Problem - Procedure entry point could not be found mq2main (1 Viewer)

[paman]

Hey all,

I returned from about a year break from the game. When I reloaded the launcher, I updated everything, and when I tried to launch the game through MQ2 I get this error. "The procedure entry point pTradeSkillDeptWnd could not be located in the dynamic link library". I have looked at previous threads with similar issues and tried the suggestions to fix the issue (redownloading MQ2, checking the ini file for plugins, and I verified my licenses are still valid for about another month). I am not sure where I should take my troubleshooting from here. I will attach a screenshot of the error message. Any help would be greatly appreciated!

 

[Sic]

Welcome back!

did you install mq over your old mq2 install?

I would suggest having the launcher point to a fresh location and then re-install - you can migrate settings if you do that --- or just wipe out that entire install directory and then reinstall. you don't want any old lingering and potentially conflicting files

The options to fix this are as follows:

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]


the other big thing to think about is checking if you installed any macroquest files into your everquest folder - this should not be like that

check that you don't have dlls like eqlib.dll, mq2main.dll etc in your everquest folder and delete them

 

[Boring]

I have the same error. I have not touched my EQ files/folders in months. Today, after the patch, every char logged in comes up with this error, but appears to load ok ?? I am not running iSBoxer on this computer either.

 

[Sic]

I have the same error. I have not touched my EQ files/folders in months. Today, after the patch, every char logged in comes up with this error, but appears to load ok ??

Are you sure some of yours are not plugins?

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]

 

[Boring]

Here is my screen shot. I just picked one of them but they all load with the error.

 

[Boring]

Are you sure some of yours are not plugins?

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]

So only the CWTN plugin toons are throwing the error. Regular toons not running CWTN plugins are loading w/o error.

 

[Sic]

So only the CWTN plugin toons are throwing the error. Regular toons not running CWTN plugins are loading w/o error.

yes, they are plugins that expired

it wouldn't say Mq2main.dll it would say mq2berzeker (like your screenshot) or whatever dll

the problem and solution:

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]

 

[Oldman66]

I was getting the same but it was from MQ2Paladin which I only tested. As per Sic, deleting the paladin.dll took away the login error. Thank you Sir!

 

[Boring]

Just re-subbed Zerker. Ty CWTN.

 

[LrdDread]

I'm receiving the same error every time I log in with AutoLogin, ALL 6 of my boxes are giving me the same error with MQ2Necro.dll as the culprit. I have never purchased any of the plugins, But CWTN did give me a few week trial of MQ2Berserker a couple years ago. So deleting that file will fix this? Just odd that it started doing this out of the blue...

 

[durango773]

yes, also, if you open tested MQ2necro it needs to go away.

 

[LrdDread]

I did run the open test of necro a couple days, that could be it, but it's affected all my accounts, not just the one with the necro! Many thanks!

 

[Sic]

I did run the open test of necro a couple days, that could be it, but it's affected all my accounts, not just the one with the necro! Many thanks!

It would. It is the plugin trying to be loaded as mentioned above.

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]

 

[LrdDread]

Sorry, I don't see where it's mentioned above that the plugins are trying to load. That might have been a little more helpful... And while I was in there, I did see the MQ2Paladin.dll, which I never used or tested, should that also be removed?

 

[Sic]

Sorry, I don't see where it's mentioned above that the plugins are trying to load. That might have been a little more helpful... And while I was in there, I did see the MQ2Paladin.dll, which I never used or tested, should that also be removed?

do what now?

look at several posts in this thread.

if your error is not "mq2main.dll" but instead "mq2plugin.dll" where "plugin" is anything like necro, paladin, grind, berzerker, enchanter, cleric, monk, rogue, bst, shaman, war then it is because you are trying to load a .dll in your macroquest plugins folder that does not match your MQ build (which is loaded from what you have set in your macroquest.ini unde the [Plugin] section)

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]

 

[LrdDread]

Odd, if that is in any of the above post, I can't see it and I've looked through them more than a dozen times and twice since your reply.... Guess it's something wonky on my feed. Apologies

if your error is not "mq2main.dll" but instead "mq2plugin.dll" where "plugin" is anything like necro, paladin, grind, berzerker, enchanter, cleric, monk, rogue, bst, shaman, war then it is because you are trying to load a .dll in your macroquest plugins folder that does not match your MQ build (which is loaded from what you have set in your macroquest.ini unde the [Plugin] section)

 

[ImGreg]

Odd, if that is in any of the above post, I can't see it and I've looked through them more than a dozen times and twice since your reply.... Guess it's something wonky on my feed. Apologies

it says it right here

 

[brainiac]

Just odd that it started doing this out of the blue...

Its not odd at all. It happens when we are forced to make certain kinds of changes that break binary compatibility with plugins (like with this latest patch). its normally not an issue unless you have plugins that aren't getting updates because you aren't subscribed to them.

 

[LrdDread]

Ok, I've never been good at letting sleeping dogs lie, I looked it over again and finally spotted that line I quoted above. It LOOKED like it was part of the response of "Getting Started / Returning user" response you were making to the original post. Which made me skim right past it every time I looked for it.

And no, that does not say it either in that last post quoted at me...

Again, I apologize...

 

[ImGreg]

Ok, I've never been good at letting sleeping dogs lie, I looked it over again and finally spotted that line I quoted above. It LOOKED like it was part of the response of "Getting Started / Returning user" response you were making to the original post. Which made me skim right past it every time I looked for it.

And no, that does not say it either in that last post quoted at me...

Again, I apologize...

Skim vs read seems to be the issue..

 

[LrdDread]

I said it was and apologized for it

 

[Jarlentor]

Good Evening;

I've been getting the

Procedure entry point could not be found mq2main​

error for the last two days on all my accounts. I think it is due to the fact that I used the MQ2Paladin and MQ2Necro pluggins at one time when they were being tested. The problem is, they are not in my plugins section of my launcher.
I've attached a screenshot of the launcher pluggin section to show this.

Any help would be greatly appreciated! Thank you

sincerely;

Jarlentor



WELL....... Immediately after writing this and posting it.... I thought...... "Self..... you should check the PLUGIN directory in your MQ2 folder" and there we found the two errant DLL files.....

Sorry to have caused any confusion.... Problem solved!!!!

 

[Oldman66]

Sic has posted the fix. You more than likely have a dll that is causing this. I had this as well and it was from the CWTN Pally plugin which I sampled. Once the dll was removed, all was golden again

 

[brainiac]

You should also search first.

 

[Sic]

@Turaj Steelfist

- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]

 

[Turaj Steelfist]

Thank you sir. I just wanted to make sure it was safe to delete it, if in fact that was the option I chose.

 

[paman]

Hey all.

It has been a few days since I have tried some things to fix the problem I posted earlier in the thread. I have now tried to create a new download location it did not work. I have also tried to remove MQ and the launcher completely and do a fresh install on everything which also did not work for me. I was guessing that maybe the issue could have been multiple versions of MQ conflicting. I also looked into the ini file for MQ and noticed that the plugins for example "mq2mage.dll" does not show up in the text editor when I open it. Any advice on the next steps? For reference the error:

 

[paman]

Hello everyone,

It's been a few days since I tried some of the solutions suggested in my previous thread, but unfortunately they didn't work. I attempted to create a new download location, but that didn't solve the issue. I also tried uninstalling MQ and the launcher and performing a fresh installation of everything, but the error persists.

Initially, I thought the error might have been caused by conflicting MQ downloads, but with everything uninstalled, I'm not sure if that was the issue. Upon checking the ini file for MQ, I noticed that some plugins, such as "mq2mage.dll," are not showing up in the text editor when I open it. That is after I reinstalled the MQ2Mage plugin via the launcher.

Do you have any advice on what my next steps should be? Here's the error message for reference:

 

[brainiac]

check that you don't have dlls like eqlib.dll, mq2main.dll etc in your everquest folder

 

[Sic]

Please don't repost.

 

[paman]

I did have mq2main.dll and eqlib.dll in my Everquest folder. I removed them and now am receiving this error:

 

[brainiac]

I did have mq2main.dll and eqlib.dll in my Everquest folder. I removed them and now am receiving this error:
View attachment 46534

it sounds like at some point you installed macroquest into your everquest folder. I recommend creating a new everquest folder, as there are likely tons of macroquest files in there now that shouldn't be there..

 

[paman]

That was my suspicion after your previous suggestion. I went ahead and deleted the Everquest folder, then reinstalled everything, and that seems to have fixed the problem! I appreciate all the help!