rampage pet and Host of Elements aa pets to despawn before next pull, thats why I have PetRampPullWait=1
I also prefer to toggle puller mode when I pull .. to keep my cleric merc in camp when i pull so she does not folow/heal me on a pull and draw agro. So i have PullRoleToggle=1
Rich (BB code):
[General]
KissAssistVer=7.6.7
Role=pullerpettank
AcceptInvitesOn=1
CampRadius=65
CampRadiusExceed=200
CampfireOn=0
ChaseAssist=0
ReturnToCamp=1
ChaseDistance=25
EQBCOn=0
GroupWatchOn=1
HoTTOn=0
IRCOn=0
LootOn=0
MedCombat=1
MedOn=1
MedStart=25
MiscGem=8
RezAcceptOn=1
[Buffs]
BuffsOn=1
Buffs1=Shield of the Pellarus
Buffs2=Dark Symbiosis|Dual|Dark Symbiosis Recourse
Buffs3=Praetorian Guardian
Buffs4=Shield of Consequence Rk. II
Buffs5=Elemental Barrier
Buffs6=Arcane Distillect Rk. II|Aura|0
Buffs7=Circle of Flameweaving
Buffs8=Gather Magnitude Rk. III|Mana|55
Buffs9=Chaotic Benefaction Rk. II
Buffs10=Miniature Horn of Unity|Mana|60
Buffs11=Mana Reserve|Mana|19
Buffs12=Wand of Dark Modulation Rk. II|Summon|Wand of Pelagic Modulation|1
Buffs13=Wand of Pelagic Modulation|Mana|60
Buffs14=Large Modulation Shard|Summon|Summoned: Large Modulation Shard|1
Buffs15=Summoned: Large Modulation Shard|Mana|50
Buffs16=Mage's Severed Hand|Mount
Buffs17=Group Perfected Levitation
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
RebuffOn=1
ChecKBuffsTimer=30
[Melee]
AssistAt=99
MeleeOn=0
FaceMobOn=1
MeleeDistance=185
StickHow=snaproll
AutoFireOn=0
[DPS]
DPSOn=1
DPSSkip=0
DPSInterval=0
DPS1=Malosinete|97
DPS2=Banestrike|95
DPS3=Force of Elements|93
DPS4=Twincast Rk. III|91
DPS5=Remorseless Servant|89
DPS6=Bolt of Molten Shieldstone|87
DPS7=Spear of Molten Shieldstone|85
DPS8=Spear of Blistersteel Rk. III|83
DPS9=Thaumatize Pet Rk. III|81
DPS10=NULL
DPS11=NULL
DPS12=NULL
DPS13=NULL
DPS14=NULL
DPS15=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=1
Heals1=Renewal of Calix|65|Pet
Heals2=Promised Invigoration|55|Pet
Heals3=NULL
Heals4=NULL
Heals5=NULL
Heals6=NULL
Heals7=NULL
Heals8=NULL
Heals9=NULL
Heals10=NULL
XTarHeal=0
[Pet]
PetOn=1
PetSpell=Convocation of Water
PetFocus=NULL
PetShrinkOn=1
PetShrinkSpell=Diminutive Companion
PetBuffsOn=1
PetBuffs1=Velocity
PetBuffs2=Burnout XII Rk. II
PetBuffs3=Iceflame Armaments
PetBuffs4=Focus of Primal Elements
PetBuffs5=NULL
PetBuffs6=NULL
PetBuffs7=NULL
PetBuffs8=NULL
PetToysOn=0
PetToys1=Grant Frightforged Armaments|Summoned: Thalassic Ragesword|Summoned: Thalassic Shortsword
PetToys2=Grant Visor of Gobeker
PetToys3=Grant Thassis' Plate
PetToys4=Grant Calix's Heirlooms
PetToys5=NULL
PetToys6=NULL
PetToys7=NULL
PetToys8=NULL
PetToys9=NULL
PetToys10=NULL
PetToysGave=NULL
PetBreakMezSpell=Spear of Blistersteel Rk. III
PetRampPullWait=1
PetSuspend=0
[Merc]
MercOn=1
MercAssistAt=97
Help=To use: Turn off Auto Assist in Manage Mercenary Window
[Burn]
BurnText=Decepticons Attack
BurnAllNamed=1
Burn1=Fortify Companion|pet
Burn2=Aegis of Kildrukaun|pet
Burn3=Frenzied Burnout|pet
Burn4=Host in the Shell|pet
Burn5=Virulent Talon|pet
Burn6=Host of the Elements|Mob
Burn7=Arcane Whisper
Burn8=Silent Casting
Burn9=Empowered Focus of Arcanum
Burn10=Elemental Union
Burn11=Fundament: First Spire of the Elements
Burn12=Fire Core
Burn13=Manifested Etheric Robe of the Conjuror
Burn14=Vicious Rabbit|Mob
Burn15=Bottled Essence of Vex|Mob
[AFKTools]
AFKToolsOn=1
AFKGMAction=/quit
AFKPCRadius=150
AFKHelp=AFKGMAction=0 Off, 1 Pause Macro, 2 End Macro, 3 Unload MQ2, 4 Quit Game
CampOnDeath=0
ClickBacktoCamp=0
[GoM]
GoMSHelp=Format - Spell|Target, MA Me or Mob, i.e. Rampaging Servant Rk. II|Mob
GoMSpell1=Remorseless Servant|Mob
GoMSpell2=Spear of Molten Shieldstone|Mob
;GoMSpell1=Relentless Servant|Mob
[AE]
AEOn=0
AERadius=50
AE1=NULL
AE2=NULL
AE3=NULL
AE4=NULL
AE5=NULL
[Cures]
CuresOn=0
Cures=NULL
Cures1=NULL
Cures2=NULL
Cures3=NULL
[Aggro]
AggroOn=0
Aggro1=NULL
Aggro2=NULL
Aggro3=NULL
[SpellSet]
SpellSetName=KissAssist
LoadSpellSet=1
[Pull]
PullWith=Pet
MaxRadius=950
MaxZRange=50
PullWait=1
PullRoleToggle=1
Last edited:
Ok, I tried the command you said and that did seem to help. I changed my dps and my character began to cast. A few glitches still though. I am using the pet to pull and it will run past two farmers and pull a third past the other two and end up dragging all three to me. This seems a little dangerous. Is there a better camp for levels 102-105? Or a safe camp? I don't think I could leave my character afk camping these mobs and survive. Thanks for all of the advice and help.
Are the 2 farmers he is running past to get to a third farther back on the same z level (height level) or are they on a ridge line just above you ?
Off the top of my head... without seeing/knowing the specifics of your camp location.. the only thing i can think of at the moment is this:
If this is the case, It could be possable that what is going on is that that the function for assembling the list of mobs in pull radius is ignoring the 2 mobs close by on the ledge because they are higher up in eleveation above your Z radius configuration.
Example: Mob 1 and 2 are on the ridge just to your side.. 51 feet above you... but your "MaxZRange=50". Therefore it is ignoring them because they are just above the limit of height limit for your pull array.
Mob 3 is within this z range but when you pull him back to camp location.. he runs close enough to the other 2 mobs that they agro on mob3's pull back path.
Again.. this is only a theoretical guess.. since I don't know the exact details of the camp location and the pull path.
The Pulling problem is that you are not using MQ2Navigation for pulling. If you DON'T use MQ2Navigation the macro chooses mobs by LineOfSight(LOS) and the first 2 mobs are not LOS and the third is. You may be able to see the first 2 mobs, but if there is a bush, hill or any obstruction that is knee high to waist high between you and the mob the SpawnSearch TLO will return that the mob is NOT LOS.
and what THD said applies as well.
and what THD said applies as well.
The NearestSpawn TLO is used when selecting a mob to pull, either the 2 closer mobs are on your ignore mobs list or the closer mobs are not line of sight for some reason. What you can to test the LOS on a mob just target the mob you want to check and enter this command in the MQ2 window. /echo ${Target.LineOfSight}
This will return true if the mob is LOS and false if not.
This will return true if the mob is LOS and false if not.
Original issue for which this thread was started was resolved. Tangent follow-up questions that followed are not part of the original problem ticket.
- Status