Command:/clr

From the wonderful RedGuides Wiki

This command is added by MQ2Cleric

Syntax Key
Notation Description
Text without brackets or braces Required items
<Text inside angle brackets> Placeholder for which you must supply a value
[Text inside square brackets] Optional items
Vertical bar (|) Separator for mutually exclusive items; choose one
{Text | inside | braces} Set of required items; choose one
Ellipsis () Items that can be repeated
Syntax /clr [option] [setting]
Description Your class ShortName is your / command prefix.

Options

Category Option Description
Basic Help Shows the help menu
Show Shows the CWTN UI window
Hide Hides the CWTN UI window
Toggleui Toggles visibility of the CWTN UI Window
Reload Updates the skills/abilities/discs, updates clickies from the INI etc.
ShowSettings Will output all the settings and their current values (IE: On/Off/true/false/their number value)
Missing Shows what spells/tomes/abilities you are missing
Pause [option] Pauses the plugin from doing anything.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
Mode [option]
  • Mode [no option] - Tells you your current mode.
  • Mode [1|Assist] - Assist your MA and returns to camp.
  • Mode [2|ChaseAssist] - Chases and assists your MA. Will sit/stand based on your MA's sit/stand state.
  • Mode [3|Vorpal] - Assist but no camp or chase. Will sit/stand based on your MA's sit/stand state.
  • Mode [4|Tank] - Tank Mode
  • Mode [5|PullerTank] - Will pull, return to camp, and then tank.
  • Mode [6|PullerAssist] - Will pull, return to camp, then assist your MA.
  • Mode [7|SicTank] - Sets a camp, and will tank inside the camp, but doesn't return to camp or sit down automatically.
  • Mode [8|HunterTank] - Goes to mob, tanks and kills on location, then continues to next mob.
RaidMode [option] Sets if you want to use the Raid Assist instead of the Main Assist for getting valid targets.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
RaidAssistNum [option] Sets if you should use Raid Assist 1, 2, or 3 when in RaidMode
  • [no option] - Reports what your RaidAssist value is set to.
  • [1] - Assist RaidAssist 1 in RaidMode.
  • [2] - Assist RaidAssist 2 in RaidMode.
  • [3] - Assist RaidAssist 3 in RaidmMode.
Pulling CampRadius [option] This is your "camp radius", your "red circle" on your map where you will look to attack things inside of.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
DisablePullAbility [option] Allows you to disable the assigned pull ability
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
Radius [option] Radius is your "Pull Radius" or "Blue Circle"
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
zRadius [option] This is your vertical pull distance above and below.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
zHigh [option] This is your vertical pull distance above.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
zLow [option] This is your vertical pull distance below.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
CampOverlapBuffer [option] is the distance out of Camp to help group members (assigned puller excluded).
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
DoCampfire [option] Will drop a campfire. Does not automatically return to it.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
CampfireDistance [option] Create a new campfire if campfire is more than this distance from camp.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
Ignore [optional] Adds your target or typed name to the pullignores.ini - will skip this mob in the pull routine.
  • [no option] - Adds your target from your pullignores.ini file.
  • [option] - Adds the typed name from your pullignores.ini file.
Unignore [option] Removes your target or typed name from your pullignores.ini file.
  • [no option] - removes your target from your pullignores.ini file.
  • [option] - removes the typed name from your pullignores.ini file.
ShowIgnore Outputs a list of NPC's being ignored. May show the previous zone if you haven't gone into puller mode in your current zone.
Groupwatch [option] Who you would like to "Group Watch" in your pull settings.

You always watch yourself.

  • [1|Everyone] - Everyone
  • [2|CC&Healer] - Bard, Cleric, Druid, Enchanter, Shaman
  • [3|Healer] - Cleric, Druid, Shaman
  • [4|Self] - Self only
HpMedStart [option] This is the health value you want to start "groupwatching" at.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
HpMedEnd [option] This is the health value you want to stop "groupwatching" at.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
ManaMedStart [option] This is the mana value you want to start "groupwatching" at.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
ManaMedEnd [option] This is the mana value you want to stop "groupwatching" at.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
EndMedStart [option] This is the endurance value you want to start "groupwatching" at.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
EndMedEnd [option] This is the endurance value you want to stop "groupwatching" at.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
LevelMin [option] The lowest level NPC you want to pull.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
LevelMax [option] The highest level NPC you want to pull.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
PullArc [option] Sets an arc in the direction of your camp heading to the degrees provided. Shows the Arc on the map displaying that area.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
GoToCamp Returns back to your camp. Useful if you're in SicTank mode and want to press 1 button to return back to your camp.
DebugPull [option] Spits out debug of spawns and why you're not pulling them.
  • [on] - spam cycles you with debug information. DON'T USE
  • [on once] - will spit out 1 cycle of debug information.
General AutoAssistAt [option] This is the value you assist your MA at. 0-100 are valid.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
AutoDismount [option] Automatically dismount from your horse
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
AutoRemoveInvul [option] Automatically remove invulnerability buffs like "Touch of the Divine" and similar.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
AutoStandOnFeign [option] Automatically stand up if you are feigned.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseAoE [option] Use Aoe Abilities based on my AoE Count.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
AOECount [option] The number of spawns on my xtarget to use aoe abilities.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
BeepOnNamed [option] Beep while engaging a named mob in a tanking mode.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
BurnCount [option] Use burns at or above this number of mobs on XTarget.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
BurnAllNamed [option] Burn while fighting a named.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
BurnAlways [option] Burn all the time.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
BurnNow Will force burn the mob you're fighting.
StopBurnNow Will force stop a "Burn Now".
ChaseDistance [option] The distance at which you would like to move toward your MA while in chase mode.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
UseAlliance [option] Use your alliance ability with 3 or more class members.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
ForceAlliance Forces use of alliance irrespective of class count.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
StickSelection [option] Changes which "stick selection" you want to use for assist modes. Valid # are 0-9
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
SwitchWithMA [option] Swap targets when your MA swaps.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UpdateWinTitle Sets if you want your EQ Window Title to get updated by the plugin
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseCures [option] Use Cures including cure clickies
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseStick [option] Sets if you want the plugin to use MQ2MoveUtils to stick to a mob.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseSwimFix [option] Will swim down to a mob to engage.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseGlyph [options] Set if you want to use Glyph during burn. Will use Destruction for non-tanking, and Dragon for tanking
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
Clickies AddClicky [option] Will add an item you are holding to the specified addclicky [option].
  • [Downtime] - when we're downtime (not fighting, not invis, etc.), and we are missing the buff from the item.
  • [Defensive] - when you are the target of the target you are fighting, and we are missing the buff from the item.
  • [Offensive] - when you are fighting, and we are missing the buff from the item.
  • [Burn] - when you are burning (burnallnamed and target is named, burn always, or xtargets is more or equal to burncount), and we are missing the buff from the item.
  • [Summon] - item that summons items, when we have less than our summoncount for that summon item (done during downtime)
  • [ShrinkGroup] - shrinks group members (you can add a pet shink in here now and it will use it to shrink your pet, if you have one).
  • [PullItem] - uses this clicky to pull with.
  • [ManaGroup] - Used when a group member is below 60 mana (currently not adjustable, part of future updates)
  • [ManaSelf] - Used when you are below 60 mana (currently not adjustable, part of future updates)
  • [HealthGroup] - Used when a group member is below 60 health (currently not adjustable, part of future updates)
  • [HealthSelf] - Used when you are below 60 health (currently not adjustable, part of future updates)
  • [Cure] - Used when you have a detrimental that matches your cure clicky type - take care, this will nom nom nom clicky cure potions
RemoveClicky [option] Will remove an item you are holding from the specified addclicky [option].
  • [Downtime]
  • [Defensive]
  • [Offensive]
  • [Burn]
  • [Summon]
  • [ShrinkGroup]
  • [PullItem]
  • [ManaGroup]
  • [ManaSelf]
  • [HealthGroup]
  • [HealthSelf]
  • [Cure]
ShowClickies Will spit out current added/usable clickies.
Cleric BattleMode [option] BattleMode - uses contra line instead of intra line and nukes while meleeing
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
BYOS [option] "Bring Your Own Spells" and handle your own buffs
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
CheckForStuckGems [option] Try and unstick your gems in any mode other than manual mode. We use "Yaulp AA". This was to correct an EQ Bug.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
KeepHotUp [option] Keep HoTs while you have HoTs memorized, and have mobs on xtarget
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseMelee [option] Use Melee Combat
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseCelestialRegen [option] Use Celestial Regen AA during burn
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseDivineIntervention [option] Use the Divine Intervention line
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseHand [option] Use the "Hand" line of buffs (useful at lowoer lvls, since it is built in at later levels)
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseRetort [option] Use the Retort line of Spells
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseRez [option] If on, you will do rezzing.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseDivineRez [option] Sets if you want to use your Divine Rez AA.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseEpicRez [option] Sets if you want to use your Epic 1.0 for rezzing.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseRezStick [option] Uses Staff of the Forbidden Rites
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseSymbol [option] Use the Symbol line of buffs.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseVie [option] Use the Vie line of buffs
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseXTargetBuffing [option] Use XTargetBuffing (you do not need to specify which slot)
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseXTargetHealing [option] Use XTargetHealing (you do not need to specify which slot)
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
UseYaulp [option] Use Yaulp
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
MaQuickHeal [option] Sets your MA's Quick Heal threshold
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
NonMaQuickHeal [option] Sets your Non-MA's Quick Heal threshold
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
MADissident [option] Sets your MA's Composite/Dissident/Undying Heal Threshold
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
NonMADissident [option] Sets your Non-MA's Composite/Dissident/Undying Heal Threshold
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
MAPromise [option] Sets your MA Promise Heal threshold

Sets your MA's Composite/Dissident/Undying Heal Threshold

  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
NonMAPromise [option] Sets your Non-MA Promise Heal threshold.
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
MAIntervention [option] Sets your MA Intervention Heal threshold
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
NonMAIntervetnion [option] Sets your Non-MA Intervention Heal threshold
  • [no option] - Will return your current setting's value.
  • [#] - Will change your setting to the # value.
Reporting ReportCA [option] Report Combat Ability Usage
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
ReportAbility [option] Report Ability Usage.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
ReportCast [option] Report Spell casts
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
ReportAutoDrop [option] Reports Auto-Dropping
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
ReportAssist [option] Reports when we assist.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
ShowTargeting [option] Reports when we change target.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
GHBuffBot GHBuffBot [option] Toggles the Guild Hall Buff Bot Functionality
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
GHBuffSilent [option] If on, will never send anyone a tell.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
GHBuffGuildOnly [option] If on, you will require the "requester" to also be a member of your guild.
  • [no option] - will return your setting's value.
  • [true|on|1] - adjusts the setting to on.
  • [false|off|0] - adjusts the setting to off.
BuffRequestPhrase [option] Allows you to change the request phrase
  • [no option] - will return your setting's value.
  • [option] - adjusts the value to option.

Examples

This adjusts your mode to "manual" or "mode 0".

  • /clr mode 0

See also